What did you get done? 4/22/07 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

IvelDesigns · 04-23-2007, 12:11 AM

saturday was my brothers wedding, so that consumed most of the day.

today I flipped my carrier bearing mount and got my trailing arms installed with new bushings and paint after getting media blasted. I also finished removing the rear springs. after that, i did a mock up of my home made lowering block and new U bolts.

Big D · 04-23-2007, 01:20 AM

I put rockers on my 70 SWB that I making my daily driver. This morning I came out to find somebody had helped themself to the stereo out it. Thats just fine ,it didnt work anyway and they didnt do any damage to the dash. I hope the moron doesnt come back and try to steal the non working cassette out of my other truck!

I started cleaning out my 72 C-20 and started disassembling it. I'll probably pull the front clip and bed off this week. Next weekend I hope to have cab corners and rockers on it.

Hey IvelDesigns , Is that a 2" piece of tube youre using? I was thinking about doing the same to my SWB. I'm trying to keep the truck low buck.

tavenner13 · 04-23-2007, 01:32 AM

i learned that cubic Inches = (Bore x Bore x Stroke x Number of Cylinders x .7854). probably the coolest thing ive learned in a long time. and im in college

**stllookn** · 04-23-2007, 03:07 AM

Heart transplant. Loaner 327 to sb 400.

Sport/Truck · 04-23-2007, 07:18 AM

The weather finally worked in my favor & I was able to roll it out to start to clean the engine bay. I think I need a hot water pressure washer to get it better. But the Napa engine degreaser worked best.
I’m also going to drop the inner fender wells too.
s/t

IvelDesigns · 04-23-2007, 09:53 AM

Quote:

Originally Posted by Big D

Hey IvelDesigns , Is that a 2" piece of tube youre using? I was thinking about doing the same to my SWB. I'm trying to keep the truck low buck.

i replied to this in my truck build thread:

http://www.67-72chevytrucks.com/vboa...09#post2140809

Imacarguytoo · 04-23-2007, 10:23 AM

Got up saturday morning early. Went garage saling with the kids and wife. I did get some rear Onkyo rear channel speaks for my surround sound for 1.00. (no tools which is what i was after) Went to the inlaws. He gave me some rear u-bolts for the diff. Swapped steering wheels with him and installed his. Fixed the p/s on his truck. lol Its not even my truck anymore and im still working on it!!!!
Sunday got up early. Burned all the brush i had from a job last week. Went to Mcdonalds for breakfast. Got another account for mowing. Got a free dishwasher. Worked on the 67 (finally). I took the material my father inlaw put on, off and repainted the door card black. Used some zipties and seperated my plugwires, realigned the hood. Cleaned up the wiring a lil in the engine bay.
The whole interior is brown with some funky colored material on the door cards and the seat.

cheyenne402 · 04-23-2007, 10:30 AM

Installed tranny in beater 1991 2-wheel drive ext-cab. Pulled seized 305 out of my son's 1986 c-10. (I am hoping he's learned his lesson on checking oil.) Did some re-organizing in garage. Also did a little electrical wiring for an outside outlet box. Always more projects looming and to-do-list is never completed.

OlChev67 · 04-23-2007, 10:33 AM

Brother came up, went catfishin didnt catch a thing but a buzz. But had fun cruisin some dirt roads. Washed brake dust off rims, and cleaned front bumper. Almost washed the whole truck, but its not worth it, the only shiny thing is the front bumper anyways. Sunday took brothers 18' catamaran out to lake keowee then came home and grilled.

DUD2STUD · 04-23-2007, 10:49 AM

Shaved the heater vents in the engine compartment and removed every thing under the dash

**Hart_Rod** · 04-23-2007, 11:57 AM

Quote:

Originally Posted by IvelDesigns

saturday was my brothers wedding, so that consumed most of the day.

today I flipped my carrier bearing mount and got my trailing arms installed with new bushings and paint after getting media blasted. I also finished removing the rear springs. after that, i did a mock up of my home made lowering block and new U bolts.

Why did you flip the carrier bearing mount? I'm guessing it has something to do with lowering it. Do you have a part number ofr the carrier bearing? Thanks,

LOW DOUGH · 04-23-2007, 12:55 PM

Removed the tilt steering column from my parts 69 to go in Project Low Dough 71.

sleepyboy · 04-23-2007, 01:09 PM

Quote:

Originally Posted by Troy-Built

I like the GTX

me too

NONHOG · 04-23-2007, 01:40 PM

Spent thursday and friday eve. digging up the old gravel driveway
spent saturday pouring concrete (too old for that) and hanging sheetrock
(too old for that too)
used the truck for hauling tools
oh some possible good news a friend of my wife wants to sell her 70something
PU with a 434 (?) and bad trans . I'm hoping thats a 454 we'll see !

manimal · 04-23-2007, 01:50 PM

Saturday, worked on the BBQ trailer. Got the firewood storage built and enclosed with expanded metal.
Sunday, delivered Dana60 front axle to buyer locally-made a 1000 bones!

-Lance

IvelDesigns · 04-23-2007, 01:54 PM

Quote:

Originally Posted by Hart_Rod

Why did you flip the carrier bearing mount? I'm guessing it has something to do with lowering it. Do you have a part number ofr the carrier bearing? Thanks,

i replied to this in my truck build thread:

http://www.67-72chevytrucks.com/vboa...09#post2140809

stingray72 · 04-23-2007, 02:01 PM

I finally found the battery drain on my Jimmy. I didn't realize the voltage regulator would drain the battery when it went bad. took me an hour to find that out

kombreeze · 04-23-2007, 03:15 PM

Well Friday I Prepped a pig for Saturdays festivities. Saturday Morning woke up at the crack of dawn to cook a pig in the ground...mmmm Later that morning my buddy and I went to one of our biggest car shows. The kids and I had a great time. I saw a few Super Cheyenes and about 6 Cover Trucks from Classic Trucks or Custom Classic Trucks. Later that night All the Cubans, Puerto Ricans, and Mexicans got together for a small family reunion. Mariachis and Salsa Dancing the whole night....Sunday I worked but got together with the family early morning Menudo and Played basketball with Fresno Finest....tired today...
Skipped out on a company dinner sunday night...rather be the people I care about...

sjarrett71 · 04-29-2007, 01:03 AM

Sorry about the late reply but I went to my Grandfather's funeral in Loveland Colorado. It was a 13 hour drive from Missouri. He was real cool guy, a WWII and Korea veteran. Grandma gave me his medals. He entered the army air corps as an E-1 and worked his way up to Captain before he retired from the Air Force. The military burial service was awesome, fast but awesome. He and my grandmother had been married since 1943. He passed away in his sleep. He led a full life. It was somthing that we all knew would happen eventually but wished it never would.

I did see lots of nice trucks out there though.

04-23-2007, 12:11 AM	#26
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: What did you get done? 4/22/07 saturday was my brothers wedding, so that consumed most of the day. today I flipped my carrier bearing mount and got my trailing arms installed with new bushings and paint after getting media blasted. I also finished removing the rear springs. after that, i did a mock up of my home made lowering block and new U bolts. Attached Images __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

04-23-2007, 01:20 AM	#27
Big D Registered User Join Date: Apr 2005 Location: Dunlap, IL Posts: 308	Re: What did you get done? 4/22/07 I put rockers on my 70 SWB that I making my daily driver. This morning I came out to find somebody had helped themself to the stereo out it. Thats just fine ,it didnt work anyway and they didnt do any damage to the dash. I hope the moron doesnt come back and try to steal the non working cassette out of my other truck! I started cleaning out my 72 C-20 and started disassembling it. I'll probably pull the front clip and bed off this week. Next weekend I hope to have cab corners and rockers on it. Hey IvelDesigns , Is that a 2" piece of tube youre using? I was thinking about doing the same to my SWB. I'm trying to keep the truck low buck. __________________ 68 GMC 64 1/2 Mustang convert A bachelor's life is no life for a single man." - Samuel Goldwyn

04-23-2007, 01:32 AM	#28
tavenner13 Registered User Join Date: Mar 2007 Location: Tyler, Texas Posts: 559	Re: What did you get done? 4/22/07 i learned that cubic Inches = (Bore x Bore x Stroke x Number of Cylinders x .7854). probably the coolest thing ive learned in a long time. and im in college

04-23-2007, 03:07 AM	#29
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,463	Re: What did you get done? 4/22/07 Heart transplant. Loaner 327 to sb 400. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 04-23-2007 at 03:08 AM.

04-23-2007, 07:18 AM	#30
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: What did you get done? 4/22/07 The weather finally worked in my favor & I was able to roll it out to start to clean the engine bay. I think I need a hot water pressure washer to get it better. But the Napa engine degreaser worked best. I’m also going to drop the inner fender wells too. s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe. Last edited by Sport/Truck; 10-04-2007 at 08:09 PM.

04-23-2007, 10:23 AM	#32
Imacarguytoo Registered User Join Date: Nov 2006 Location: Illinois Posts: 306	Re: What did you get done? 4/22/07 Got up saturday morning early. Went garage saling with the kids and wife. I did get some rear Onkyo rear channel speaks for my surround sound for 1.00. (no tools which is what i was after) Went to the inlaws. He gave me some rear u-bolts for the diff. Swapped steering wheels with him and installed his. Fixed the p/s on his truck. lol Its not even my truck anymore and im still working on it!!!! Sunday got up early. Burned all the brush i had from a job last week. Went to Mcdonalds for breakfast. Got another account for mowing. Got a free dishwasher. Worked on the 67 (finally). I took the material my father inlaw put on, off and repainted the door card black. Used some zipties and seperated my plugwires, realigned the hood. Cleaned up the wiring a lil in the engine bay. The whole interior is brown with some funky colored material on the door cards and the seat. __________________ '67 C20 Lwb 350 4-Speed '01 Chrysler Concorde LXI (wifes ride) '91 Gmc Suburban 3/4 2wd 454 Tbi '51 Jeep Cj3a "Willys" 350 V8

04-23-2007, 10:30 AM	#33
cheyenne402 Registered User Join Date: Jul 2005 Location: Owosso, Michigan Posts: 783	Re: What did you get done? 4/22/07 Installed tranny in beater 1991 2-wheel drive ext-cab. Pulled seized 305 out of my son's 1986 c-10. (I am hoping he's learned his lesson on checking oil.) Did some re-organizing in garage. Also did a little electrical wiring for an outside outlet box. Always more projects looming and to-do-list is never completed.

04-23-2007, 10:33 AM	#34
OlChev67 Ever heard of Beech Island?? Join Date: Apr 2007 Location: Clemson, SC Posts: 327	Re: What did you get done? 4/22/07 Brother came up, went catfishin didnt catch a thing but a buzz. But had fun cruisin some dirt roads. Washed brake dust off rims, and cleaned front bumper. Almost washed the whole truck, but its not worth it, the only shiny thing is the front bumper anyways. Sunday took brothers 18' catamaran out to lake keowee then came home and grilled.

04-23-2007, 10:49 AM	#35
DUD2STUD Registered User Join Date: Mar 2007 Location: Rohnert park, CA Posts: 139	Re: What did you get done? 4/22/07 Shaved the heater vents in the engine compartment and removed every thing under the dash

04-23-2007, 12:55 PM	#37
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: What did you get done? 4/22/07 Removed the tilt steering column from my parts 69 to go in Project Low Dough 71.

04-23-2007, 01:40 PM	#39
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,416	Re: What did you get done? 4/22/07 Spent thursday and friday eve. digging up the old gravel driveway spent saturday pouring concrete (too old for that) and hanging sheetrock (too old for that too) used the truck for hauling tools oh some possible good news a friend of my wife wants to sell her 70something PU with a 434 (?) and bad trans . I'm hoping thats a 454 we'll see ! __________________ "I feel the need for speed!"... as soon as I am done with my nap.

04-23-2007, 01:50 PM	#40
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: What did you get done? 4/22/07 Saturday, worked on the BBQ trailer. Got the firewood storage built and enclosed with expanded metal. Sunday, delivered Dana60 front axle to buyer locally-made a 1000 bones! -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

04-23-2007, 02:01 PM	#42
stingray72 Red Headed Step Child Join Date: Oct 2003 Location: Atlanta, GA Posts: 1,216	Re: What did you get done? 4/22/07 I finally found the battery drain on my Jimmy. I didn't realize the voltage regulator would drain the battery when it went bad. took me an hour to find that out __________________ "Dinner, the perfect break between work and drunk" -Homer Simpson

04-23-2007, 03:15 PM	#43
kombreeze Registered User Join Date: Jul 2006 Location: Fresno, Ca Posts: 154	Re: What did you get done? 4/22/07 Well Friday I Prepped a pig for Saturdays festivities. Saturday Morning woke up at the crack of dawn to cook a pig in the ground...mmmm Later that morning my buddy and I went to one of our biggest car shows. The kids and I had a great time. I saw a few Super Cheyenes and about 6 Cover Trucks from Classic Trucks or Custom Classic Trucks. Later that night All the Cubans, Puerto Ricans, and Mexicans got together for a small family reunion. Mariachis and Salsa Dancing the whole night....Sunday I worked but got together with the family early morning Menudo and Played basketball with Fresno Finest....tired today... Skipped out on a company dinner sunday night...rather be the people I care about... __________________ 68 chevy truck 70 Datsun 510 2000 Nissan Sentra 2006 Toyo Camry Soon 69 Firebird 400 Convertible I'm getting it back Soon Trailblazer or 4 Runner

04-29-2007, 01:03 AM	#44
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: What did you get done? 4/22/07 Sorry about the late reply but I went to my Grandfather's funeral in Loveland Colorado. It was a 13 hour drive from Missouri. He was real cool guy, a WWII and Korea veteran. Grandma gave me his medals. He entered the army air corps as an E-1 and worked his way up to Captain before he retired from the Air Force. The military burial service was awesome, fast but awesome. He and my grandmother had been married since 1943. He passed away in his sleep. He led a full life. It was somthing that we all knew would happen eventually but wished it never would. I did see lots of nice trucks out there though. __________________ -Scott- Last edited by sjarrett71; 04-29-2007 at 01:04 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.