What did you do to your truck today.The 3rd chapter - Page 94 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**allchevy58** · 08-14-2021, 11:10 PM

Safelite installed new windshield and back window. They did a nice job.

cab4word67 · 08-15-2021, 11:59 AM

that truck is coming along well

**Ol Blue K20** · 08-15-2021, 01:38 PM

Looking good!

**pjmoreland** · 08-15-2021, 01:45 PM

Quote:

Originally Posted by OregonNed

And finished

Looks nice and clean like the rest of your truck. You're gonna have to get some new wundow stickers now.

OregonNed · 08-15-2021, 08:41 PM

Quote:

Originally Posted by pjmoreland

Looks nice and clean like the rest of your truck. You're gonna have to get some new wundow stickers now.

Thanks! I just picked up
A new NW C10s sticker at our truck meet

OregonNed · 08-15-2021, 08:43 PM

Changing gear oil at 500 miles. Tweaked the cover trying to get it off (was well sealed!) waiting on a new cover to refill it again.

67C10Step · 08-15-2021, 09:13 PM

Small progress on Saturday. Had to do an oil change in my daughters car and some other routine maintenance on the rest of the fleet.

**allchevy58** · 08-15-2021, 09:33 PM

Today got the headliner in, wipers, sill plates and the paint divider moulding on.

FL71C10 · 08-16-2021, 01:19 AM

F I N A L L Y got the windshield installed in my truck. Had a hard time finding anyone to do it due to the age. I finally found someone and they had a guy come out who didn't know what he was doing and bent up my stainless trim. I got some more trim and polished it up. The owner of the company kept calling me and apologizing and promising to make it right but he kept having one calamity after another (not sure they were legit reasons but...). Finally he gets a guy he uses to come out supposedly Friday then Saturday and finally he shows up today and does a great job and is done in less than an hour. Amazing when someone knows what they are doing.

**Rich72C10** · 08-16-2021, 08:45 PM

I haven't done it yet but just won on eBay these rad NOS Pair of 67-72 Chevrolet GMC C/K 10 Front Bumper Guards!

Think I got a smoken't deal @$133.00 Shipped!

Hotcorner · 08-16-2021, 08:55 PM

Allchevy58, that’s a nice truck. Very nice!

Mike80D · 08-16-2021, 09:04 PM

Installed the 6 cyl. single exhaust kit from LMC. Down pipe is a tad long, and tail pipe a tad short for me, but in all a huge improvement over what I had. Got the turbo muffler. Has a nice little tone to it. Rattle canned the wheels, and did a paint pen makeover on the caps. She’s good from far, and far from good.

**allchevy58** · 08-16-2021, 10:53 PM

Quote:

Originally Posted by cab4word67

that truck is coming along well

Quote:

Originally Posted by Hotcorner

Allchevy58, that’s a nice truck. Very nice!

Thanks, I'm very happy! Almost there.

**va72longhorn** · 08-17-2021, 05:23 AM

Quote:

Originally Posted by allchevy58

Thanks, I'm very happy! Almost there.

Where did you get your seat cover from, if you don’t mind? The interior is looking great.

**Jiggers72-GMC** · 08-17-2021, 07:02 AM

Rich, nice score on the bumper guards.

**Rich72C10** · 08-17-2021, 08:02 AM

Quote:

Originally Posted by Rich72C10

I haven't done it yet but just won on eBay these rad NOS Pair of 67-72 Chevrolet GMC C/K 10 Front Bumper Guards!

Think I got a smoken't deal @$133.00 Shipped!

Quote:

Originally Posted by Jiggers72-GMC

Rich, nice score on the bumper guards.

Thanks Jiggers - I didn't think I'd get them for under $150.00. There was one bider that came in early and there were a number of watchers. But I was the only one that popped in near the end and the 1st bider I beat out on my 1st bid. Hoping to get them by Saturday but the seller is on the road and won't get them into the post until Wednesday.

Got some bed rails from To Much Stuff on the way too but those need a little clean up (also bought hardware kit and wood decals off eBay). With the Bumpers and Rails installed, I think the truck will look snappy. Very excited for these add-ons :-)

Indyuke · 08-17-2021, 04:24 PM

Painted up some steel wheels, polished and painted some hubcaps to mimic '68 doggy caps, new tires and installed on the truck.

**allchevy58** · 08-17-2021, 10:21 PM

Quote:

Originally Posted by va72longhorn

Where did you get your seat cover from, if you don’t mind? The interior is looking great.

Nobody made the original seat covers, so I got the original material from SMS Auto Fabrics in Canby, Oregon. Took pictures of the original style and had my upholsterer do it.

**va72longhorn** · 08-19-2021, 05:20 PM

Looking like I’ll have to do the same. I need to start shopping upholsterers.....

**Rich72C10** · 08-21-2021, 04:34 PM

Front bumpers received and installed. But they didn’t come with the bottom brace - I don’t think they’ll move.

Edit:
Forgot to add, I had to cut out notches on my shop table at the bottom. My garage door bracket was going to scrape my back bumper. Now after notching my shop table, I have like 1/4 inch between the garage door bracket and the back bumper! I really need a SWB Truck, LOL!

body bolt · 08-21-2021, 04:44 PM

Didn't think to post this 2 weeks ago but my truck got all new tires, Hankook Dynapro HT RH12 LT235/75R15 6 ply load range C. I like them.

OregonNed · 08-21-2021, 09:27 PM

Bought one of the new black powdercoated 12 bolt covers and gave her the 500 mile gear oil
Change (after the recent rebuild)

NoStopN · 08-22-2021, 07:37 AM

I guess I'm slacking here. Back on July 31, I got a new carb for the old 250. It didn't run spot on right out of the box & my schedule has been super tight. Got around to tuning on it last week & took it down the road for a quick spin. I was most pleased. Friday, I got the plates renewed for the year. Wait, did I do some of those steps out of sequence? Lol.

FL71C10 · 08-22-2021, 07:33 PM

Got my drivers side door glass installed along with the door panel. I still have to put in the door fuzzies but I have to trim them a little bit and ran out of gas.

Passenger side next weekend! ??

**Already Gone** · 08-22-2021, 08:08 PM

Didn't do it today but yesterday.Was planning on taking my C10 to our Annual Big Event Car Show yesterday afternoon. Bought my TT2's and new tires in July and had them mounted and balanced and were sitting waiting. Had a few hours to kill before the Show so got my ass in gear went and picked them up at my storage garage and installed them. Glad I did. Before and after pics.

08-14-2021, 11:10 PM	#2326
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,424	Re: What did you do to your truck today.The 3rd chapter Safelite installed new windshield and back window. They did a nice job. Attached Images __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1964 C-30 383/4 speed, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

08-15-2021, 11:59 AM	#2327
cab4word67 Registered User Join Date: Sep 2020 Location: portland oregon Posts: 183	Re: What did you do to your truck today.The 3rd chapter that truck is coming along well

08-15-2021, 01:38 PM	#2328
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: What did you do to your truck today.The 3rd chapter Looking good! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

08-15-2021, 08:43 PM	#2331
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter Changing gear oil at 500 miles. Tweaked the cover trying to get it off (was well sealed!) waiting on a new cover to refill it again. Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

08-15-2021, 09:13 PM	#2332
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,405	Re: What did you do to your truck today.The 3rd chapter Small progress on Saturday. Had to do an oil change in my daughters car and some other routine maintenance on the rest of the fleet. Attached Images __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2020 Toyota CH-R 2020 Acura MDX

08-15-2021, 09:33 PM	#2333
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,424	Re: What did you do to your truck today.The 3rd chapter Today got the headliner in, wipers, sill plates and the paint divider moulding on. Attached Images __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1964 C-30 383/4 speed, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

08-16-2021, 01:19 AM	#2334
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,506	Re: What did you do to your truck today.The 3rd chapter F I N A L L Y got the windshield installed in my truck. Had a hard time finding anyone to do it due to the age. I finally found someone and they had a guy come out who didn't know what he was doing and bent up my stainless trim. I got some more trim and polished it up. The owner of the company kept calling me and apologizing and promising to make it right but he kept having one calamity after another (not sure they were legit reasons but...). Finally he gets a guy he uses to come out supposedly Friday then Saturday and finally he shows up today and does a great job and is done in less than an hour. Amazing when someone knows what they are doing. Attached Images __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

08-16-2021, 08:45 PM	#2335
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,643	Re: What did you do to your truck today.The 3rd chapter I haven't done it yet but just won on eBay these rad NOS Pair of 67-72 Chevrolet GMC C/K 10 Front Bumper Guards! Think I got a smoken't deal @$133.00 Shipped! Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

08-16-2021, 08:55 PM	#2336
Hotcorner Registered User Join Date: Apr 2017 Location: Knoxville, Tennessee Posts: 892	Re: What did you do to your truck today.The 3rd chapter Allchevy58, that’s a nice truck. Very nice! __________________ 1969 GMC K25 2007 Chevy 2500HD Classic Duramax 1999 Tahoe 2DR 4WD Base Model 5.7l

08-16-2021, 09:04 PM	#2337
Mike80D Registered User Join Date: Jul 2021 Location: Crab Orchard KY Posts: 283	Re: What did you do to your truck today.The 3rd chapter Installed the 6 cyl. single exhaust kit from LMC. Down pipe is a tad long, and tail pipe a tad short for me, but in all a huge improvement over what I had. Got the turbo muffler. Has a nice little tone to it. Rattle canned the wheels, and did a paint pen makeover on the caps. She’s good from far, and far from good. Attached Images

08-17-2021, 07:02 AM	#2340
Jiggers72-GMC Senior Member Join Date: Mar 2021 Location: up North Posts: 540	Re: What did you do to your truck today.The 3rd chapter Rich, nice score on the bumper guards. __________________ Gerry, North Bay Ontario 1971 Chevy K10 short stepper, 518 med green & white 1972 GMC C1500 long box, dark Brown, owned since 1977 1969 GMC C2500 manual

08-17-2021, 04:24 PM	#2342
Indyuke Registered User Join Date: Feb 2008 Location: Lake Stevens, WA Posts: 623	Re: What did you do to your truck today.The 3rd chapter Painted up some steel wheels, polished and painted some hubcaps to mimic '68 doggy caps, new tires and installed on the truck. Attached Images

08-19-2021, 05:20 PM	#2344
va72longhorn Senior Member Join Date: Dec 2009 Location: Culpeper, VA Posts: 430	Re: What did you do to your truck today.The 3rd chapter Looking like I’ll have to do the same. I need to start shopping upholsterers.....

08-21-2021, 04:34 PM	#2345
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,643	Re: What did you do to your truck today.The 3rd chapter Front bumpers received and installed. But they didn’t come with the bottom brace - I don’t think they’ll move. Edit: Forgot to add, I had to cut out notches on my shop table at the bottom. My garage door bracket was going to scrape my back bumper. Now after notching my shop table, I have like 1/4 inch between the garage door bracket and the back bumper! I really need a SWB Truck, LOL! Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| Upgraded Fully Super Trim Last edited by Rich72C10; 08-21-2021 at 05:01 PM.*

08-21-2021, 04:44 PM	#2346
body bolt Registered User Join Date: Oct 2020 Location: Albuquerque, New Mexico Posts: 475	Re: What did you do to your truck today.The 3rd chapter Didn't think to post this 2 weeks ago but my truck got all new tires, Hankook Dynapro HT RH12 LT235/75R15 6 ply load range C. I like them.



Register or Log In To remove these advertisements.

08-21-2021, 09:27 PM	#2347
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter Bought one of the new black powdercoated 12 bolt covers and gave her the 500 mile gear oil Change (after the recent rebuild) Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

08-22-2021, 07:37 AM	#2348
NoStopN Registered User Join Date: Jul 2016 Location: Murfreesboro, TN Posts: 229	Re: What did you do to your truck today.The 3rd chapter I guess I'm slacking here. Back on July 31, I got a new carb for the old 250. It didn't run spot on right out of the box & my schedule has been super tight. Got around to tuning on it last week & took it down the road for a quick spin. I was most pleased. Friday, I got the plates renewed for the year. Wait, did I do some of those steps out of sequence? Lol. __________________ 1969 GMC 2500. 250 I6, 4-speed w/ granny low

08-22-2021, 07:33 PM	#2349
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,506	Re: What did you do to your truck today.The 3rd chapter Got my drivers side door glass installed along with the door panel. I still have to put in the door fuzzies but I have to trim them a little bit and ran out of gas. Passenger side next weekend! ?? Attached Images __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

08-22-2021, 08:08 PM	#2350
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,073	Re: What did you do to your truck today.The 3rd chapter Didn't do it today but yesterday.Was planning on taking my C10 to our Annual Big Event Car Show yesterday afternoon. Bought my TT2's and new tires in July and had them mounted and balanced and were sitting waiting. Had a few hours to kill before the Show so got my ass in gear went and picked them up at my storage garage and installed them. Glad I did. Before and after pics. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

Register or Log In To remove these advertisements.