New! Baer ReMaster Master Cylinder

[Pro Performance]

Baer has finally released their new Master Cylinder, and will be available January 1st, with pre-orders being available. There is an option to add the prop valve mount right into the bottom of the master, along with multiple finish options to match your truck. One of the nicest master cylinders around, and is fully machined in the USA.

• Compact billet body makes fitment easier while providing the high performance Baer® is known for
• Engineered for optimum balance between pressure and volume for great braking performance with reasonable brake-pedal effort
• Fully machined body with bolt-on mount and screw-on billet caps
• Available with and without Baer billet adjustable proportioning valve

Contact us for some special pre-order pricing.

http://baer.com/Remaster.html

https://www.youtube.com/watch?v=r3WPS2UPnvw

[Pro Performance]

[Pro Performance]

Ttt

[Pro Performance]

TTT. Here is a picture of the standard industrial gray finish with black top.

[Gipper01]

Hi Travis, that's a really nice looking Master Cylinder from Baer. Are there any mounting challenges with the master cylinder for our 1967-72 C10, particularly for those with a Dropmember. Also, would you happen to have any pics of the Baer billet adjustable proportioning valve. Perhaps I'll pull the trigger on this setup if it doesn't pose unique mounting/installation challenges.

Thanks in advance for the response.

[Pro Performance]

Baer did a really nice job on this master, and very well though out. It does mount up on a 67-72 without issues, and can be used with or without a booster. I will be using one on my truck with the drop member. I found I needed a 9" booster to clear the LS coil packs on the valve covers.

Here is a picture of the Baer prop valve.

[Pro Performance]

[abraham.hd]

Nice.

[Pro Performance]

Thanks.... Baer did a really nice job on this master cylinder.