|
08-19-2011, 12:20 AM | #1 |
Home Built '87
Join Date: May 2010
Location: Calgary, Alberta Canada
Posts: 1,829
|
Re: 1982 C10 swb "SS"
Were you able to use the fittings as is or needed to use adapters on the lines?
__________________
Gordon 1998 White Chev ext cab 2WD (Summer Project) http://67-72chevytrucks.com/vboard/s...d.php?t=408424 1987 Chev Silverado SWB (Winter Project Rebuild) http://67-72chevytrucks.com/vboard/s...d.php?t=424833 Truck Club http://67-72chevytrucks.com/vboard/s...d.php?t=466969 |
08-19-2011, 07:59 AM | #2 |
Registered User
Join Date: Jun 2004
Location: El Lago, TX
Posts: 1,668
|
Re: 1982 C10 swb "SS"
I just swapped to a serpintine belt setup from a 1990 Suburban. From what i can tell the power steering pump looks just like this one. I used the lines from my 87' and everything was the same.
Posted via Mobile Device |
08-19-2011, 08:57 AM | #3 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Re: 1982 C10 swb "SS"
I was able to use the fittings as is, I don't think they have changed the power steering fittings at least since the 80's, and the pumps are almost exactly the same too.
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
08-21-2011, 11:25 AM | #4 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Well I got some new pictures. I finally got some parts in the mail. So I have everything to run all the lines. I am waiting on a shift kit before I get the transmission swapped, so I'm not sure when that will be, but won't be too long. I also got FI rated hose clamps yesterday so I'm going to get those put on today. Here are some pictures:
Here is what the back of the p/s pump looks like: The fuel rail adapter fitting as well as a straight an fitting: Some clean up on the transmission:
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
08-21-2011, 09:13 PM | #5 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Re: 1982 C10 swb "SS"
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
08-21-2011, 09:15 PM | #6 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Re: 1982 C10 swb "SS"
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
08-25-2011, 12:43 AM | #7 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Got the belt on today. Transmission swap parts are coming tomorrow and I ordered a shift kit today so I should have the trans done in two weeks or so.
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
08-25-2011, 11:53 PM | #9 |
Registered User
Join Date: Aug 2011
Location: Dallas TX
Posts: 563
|
Re: 1982 C10 swb "SS"
great project....
|
08-30-2011, 08:14 PM | #10 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Re: 1982 C10 swb "SS"
thanks...got a few more pics
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
08-30-2011, 09:06 PM | #11 |
Registered User
Join Date: Dec 2010
Location: louisville ohio
Posts: 375
|
Re: 1982 C10 swb "SS"
lotso progress, lookin good too!
__________________
my build 77 gmc shortbed big block, http://67-72chevytrucks.com/vboard/s...d.php?t=438237 |
09-09-2011, 09:19 AM | #12 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Re: 1982 C10 swb "SS"
thanks, should be taking the transmission tomorrow to get the shift kit and it converted from awd to 2wd
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
09-14-2011, 12:28 PM | #13 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Re: 1982 C10 swb "SS"
well dropped the trans off yesterday...hopefully it will get done before the weekend, but we'll see
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
10-06-2011, 08:39 PM | #14 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Re: 1982 C10 swb "SS"
Should have some info to update after this weekend. Finally getting a chance to go home and work on the truck. Got the transmission back with the shift kit, servo's, and conversion done. Would put it back in the truck, but have decided to go with a 3200 rpm torque converter before it goes back in. So I'll be waiting on that before the trans goes back on.
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
10-09-2011, 10:02 AM | #15 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
10-09-2011, 10:04 AM | #16 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Re: 1982 C10 swb "SS"
Bolted the trans on without a converter just so it could roll, looks so much better just with a trans sitting there. Should have more work done next weekend.
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
10-25-2011, 12:06 PM | #17 |
Formerly- 1972SuperCheyenne
Join Date: Oct 2008
Location: Wake Forest NC
Posts: 5,782
|
Re: 1982 C10 swb "SS"
Coming along nicely buddy.
__________________
--Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. |
10-25-2011, 06:52 PM | #18 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Re: 1982 C10 swb "SS"
thanks, hopefully ordering my stall converter soon...then trans will go on for the final time and I can figure out what I'm going to do for a trans x-member. I have decided to use the stock manifolds for now due to not finding a pair of long tube headers that will fit without lots of modification for a decent price. I will eventually upgrade down the road when I do some performance upgrades.
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
10-26-2011, 02:01 AM | #19 |
Registered User
Join Date: Jan 2011
Location: San Bruno, CA.
Posts: 348
|
Re: 1982 C10 swb "SS"
Looking good so far man!
Posted via Mobile Device
__________________
1975 Chevy Cheyenne w/ v8 350 and TH350 Siverado interior Fleetside bed aka "The Beast" aka "Cheyerado" |
10-27-2011, 08:20 AM | #20 |
Registered User
Join Date: Mar 2011
Location: Midvale, Utah
Posts: 220
|
Re: 1982 C10 swb "SS"
Cleaning the fire wall sure is a pain in the butt!
__________________
I LIKE TRUCKS 1986 GMC Suburban Build Build link 1982 Chevy SWB 2wd Scottsdale, Build Link Sold 1987 Jimmy Build, Project Cheap A$$ Build Link |
10-27-2011, 10:45 AM | #21 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Re: 1982 C10 swb "SS"
It really is lol by the way your paint looks really good, I love the color
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
11-13-2011, 06:10 PM | #22 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Re: 1982 C10 swb "SS"
No new progress to report. Making lists of everything I still need. Hopefully I will get time to work on the truck over Thanksgiving. Looking for purchasing a complete set of bushings and hardware. Has anyone had any problem with LMC for mounts?
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
12-13-2011, 04:04 PM | #23 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Re: 1982 C10 swb "SS"
Progress should really pick up after Thursday when I'm home for a month. I got a trans cooler, stall converter, and headers in to put on and then on to some bodywork.
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
12-13-2011, 04:05 PM | #24 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Re: 1982 C10 swb "SS"
Anyone have any opinions on paint? I was thinking about going with GM Atomic Orange Metallic...anyone have any other suggestions?
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
12-18-2011, 12:37 PM | #25 |
Registered User
Join Date: Feb 2009
Location: New Park, PA
Posts: 312
|
Well got some progress done yesterday. I mocked up the headers and they were hitting the lower control arm a little so I decided to move the engine back so with doing so I wanted to make sure the cab would clear so I placed the cab back on. I finally got the transmission on for the final time after I installed a circle d specialties 3200 rpm stall converter. I did happen to break the piece of plastic on the starter so I guess I'll need a new starter. My plan the next couple days is to get the radiator support cleaned up and sandblasted again, and figure out how to mount the trans cooler and then get it painted and put on the truck...we will see how that goes.
__________________
Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860 |
Bookmarks |
|
|