MO Parting this original 70 GMC 3/4 ton, starting Sunday.

[specialtyretail]

Originally Posted by leddzepp

Thanks for the pics Fred. I found a set locally in about the same condition so I'll pass. Good luck with your sales.

Good deal, you found the parts you were needing, that is the main thing. Thanks, Fred.

[57taskforce]

How about the automatic brake pedal assembly and the parts to mount the steering column to the dash.

[specialtyretail]

Originally Posted by 57taskforce

How about the automatic brake pedal assembly and the parts to mount the steering column to the dash.

Let me look at those Monday afternoon for you. Are you needing the plate, u-bracket and the bracket where the rubber grommet is?

[57taskforce]

Originally Posted by specialtyretail

Let me look at those Monday afternoon for you. Are you needing the plate, u-bracket and the bracket where the rubber grommet is?

Originally Posted by specialtyretail

Let me look at those Monday afternoon for you. Are you needing the plate, u-bracket and the bracket where the rubber grommet is?

Sorry should have been more specific. I've got the lower plate and rubber that screw to the fire wall and I've got the upper rubber that goes in the dash but I don't have what ever holds the column to the dash if that makes sense.i believe i need the u-bracket and the bolts holding it on. When I got the truck the column was in the seat, with the parts I described so I'm not too sure what I'm missing.

Also for the pedal assembly, all I've got is the bracket bolted to the fire wall and dash with the pedal and linkage removed. (Booster and mc are still bolted to the firewall) If there's any way I could just get those parts that would be good, however I do understand if your wanting to sell as an assembly.

Shipping to 87455

[specialtyretail]

Originally Posted by 57taskforce

Sorry should have been more specific. I've got the lower plate and rubber that screw to the fire wall and I've got the upper rubber that goes in the dash but I don't have what ever holds the column to the dash if that makes sense.i believe i need the u-bracket and the bolts holding it on. When I got the truck the column was in the seat, with the parts I described so I'm not too sure what I'm missing.

Also for the pedal assembly, all I've got is the bracket bolted to the fire wall and dash with the pedal and linkage removed. (Booster and mc are still bolted to the firewall) If there's any way I could just get those parts that would be good, however I do understand if your wanting to sell as an assembly.

Shipping to 87455

I think I know exactly what you need in both cases. I will do my best,,, try,, to get those pulled off and some pics for you tonight. Thanks, Fred.

[57taskforce]

Originally Posted by specialtyretail

I think I know exactly what you need in both cases. I will do my best,,, try,, to get those pulled off and some pics for you tonight. Thanks, Fred.

Thank you very much.

[specialtyretail]

Originally Posted by 57taskforce

Sorry should have been more specific. I've got the lower plate and rubber that screw to the fire wall and I've got the upper rubber that goes in the dash but I don't have what ever holds the column to the dash if that makes sense.i believe i need the u-bracket and the bolts holding it on. When I got the truck the column was in the seat, with the parts I described so I'm not too sure what I'm missing.

Also for the pedal assembly, all I've got is the bracket bolted to the fire wall and dash with the pedal and linkage removed. (Booster and mc are still bolted to the firewall) If there's any way I could just get those parts that would be good, however I do understand if your wanting to sell as an assembly.

Shipping to 87455

SOLD,,,, THANKS.... OK, lets look and see if this is what you have in mind. The plate and u bracket for the column and the brake pedal bracket assembly. Look like what you had in mind?? $50.00 shipped if you need it for all of it. Thanks, Fred.

[57taskforce]

Originally Posted by specialtyretail

OK, lets look and see if this is what you have in mind. The plate and u bracket for the column and the brake pedal bracket assembly. Look like what you had in mind?? $50.00 shipped if you need it for all of it. Thanks, Fred.

Looks great! Just what I had in mind! the one question I have is about the linkage between the brake booster and the brake pedal. Is that part of the pedal assembly or the booster assembly?

[specialtyretail]

PARTS SOLD LOCALLY SO FAR.... Hood hinges.. Power steering pump & brackets.. Alterntor and brackets.. All pulleys.. Thanks, Fred.

[BLT gmc]

Would you price the complete lighter with wiring to fuse box shipped to 51555. Also pictures or condition of the lighter/wiring. Thank you, Bruce

[specialtyretail]

Originally Posted by BLT gmc

Would you price the complete lighter with wiring to fuse box shipped to 51555. Also pictures or condition of the lighter/wiring. Thank you, Bruce

Hey Bruce. Let me check on that Monday evening for you. Thanks, Fred.

[mikewoods]

Hi Fred,

I was looking for the round headlight trim that attach the headlights to the bucket.

I'll pass on the turn signal pigtails for now, I think I have a line on a set locally.

Do you also have tail light bezels?

Thanks again.

[Undone]

Windshield and rear window stainless condition and shipped price to 30530.

[mikewoods]

Originally Posted by mikewoods

Hi Fred,

I was looking for the round headlight trim that attach the headlights to the bucket.

I'll pass on the turn signal pigtails for now, I think I have a line on a set locally.

Do you also have tail light bezels?

Thanks again.

Hi Fred,

I hope I didn't miss it, did you reply to this?

Thanks!

[specialtyretail]

Originally Posted by mikewoods

Hi Fred,

I hope I didn't miss it, did you reply to this?

Thanks!

Hey Mike. Let me see if I can get those rings off without destroying them, the screws are pretty rusty. No tail light bezels. Thanks, Fred.

[jabborabbo]

Gauge bezel and seat belts...are they fawn (medium fawn bezel and light fawn seat belts, that is)? If so I'm interested - shipped to 75801....

[JimH2828]

Fred, here a list of some engine compartment items.

1) Carb, what number is it?
2) Carb to distributor vacuum hard line and manifold mount clip
3) Fuel pump to carb hard line, any good?
4) Carb air cleaner stud and wing nut, original?
5) Does the thermostat housing have the throttle spring tang?
6) Throttle to gas pedal actuator with end bolt
7) Are either, top of engine, plug wire retainer brackets there?
8) Driver inner fender clip that hold e-brake cable.

I'll try and think of other stuff.

Thanks
Jim

[specialtyretail]

Originally Posted by JimH2828

Fred, here a list of some engine compartment items.

1) Carb, what number is it?
2) Carb to distributor vacuum hard line and manifold mount clip
3) Fuel pump to carb hard line, any good?
4) Carb air cleaner stud and wing nut, original?
5) Does the thermostat housing have the throttle spring tang?
6) Throttle to gas pedal actuator with end bolt
7) Are either, top of engine, plug wire retainer brackets there?
8) Driver inner fender clip that hold e-brake cable.

I'll try and think of other stuff.

Thanks
Jim

Hey Jim. Quite a list,, I like it, all in the same area. I will check when I get back to the shop this evening. Thanks, Fred.

[jamyers]

How about the speedometer, shipped to 79508?

Does it have a tach?

[specialtyretail]

Originally Posted by JimH2828

Fred, here a list of some engine compartment items.

1) Carb, what number is it?
2) Carb to distributor vacuum hard line and manifold mount clip
3) Fuel pump to carb hard line, any good?
4) Carb air cleaner stud and wing nut, original?
5) Does the thermostat housing have the throttle spring tang?
6) Throttle to gas pedal actuator with end bolt
7) Are either, top of engine, plug wire retainer brackets there?
8) Driver inner fender clip that hold e-brake cable.

I'll try and think of other stuff.

Thanks
Jim

Hey Jim. I should have your carb pics and numbers Thursday evening if that will work for you. Work & real life have been hectic this week. Thanks, Fred.

[Alabama GMC]

Will the upper fender trim fit my 72 need the drivers side

[NotMyMojo]

I'm looking for:

-fresh air door and hardware on the driver's side kick panel (only if the bottom tab isn't broken)
-parking brake release handle (if in good condition)
-steering column cover and screws (Item 19 on this page)
-headlight switch, bezel, and knob
-Wiper bezel and knob

Please give a price shipped for all to 30017. Thanks!

[NotMyMojo]

Also forgot to add:

-Ignition switch bezel assembly

[specialtyretail]

Hey guys. Just got in from work, had a few life scenarios to deal with this evening. it is nothing serious but it did keep me from getting any parts/pics on the truck. I do apologize, I should be able to hit it hard and heavt Tuesday evening. Again, sorry for the delay,, you all know how things go sometimes. Thanks, Fred.

[GeoNOregon]

Hi Fred,

Hope all is well or working itself out.

I just bought a 68 C20 pickup as a material hauler. It's not a restoration project, by any means, but it does need a few things to be a better rig to drive. Here's what I could use, if you have them.

Cosmetic condition is not that critical to me, unless rust or corrosion is so bad it would impact function.

Driver's side door handle, (mine's missing the thumb button, I assume it's new handle time and can't be fixed with a button.)

Manual pitman arm or power steering gear box and pump for 6 cyl

window handle(s)

good window regulators both sides

decent window channel both sides

accel pedal, (mine's missing, so a half way worn out one would be better)

brake and clutch pads, (clutch is missing, so a half way worn out one would be better. will only replace the brake if I can find one not 3/4's worn out!)

No great hurry. The only thing of any urgency is fixing the pitman. It also has some leaky wheel cylinders, so with all of them combined, it pulls right, then left, and dives in the same direction at the same time from the bad shocks,then repeats the swerving cause of the loose pitman; stopping is a bit like a carnival ride.

Add in the manual brakes, and you're wondering if the ride is actually gonna stop at the end of the ride! yee haw... (I havn't found the guts to drive it on a highway, yet. Just on surface streets, to and from Home Depot for materials.)

GeoD

Thanks,

GeoD

Let me know f you got any of this stuff and how much you want for it and I'll get you some $$.

ignition switch bezel

Right side heater duct in dash

glove box, (missing mine, so decent better than nothing

rear shocks, (you should this baby bounce!)

working radio that'll fit the holes, (doesn't have to be factory, just a fitter.)