Brave or crazy? crewcab build - Page 27 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bodydropped68 · 06-30-2014, 09:25 AM

Quote:

Originally Posted by oilyrag80

looks like I will have to tighten up the door gap a little since I set the other side up at 1/8 and this side looks more like 3/16

Hell yeah looking good

jbclassix · 06-30-2014, 10:36 AM

looks really good!

oilyrag80 · 07-01-2014, 11:05 PM

Quote:

Originally Posted by VA72C10

That cab corner does look like it fit well. Looking good overall!

yes it fit very well will use them again

Quote:

Originally Posted by 79azc10

Looks good bro, wish I could have stopped by today but the wife is sick and i got kid duty

no problem, anytime is fine just give me a call

Quote:

Originally Posted by Xeen

The cab corner looks like it fit in the realm of perfect and we can't ask better than that.

yea it is the best one i've used

Quote:

Originally Posted by bodydropped68

Hell yeah looking good

Quote:

Originally Posted by jbclassix

looks really good!

Thanks guys

oilyrag80 · 07-01-2014, 11:09 PM

I put the bed on to get a look at it with the cab corner.

oilyrag80 · 07-01-2014, 11:21 PM

I also ran into another snag, apparently my cab has been sitting on the trailing arm crossmember. Not sure exactly how i'm going to fix it yet but I have a few ideas.

**Dieselwrencher** · 07-01-2014, 11:28 PM

Great work! Looking at your thread is always a bad deal for me as I want to build one so bad......

Xeen · 07-02-2014, 12:02 AM

Quote:

Originally Posted by oilyrag80

I also ran into another snag, apparently my cab has been sitting on the trailing arm crossmember. Not sure exactly how i'm going to fix it yet but I have a few ideas.

It's not supposed to do that, I'm guessing you bought a cab/bed mounting kit, well did you have any washers left over?
If not you may have too many washers on the wrong side of the frame mounts.

oilyrag80 · 07-02-2014, 12:39 AM

Quote:

Originally Posted by Xeen

It's not supposed to do that, I'm guessing you bought a cab/bed mounting kit, well did you have any washers left over?
If not you may have too many washers on the wrong side of the frame mounts.

Well it happened because the rear portion of my floor is stock suburban and in the suburban the trailing arm crossmember is farther forward then it is now. I added like 20 some inches to the wheel base so there is no clearance in this area of the floor to clear the crossmember. It is not a big deal I knew it was close, just need to decide how I want to fix it. This is one of the things I would have done different if I started this project today I would of used the truck cab floor in the rear and I wouldn't of ran into this problem. I am also going to have to fab all seat mounting points as well because of this.

Xeen · 07-02-2014, 01:04 AM

Oh geeze yeah I somehow convienantly forgot you merged a suburban and a c10 haha can I delete that post and we can pretend it never happened?

<---

mcbassin · 07-02-2014, 08:25 AM

Quote:

Originally Posted by oilyrag80

I put the bed on to get a look at it with the cab corner.

Looks great! I'm sure you can fix that little interference problem pretty easy. Just a matter of making a cover plate and welding it in.

oilyrag80 · 07-03-2014, 12:52 AM

Quote:

Originally Posted by Xeen

Oh geeze yeah I somehow convienantly forgot you merged a suburban and a c10 haha can I delete that post and we can pretend it never happened?

<---

Yea it's my fault I should have explained it a little better before I posted pics.

Quote:

Originally Posted by mcbassin

Looks great! I'm sure you can fix that little interference problem pretty easy. Just a matter of making a cover plate and welding it in.

It shouldn't be a big deal I think I may cut out the orginal one and move it back then use a flat peice to replace that hole. In the pic you can see the orginal one and where I need to move it.

bodydropped68 · 07-03-2014, 09:21 AM

That should work

oilyrag80 · 07-08-2014, 09:52 PM

got a little done over the weekend I cut out the hump for the crossmember and welded in a flat piece got in tacked in.

mcbassin · 07-09-2014, 08:17 AM

Quote:

Originally Posted by oilyrag80

got a little done over the weekend I cut out the hump for the crossmember and welded in a flat piece got in tacked in.

Looks good. Nice progress.

bodydropped68 · 07-09-2014, 09:37 AM

nice

oilyrag80 · 07-10-2014, 10:23 PM

all finished up

**Dieselwrencher** · 07-10-2014, 10:54 PM

Very nice!

79azc10 · 07-10-2014, 11:05 PM

Good work

oilyrag80 · 07-16-2014, 10:10 PM

Quote:

Originally Posted by Dieselwrencher

Very nice!

Quote:

Originally Posted by 79azc10

Good work

Thanks guys,I have made some more progress will post pics soon!

oilyrag80 · 07-18-2014, 10:48 PM

I made mounts for the rear seat. I made some plates with nuts welded to them then welded them on the botom side of the floor. then I cut some 14ga
out for the top to help distribute the weight from the seat. I also made the other speaker mount and seam sealed everthing. Only thing left for the rear is the seatbelt mounts.

BigDaddyV · 07-19-2014, 08:50 AM

Man you are killin this thing! I love it. Need more!

**Palf70Step** · 07-19-2014, 09:41 AM

I always forget about floor bolts until I am installing stuff. Again, your are doing great work with this conversion.

oilyrag80 · 07-19-2014, 09:11 PM

working on door gap today the I set the driver side up at 1/8 gap so I had to make the passenger side match it was like 3/16. the first pic is the driver side rear door second is what the passenger side looked like before I started

oilyrag80 · 07-19-2014, 09:17 PM

I used the old welding wire trick to build up the gap

oilyrag80 · 07-19-2014, 09:56 PM

here it is almost done just a little fine tuning with a straight file and it will match the other side. 2nd pic is of the door edge

06-30-2014, 10:36 AM	#652
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Brave or crazy? crewcab build looks really good! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

07-01-2014, 11:09 PM	#654
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: Brave or crazy? crewcab build I put the bed on to get a look at it with the cab corner. Attached Images __________________ check out my crew cab build http://67-72chevytrucks.com/vboard/s...d.php?t=557019

07-01-2014, 11:21 PM	#655
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: Brave or crazy? crewcab build I also ran into another snag, apparently my cab has been sitting on the trailing arm crossmember. Not sure exactly how i'm going to fix it yet but I have a few ideas. Attached Images __________________ check out my crew cab build http://67-72chevytrucks.com/vboard/s...d.php?t=557019

07-01-2014, 11:28 PM	#656
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,135	Re: Brave or crazy? crewcab build Great work! Looking at your thread is always a bad deal for me as I want to build one so bad...... __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-02-2014, 01:04 AM	#659
Xeen Registered User Join Date: Aug 2012 Location: Topeka Kansas Posts: 2,655	Re: Brave or crazy? crewcab build Oh geeze yeah I somehow convienantly forgot you merged a suburban and a c10 haha can I delete that post and we can pretend it never happened? <--- __________________ Please call me Brian. Check out My 1972 SWB Fleetside 5.3L Vortec Restomod Build Last edited by Xeen; 07-02-2014 at 01:21 AM.

07-03-2014, 09:21 AM	#662
bodydropped68 Registered User Join Date: Jun 2006 Location: Tucson, Az Posts: 705	Re: Brave or crazy? crewcab build That should work

07-08-2014, 09:52 PM	#663
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: Brave or crazy? crewcab build got a little done over the weekend I cut out the hump for the crossmember and welded in a flat piece got in tacked in. Attached Images __________________ check out my crew cab build http://67-72chevytrucks.com/vboard/s...d.php?t=557019

07-09-2014, 09:37 AM	#665
bodydropped68 Registered User Join Date: Jun 2006 Location: Tucson, Az Posts: 705	Re: Brave or crazy? crewcab build nice

07-10-2014, 10:23 PM	#666
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: Brave or crazy? crewcab build all finished up Attached Images __________________ check out my crew cab build http://67-72chevytrucks.com/vboard/s...d.php?t=557019

07-10-2014, 10:54 PM	#667
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,135	Re: Brave or crazy? crewcab build Very nice! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-10-2014, 11:05 PM	#668
79azc10 Registered User Join Date: Jan 2014 Location: Tucson az Posts: 171	Re: Brave or crazy? crewcab build Good work

07-18-2014, 10:48 PM	#670
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: Brave or crazy? crewcab build I made mounts for the rear seat. I made some plates with nuts welded to them then welded them on the botom side of the floor. then I cut some 14ga out for the top to help distribute the weight from the seat. I also made the other speaker mount and seam sealed everthing. Only thing left for the rear is the seatbelt mounts. Attached Images __________________ check out my crew cab build http://67-72chevytrucks.com/vboard/s...d.php?t=557019

07-19-2014, 08:50 AM	#671
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: Brave or crazy? crewcab build Man you are killin this thing! I love it. Need more! __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

07-19-2014, 09:41 AM	#672
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,644	Re: Brave or crazy? crewcab build I always forget about floor bolts until I am installing stuff. Again, your are doing great work with this conversion. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-19-2014, 09:11 PM	#673
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: Brave or crazy? crewcab build working on door gap today the I set the driver side up at 1/8 gap so I had to make the passenger side match it was like 3/16. the first pic is the driver side rear door second is what the passenger side looked like before I started Attached Images __________________ check out my crew cab build http://67-72chevytrucks.com/vboard/s...d.php?t=557019



Register or Log In To remove these advertisements.

07-19-2014, 09:17 PM	#674
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: Brave or crazy? crewcab build I used the old welding wire trick to build up the gap Attached Images __________________ check out my crew cab build http://67-72chevytrucks.com/vboard/s...d.php?t=557019

07-19-2014, 09:56 PM	#675
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: Brave or crazy? crewcab build here it is almost done just a little fine tuning with a straight file and it will match the other side. 2nd pic is of the door edge Attached Images __________________ check out my crew cab build http://67-72chevytrucks.com/vboard/s...d.php?t=557019

Register or Log In To remove these advertisements.