|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-16-2013, 11:04 PM
|
#1 |
|
Registered User
Join Date: May 2011
Location: south mississippi
Posts: 177
|
quick ls1 swap questions
85 c10 was a 305 truck...... Plans are to put a 5.3 with the edelbrock carb kit...... Will I have to have AC compressor swapped and relocated and radiator....I was hoping this wouls be a quick and easy swap
|
|
|
|
10-16-2013, 11:06 PM
|
#2 |
|
Registered User
Join Date: May 2011
Location: south mississippi
Posts: 177
|
Re: quick ls1 swap questions
Also assume I will need motor mount relocation mounts
|
|
|
|
|
10-17-2013, 08:47 AM
|
#3 |
|
Registered User
Join Date: Apr 2012
Location: Covington, GA
Posts: 386
|
Re: quick ls1 swap questions
It's a bit more complicated than swapping one Gen 1 SBC for another. To answer your questions:
1. Keeping the A/C compressor in the stock location is a bit of a pain; you'd have to move the engine stands backward, and probably notch the frame to get clearance for the A/C lines. 2. You can probably get the radiator working fine. I'm using the stock radiator on my '72. 3. Yep, you'll need adapter plates. I made mine out of a piece of 1/4" plate ordered from McMaster.
__________________
Matt Cramer 1972 Chevy C10 - 4.8 swap, long bed, and maybe one dent free body panel somewhere - SOLD 4.8 LS build thread |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
