TX WTB Big Block LWP AC brackets Driver side & AC lines Axial - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 12-07-2015, 07:39 AM

I recently swapped a 73 454 big block out of a 73 C20 into my 79 Malibu. For simplicity's same I kept the long water pump, pulley and brackets. The truck/ engine originally had AC but it had been removed before I bought it. I am thinking of using the original brackets and hoses. From my experience all of the fitting on older GM vehicles were the same. I plan on running one of the newer r134 compatible axial compressors.

I will need all of the AC brackets (and bolts if possible) and a good set of hoses that run from the compressor an to the evaporator and condensor. Compressor not needed.

Price shipped to Cedar Park Tx 78613 (NW of Austin)

12-07-2015, 07:39 AM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	WTB Big Block LWP AC brackets Driver side & AC lines Axial I recently swapped a 73 454 big block out of a 73 C20 into my 79 Malibu. For simplicity's same I kept the long water pump, pulley and brackets. The truck/ engine originally had AC but it had been removed before I bought it. I am thinking of using the original brackets and hoses. From my experience all of the fitting on older GM vehicles were the same. I plan on running one of the newer r134 compatible axial compressors. I will need all of the AC brackets (and bolts if possible) and a good set of hoses that run from the compressor an to the evaporator and condensor. Compressor not needed. Price shipped to Cedar Park Tx 78613 (NW of Austin)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.