|
06-13-2002, 11:07 PM
|
#1 |
|
Registered User
Join Date: Jan 2001
Location: OliveBranch, MS
Posts: 154
|
Window Rattle
What does it take to get rid of the window rattle? Is there a kit to replace all the guides or something?
__________________
69 Chevy ProStreet, Low and wild. 78 Corvette rturnpaugh@compcams.com |
|
|
|
06-13-2002, 11:36 PM
|
#2 |
|
Back in the sticks
Join Date: Jan 2001
Location: Fordland, MO
Posts: 3,188
|
Replacing the inner and outer bell weather strips usually takes care of the rattle. If not then new window channel front and back will. GMC Paul or any of the other vendors sell the kits and individual pieces. Jeff.
__________________
1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty |
|
|
|
|
06-13-2002, 11:40 PM
|
#3 |
|
Registered User
Join Date: Jan 2001
Location: OliveBranch, MS
Posts: 154
|
It only rattles when it's down. There's alot of movement in there. I guess i'll look at GMC Paul's site. I've ordered from him before was very happy with the service.
Thanks,
__________________
69 Chevy ProStreet, Low and wild. 78 Corvette rturnpaugh@compcams.com |
|
|
|
|
06-13-2002, 11:46 PM
|
#4 |
|
Registered User
Join Date: Jan 2001
Location: OliveBranch, MS
Posts: 154
|
It only rattles when it's down. There's alot of movement in there. I guess i'll look at GMC Paul's site. I've ordered from him before was very happy with the service.
Thanks,
__________________
69 Chevy ProStreet, Low and wild. 78 Corvette rturnpaugh@compcams.com |
|
|
|
|
06-14-2002, 12:37 AM
|
#5 |
|
Senior Member
 
Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,745
|
window rattles
You need the super kit that takes care of all the weatherstripping in both doors and will put you back good as new.Check out KINGPARTS.COM they have great prices on there product,and tell them your from the board,hope this helps
__________________
Things happen for a reason! |
|
|
|
|
06-14-2002, 07:14 AM
|
#6 |
|
CCRider
Join Date: Feb 2000
Location: Olive Branch,MS,USA
Posts: 2,232
|
I know I am going to hear it on this one, but here goes. Every one of these trucks I have owned rattled when the window was down except one, a 72. For some reason GM put a screw in the door, in 72 only, right where the rattle was coming from. Coincidence?
__________________
72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS |
|
|
|
|
06-14-2002, 07:57 AM
|
#7 |
|
Registered User
Join Date: Dec 1999
Location: BRADENTON FLA
Posts: 3,269
|
After you put the new division bar,channel and inner-outer glass seals in if they still rattle pull your vent window out and weld the metal strap that holds the inner-outer door together. If there is a crack or break at the top of the door by the vent window running down you need to pull the door,dissamble it and weld a strap accross it inside to prevent more metal fatigue. Just welding the break will not work it needs a backing plate welded inside to stop the vibration that will in time fatigue and break the metal around the top door hinge. When we repair them here we take a 4" long x 2" tall piece from the top rear of a donor door and weld it into the cracked door then weld a 12" long x 6" tall backing plate in to prevent any more vibration fatigue. Don't forget the clip slot needs to line up with the inner-outer clips. (spelling?)
__________________
Rest in Peace Ed. Thanks for all the good times. |
|
|
|
|
06-14-2002, 08:48 AM
|
#8 |
|
Registered User
Join Date: Jan 2001
Location: OliveBranch, MS
Posts: 154
|
Thanks for the info. I need to replace the weather seals anyway, so I will shop around for the kit.
__________________
69 Chevy ProStreet, Low and wild. 78 Corvette rturnpaugh@compcams.com |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
