CA 79 Chevy Bonanza 20 2wd being parted* - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 12-03-2009, 05:55 PM

This truck has a 350 that runs but smokes really bad and a th350 that drives but slips really bad. The body is beat and the interior is thrashed. It is an AC truck but I don't see a lot of usable parts.
tilt column $75 plus shipping
350 engine $50 local
th350 tranny $25 local
cargo light $30 shipped
If you see any parts you want please ask in thread. The back end of the truck is sold local for a bed trailer. Thanks, Ray

jchav62 · 12-03-2009, 06:12 PM

What shape are the A/C Heater controls in?

KrazyRay · 12-03-2009, 08:52 PM

Quote:

Originally Posted by jchav62

What shape are the A/C Heater controls in?

They look to be in good condition. $25 shipped. Thanks, Ray

**71blksuper4x4** · 12-03-2009, 09:04 PM

Can I get a better picture of the cruise control under the hood? Thanks Trevor

KrazyRay · 12-04-2009, 12:42 PM

Quote:

Originally Posted by 71blksuper4x4

Can I get a better picture of the cruise control under the hood? Thanks Trevor

pics of CC

osaltyone · 12-04-2009, 12:46 PM

What kind of shape is the dashpad and door panels in? Can you get pics?

KrazyRay · 12-04-2009, 12:51 PM

Quote:

Originally Posted by osaltyone

What kind of shape is the dashpad and door panels in? Can you get pics?

They're junk!

xrcr · 12-04-2009, 02:25 PM

I need an auto. trans. crossmember. Switching from a 4 speed to 770r in a 76 Custom deluxe 20. shipped to MO

KrazyRay · 12-04-2009, 03:56 PM

Quote:

Originally Posted by xrcr

I need an auto. trans. crossmember. Switching from a 4 speed to 770r in a 76 Custom deluxe 20. shipped to MO

I can do $45 shipped for the auto crossmember in this truck. Thanks, Ray

Oilbrnr · 12-04-2009, 04:15 PM

Does the turn signal stalk go with or without the column?

KrazyRay · 12-04-2009, 05:08 PM

Quote:

Originally Posted by Oilbrnr

Does the turn signal stalk go with or without the column?

It is included with the column.

**71blksuper4x4** · 12-04-2009, 10:32 PM

how much would you ask for the cruise transducer w/bracket and cables? Thanks Trevor

KrazyRay · 12-05-2009, 12:45 AM

Quote:

Originally Posted by 71blksuper4x4

how much would you ask for the cruise transducer w/bracket and cables? Thanks Trevor

I can do $35 shipped. Thanks, Ray

Scootin 81 C20 · 12-05-2009, 01:04 AM

Ray, what kind of shape is the clear piece over the gauges in?

79gmcc15 · 12-05-2009, 05:10 AM

How is the Headlight bezels,carpet? Does it have a delay wiper controls? And does the wiper motor spray and wipe? Thanks

KQQL IT · 12-05-2009, 04:01 PM

5 star guy too..

J_PEPIN87 · 12-05-2009, 04:05 PM

How much for dash bezel and can you get like a front view pic?thank you!

Conundrum · 12-05-2009, 04:08 PM

My dad would be interested in the passenger headlight bezel if it isn't already sold.
How much shipped to 67357?

KrazyRay · 12-06-2009, 12:05 AM

Scootin 81 C20- The plastic looks good $20 shipped
79gmcc15- Headlight bezels, carpet, and washer are junk. It has the wiper controls with delay minus small knob that went to Scootin 81 C20 $10 shipped
KQQL IT thanks
J PEPIN87- Dash bezel good except small cuts at radio $25 shipped
Conundrum-sorry
I have another 79 coming in next week...maybe it will have some of these parts
Thanks, Ray

KrazyRay · 12-06-2009, 12:11 AM

auto cross member, door panels

Scootin 81 C20 · 12-06-2009, 01:04 AM

Thanks, but I noticed it has a clock knob hole in it so I think I'll pass. If you get one that doesn't have any holes in it and isn't yellowed as bad as mine, let me know.

79gmcc15 · 12-06-2009, 01:23 AM

Thanks! I'll pass for now. I'll wait to see if you get another one. thanks

xrcr · 12-06-2009, 09:20 AM

Thanks Ray on the crossmember. The one I need goes between the framerails on both sides. I'll send a picture tomorrow if I can

**71blksuper4x4** · 12-07-2009, 11:11 PM

Ray, I'll pass on the cruise, as I have just found my other one I forgot I had. How much for the dash clock and associated wiring for it??? Thanks Trevor

xrcr · 12-09-2009, 10:01 AM

Ray,
This is the crossmember Out of the 76-3/4 with a 4 spd. I have no idea what the auto should look like, but I was hoping like this. I've got it cut down and welded up so this would work, but OEM would be good too. Hopefully the picture is attached.

12-03-2009, 05:55 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	79 Chevy Bonanza 20 2wd being parted* This truck has a 350 that runs but smokes really bad and a th350 that drives but slips really bad. The body is beat and the interior is thrashed. It is an AC truck but I don't see a lot of usable parts. tilt column $75 plus shipping 350 engine $50 local th350 tranny $25 local cargo light $30 shipped If you see any parts you want please ask in thread. The back end of the truck is sold local for a bed trailer. Thanks, Ray Attached Images

12-03-2009, 06:12 PM	#2
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: 79 Chevy Bonanza 20 2wd being parted What shape are the A/C Heater controls in? __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

12-03-2009, 09:04 PM	#4
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,150	Re: 79 Chevy Bonanza 20 2wd being parted Can I get a better picture of the cruise control under the hood? Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

12-04-2009, 12:46 PM	#6
osaltyone Registered User Join Date: Jun 2009 Location: Corona, ca Posts: 406	Re: 79 Chevy Bonanza 20 2wd being parted What kind of shape is the dashpad and door panels in? Can you get pics?

12-04-2009, 02:25 PM	#8
xrcr Registered User Join Date: Dec 2008 Location: Foristell, MO Posts: 418	Re: 79 Chevy Bonanza 20 2wd being parted I need an auto. trans. crossmember. Switching from a 4 speed to 770r in a 76 Custom deluxe 20. shipped to MO

12-04-2009, 04:15 PM	#10
Oilbrnr Registered User Join Date: Feb 2009 Location: Scottsdale, AZ Posts: 390	Re: 79 Chevy Bonanza 20 2wd being parted Does the turn signal stalk go with or without the column? __________________ -Don- '66 C10 w/factory A/C '77 Cheyenne K5 350/465/205 '80 Custom Deluxe K20 350/465/205 '04 Denali XL '05 DMax CCLB 4x Have a Hickey Sidewinder Winch and need the owners/install manual? Send me a PM with your email address and I'll forward you a .pdf

12-04-2009, 10:32 PM	#12
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,150	Re: 79 Chevy Bonanza 20 2wd being parted how much would you ask for the cruise transducer w/bracket and cables? Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

12-05-2009, 01:04 AM	#14
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: 79 Chevy Bonanza 20 2wd being parted Ray, what kind of shape is the clear piece over the gauges in? __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

12-05-2009, 05:10 AM	#15
79gmcc15 Gettin It One Pice At A Time Join Date: Oct 2004 Location: everett, washington Posts: 2,688	Re: 79 Chevy Bonanza 20 2wd being parted How is the Headlight bezels,carpet? Does it have a delay wiper controls? And does the wiper motor spray and wipe? Thanks __________________ RIP ELJAY Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby Last edited by 79gmcc15; 12-05-2009 at 10:13 PM. Reason: dang cell phone Lol.

12-05-2009, 04:01 PM	#16
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,142	Re: 79 Chevy Bonanza 20 2wd being parted 5 star guy too.. __________________ " That didnt make it any newer " " Dont antique the equipment "

12-05-2009, 04:05 PM	#17
J_PEPIN87 Registered User Join Date: Sep 2008 Location: PASADENA,TX Posts: 206	Re: 79 Chevy Bonanza 20 2wd being parted How much for dash bezel and can you get like a front view pic?thank you!

12-05-2009, 04:08 PM	#18
Conundrum Registered User Join Date: Oct 2008 Location: Parsons, KS Posts: 652	Re: 79 Chevy Bonanza 20 2wd being parted My dad would be interested in the passenger headlight bezel if it isn't already sold. How much shipped to 67357? __________________ 74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r http://67-72chevytrucks.com/vboard/s...d.php?t=460030 97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver 220,000 miles, all stock for now

12-06-2009, 12:05 AM	#19
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 79 Chevy Bonanza 20 2wd being parted Scootin 81 C20- The plastic looks good $20 shipped 79gmcc15- Headlight bezels, carpet, and washer are junk. It has the wiper controls with delay minus small knob that went to Scootin 81 C20 $10 shipped KQQL IT thanks J PEPIN87- Dash bezel good except small cuts at radio $25 shipped Conundrum-sorry I have another 79 coming in next week...maybe it will have some of these parts Thanks, Ray Attached Images

12-06-2009, 12:11 AM	#20
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 79 Chevy Bonanza 20 2wd being parted auto cross member, door panels Attached Images

12-06-2009, 01:04 AM	#21
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: 79 Chevy Bonanza 20 2wd being parted Thanks, but I noticed it has a clock knob hole in it so I think I'll pass. If you get one that doesn't have any holes in it and isn't yellowed as bad as mine, let me know. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.



Register or Log In To remove these advertisements.

12-06-2009, 01:23 AM	#22
79gmcc15 Gettin It One Pice At A Time Join Date: Oct 2004 Location: everett, washington Posts: 2,688	Re: 79 Chevy Bonanza 20 2wd being parted Thanks! I'll pass for now. I'll wait to see if you get another one. thanks __________________ RIP ELJAY Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby

12-06-2009, 09:20 AM	#23
xrcr Registered User Join Date: Dec 2008 Location: Foristell, MO Posts: 418	Re: 79 Chevy Bonanza 20 2wd being parted Thanks Ray on the crossmember. The one I need goes between the framerails on both sides. I'll send a picture tomorrow if I can

12-07-2009, 11:11 PM	#24
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,150	Re: 79 Chevy Bonanza 20 2wd being parted Ray, I'll pass on the cruise, as I have just found my other one I forgot I had. How much for the dash clock and associated wiring for it??? Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

12-09-2009, 10:01 AM	#25
xrcr Registered User Join Date: Dec 2008 Location: Foristell, MO Posts: 418	Re: 79 Chevy Bonanza 20 2wd being parted Ray, This is the crossmember Out of the 76-3/4 with a 4 spd. I have no idea what the auto should look like, but I was hoping like this. I've got it cut down and welded up so this would work, but OEM would be good too. Hopefully the picture is attached. Attached Images

Register or Log In To remove these advertisements.