WA parting 72 suburban - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ackattack · 06-21-2010, 12:20 AM

Quote:

Originally Posted by red71cheyenne

I'll take the grill, can you put it aside for me? I can get it next week sometime. Jeff.

OK, sounds good

Ackattack · 06-21-2010, 12:21 AM

Quote:

Originally Posted by 1956cameo

I am not sure if you are reffering to the aftermarket looking seat belts in the 7th picture; but I am only interested in the three factory male and three factory female seat belts with all hardware and rubber boots in the 6th picture from the top. Just let me know what those would be when you get a chance. My zip is 77584 if you want to give me a shipped price. Thanks!

$30 + $10 shipping

Ackattack · 06-21-2010, 12:26 AM

Quote:

Originally Posted by dougo

I'm looking for the end cap (1 cap, for one side) for a headliner bow - I can take a pic to show you what's missing... if that would help.

headliner bows and cap are spoken for, I'll let you know if it happens to fall throgh.

Ackattack · 06-21-2010, 12:27 AM

Quote:

Originally Posted by Se7en Deuce

I may need the front doors if they work on a 72 truck also
do they have the screws on the inside door panel?

pm me if they are still available and in good shape

The front doors are different. The suburban doors are squared at the top, and the truck doors are rounded.

ralphie628 · 06-21-2010, 03:49 AM

how much are you asking for the tilt?

Ackattack · 06-21-2010, 09:35 AM

Quote:

Originally Posted by ralphie628

how much are you asking for the tilt?

$250 + shipping

1956cameo · 06-28-2010, 07:49 AM

Thanks for putting up the price. Sorry for the late reply. I think I will pass for now. Not because of the price but because I need a complete set of blazer belts and I don't know how much of your belts I can use. If I don't get a set soon and you still have these then I will get them from you.

bullington · 07-25-2010, 02:24 AM

Is the tilt still available?

portugee14 · 07-29-2010, 06:56 PM

grill still available

bangingears · 07-30-2010, 07:42 AM

can u send pic of rear hatch?

Ackattack · 08-05-2010, 03:05 PM

Quote:

Originally Posted by portugee14

grill still available

grill is gone

18436572 · 08-11-2010, 10:54 PM

How much $ for the third door ??

ConnDemned · 08-12-2010, 12:46 AM

Does it have the sport style back bumper? Looking for the brackets if so.

Tow Me · 08-19-2010, 11:32 AM

Is the "chrome/stainless trim for side panels" you listed the pieces below the windows? If so whats the condition and how much?

swmnboy · 08-19-2010, 08:42 PM

How much for the lift gate? Do you have pictures?

71suburban/70CST · 09-17-2010, 12:50 AM

I am looking for the lower rear pannel below the tail gate. Do you have a decent one and if so how much? Thanks,
Justin

68C10HotRod · 09-24-2010, 01:54 AM

What condition are the rear cargo interior panels - pics? Are door panels still available? Best price on all panels shipped to 68134? Have you sold the front tub? I might be interested in some of the floor if available. Also rear sill between taillights - pics?

Ackattack · 09-25-2010, 01:08 PM

sorry guys, I haven't looked at my ad for ahwhile

I'll get some extra pictures and prices shortly

Ackattack · 09-25-2010, 01:18 PM

Quote:

Originally Posted by 18436572

How much $ for the third door ??

$150

Quote:

Originally Posted by ConnDemned

Does it have the sport style back bumper? Looking for the brackets if so.

I've decided to keep the rear bumper

Quote:

Originally Posted by Tow Me

Is the "chrome/stainless trim for side panels" you listed the pieces below the windows? If so whats the condition and how much?

Yeah, below the window on the interior that keeps the side interior panels in place. $100?

Quote:

Originally Posted by swmnboy

How much for the lift gate? Do you have pictures?

$200

Quote:

Originally Posted by 68C10HotRod

What condition are the rear cargo interior panels - pics? Are door panels still available? Best price on all panels shipped to 68134? Have you sold the front tub? I might be interested in some of the floor if available. Also rear sill between taillights - pics?

The interior panels are a little soft (cardboard type backing)

I still have the door panels too

how about $300 shipped for all the interior panels (4 doors and rear cargo sides....I'll get pictures of the rear side panels

I still have the whole body, but would rather sell the whole thing before I start cutting it up.

I'll also get a picture of the area between the tail lights.

Ackattack · 09-25-2010, 01:29 PM

tilt column is also still available $250

Infanti · 09-26-2010, 11:18 AM

What shape is the body in,and how much?
Gerry

Ackattack · 09-26-2010, 11:44 AM

Quote:

Originally Posted by Infanti

What shape is the body in,and how much?
Gerry

it has some rust from the lower trim down. On the inside it looks like the standard rust on the floor boards/kick panels.

I'd do $300 for the shell (rear glass, windshield, 4th door glass is all good) doors would be extra. I have a title for it too.

This picture will give you a little bit of an idea

budnikguy · 09-28-2010, 05:08 PM

So, this is a 3/4 ton or 1/2 ton? Looks like 1/2 ton...if so interested, lmk then I will PM you.

Adam

Quote:

Originally Posted by Ackattack

it has some rust from the lower trim down. On the inside it looks like the standard rust on the floor boards/kick panels.

I'd do $300 for the shell (rear glass, windshield, 4th door glass is all good) doors would be extra. I have a title for it too.

This picture will give you a little bit of an idea

Ackattack · 09-28-2010, 05:12 PM

Quote:

Originally Posted by budnikguy

So, this is a 3/4 ton or 1/2 ton? Looks like 1/2 ton...if so interested, lmk then I will PM you.

Adam

Originally it was a 3/4, and was converted to half ton. However, I got it for the 1/2 ton suspension, so it won't will have a 8 lug drum front and probably nothing for the back

budnikguy · 09-28-2010, 05:26 PM

PM'd ya

06-21-2010, 03:49 AM	#30
ralphie628 Registered User Join Date: Dec 2009 Location: Chatsworth CA Posts: 243	Re: parting 72 suburban how much are you asking for the tilt?

06-28-2010, 07:49 AM	#32
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: parting 72 suburban Thanks for putting up the price. Sorry for the late reply. I think I will pass for now. Not because of the price but because I need a complete set of blazer belts and I don't know how much of your belts I can use. If I don't get a set soon and you still have these then I will get them from you. __________________ I don't always drive trucks; but when I do I prefer Chevy's. Stay driving my friends. '72 blazer 2wd build 67-72 Factory Big Block Registry

07-25-2010, 02:24 AM	#33
bullington All around good guy Join Date: May 2009 Location: Pendleton Oregon Posts: 131	Re: parting 72 suburban Is the tilt still available?

07-29-2010, 06:56 PM	#34
portugee14 Registered User Join Date: Nov 2007 Location: Hanford, Ca Posts: 29	Re: parting 72 suburban grill still available

07-30-2010, 07:42 AM	#35
bangingears Registered User Join Date: Nov 2009 Location: Erath,La. Posts: 25	Re: parting 72 suburban can u send pic of rear hatch?

08-11-2010, 10:54 PM	#37
18436572 Registered User Join Date: May 2010 Location: San Diego CA. Posts: 32	Re: parting 72 suburban How much $ for the third door ??

08-12-2010, 12:46 AM	#38
ConnDemned Registered User Join Date: Jul 2005 Location: Spanaway, WA Posts: 103	Re: parting 72 suburban Does it have the sport style back bumper? Looking for the brackets if so.

08-19-2010, 11:32 AM	#39
Tow Me Glen Join Date: Sep 2008 Location: Roseburg, Oregon Posts: 331	Re: parting 72 suburban Is the "chrome/stainless trim for side panels" you listed the pieces below the windows? If so whats the condition and how much? __________________ Glen Simpson Severed Ties - Oregon Roseburg, Oregon 1983 Chevrolet C10 - Ginger Photos 1970 Chevrolet C10 Suburban Build Page: 1970 Pale Shade of Brown Past Trucks 1981 GMC Crew Cab Short Bed Project Crewella: 1981 CCSB 1999 Chevrolet K2500 CCSB Photos

08-19-2010, 08:42 PM	#40
swmnboy Registered User Join Date: Sep 2008 Location: Ellsworth,MN Posts: 26	Re: parting 72 suburban How much for the lift gate? Do you have pictures?

09-17-2010, 12:50 AM	#41
71suburban/70CST Registered User Join Date: Feb 2010 Location: Chestertown, Md Posts: 102	Re: parting 72 suburban I am looking for the lower rear pannel below the tail gate. Do you have a decent one and if so how much? Thanks, Justin

09-24-2010, 01:54 AM	#42
68C10HotRod Registered User Join Date: Feb 2008 Location: Omaha, NE 68144 Posts: 333	Re: parting 72 suburban What condition are the rear cargo interior panels - pics? Are door panels still available? Best price on all panels shipped to 68134? Have you sold the front tub? I might be interested in some of the floor if available. Also rear sill between taillights - pics? __________________ Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery) Last edited by 68C10HotRod; 09-24-2010 at 01:56 AM. Reason: added rear sill

09-25-2010, 01:08 PM	#43
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Re: parting 72 suburban sorry guys, I haven't looked at my ad for ahwhile I'll get some extra pictures and prices shortly __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

09-25-2010, 01:29 PM	#45
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Re: parting 72 suburban tilt column is also still available $250 __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

09-26-2010, 11:18 AM	#46
Infanti www.infantimachine.com Join Date: May 2007 Location: Delta,BC Canada Posts: 311	Re: parting 72 suburban What shape is the body in,and how much? Gerry

09-28-2010, 05:26 PM	#50
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: parting 72 suburban PM'd ya



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.