'70 Stepside Build

[Mikem_72]

Its been a while since I've posted any updates and I've made a couple changes. So I was running a 350/350 setup and it was good and all but I just didn't like the 3 speed high rpms the transmission was giving me so I decided to go with a 700r4. I had a 350 bored over .030 in my garage that I had been working on and decided since I was going to change the transmission I might as well get the rebuilt motor ready and dropped in at the same time. These are before and after pictures of the motor. I went with some flat head pistons, Crane cam and lifters, and had the heads rebuilt by a coworker with all new seals, rods, and rockers all out of Summit.