Arkansas K10 - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67C10Step · 08-27-2021, 07:59 AM

Quote:

Originally Posted by Dieselwrencher

Larry, I'm not sure how I missed this one. Very nice attention to detail and awesome work on it. It's tough finding one of these up here that would have many metal left let a lone markings so it is nice to see where they actually might be.

By the way, beautiful 55 and Vette! e definitely have similar tastes. Haha

The other Larry and I have similar tastes as well, I just need my rich uncle to get out of the poor house to help me with my addiction.

**davischevy** · 09-12-2021, 08:20 PM

OK, we may be back on track. The painter delivered my cab to me today. He said to get the fenders, doors and hood worked and he would be ready for them.

**IronCanine** · 09-12-2021, 08:33 PM

Looking great Larry!

eager_adventurer · 09-15-2021, 10:46 AM

Quote:

Originally Posted by davischevy

OK, we may be back on track. The painter delivered my cab to me today. He said to get the fenders, doors and hood worked and he would be ready for them.

The color looks great!

**davischevy** · 09-16-2021, 03:58 PM

I reached a milestone.

**Ol Blue K20** · 09-12-2021, 10:39 PM

Awesome! You're on a roll.

67C10Step · 09-13-2021, 08:37 AM

Oh man. Looking great.

57taskforce · 09-13-2021, 10:02 AM

So you’ll have her back up and running in a week or so, right Larry?

**Dieselwrencher** · 09-15-2021, 10:03 AM

Very nice! When can you get mine done?

cak20 · 09-16-2021, 09:45 PM

looks great, love the color.

**Dieselwrencher** · 09-17-2021, 06:12 AM

Very nice!

**Ol Blue K20** · 09-17-2021, 09:39 AM

Yes you did, it's looking like a truck again!

**Richard** · 09-21-2021, 02:03 AM

Good to see the updates. Looks nice!

**davischevy** · 09-21-2021, 08:36 PM

It don't look like much, but, this was a PIA . It takes strong fingers to tug, push and pull the firewall mat into place.

**DeadheadNM** · 09-22-2021, 09:19 PM

Quote:

Originally Posted by davischevy

It don't look like much, but, this was a PIA . It takes strong fingers to tug, push and pull the firewall mat into place.

Good job. Don’t forget the insulation up under the dash top

**Joesjunk** · 09-23-2021, 08:49 AM

Looking good Larry!

**davischevy** · 10-20-2021, 10:57 PM

I have been detailing parts. I got the brake and clutch pedal assembly done. I suppose I could have cleaned the bench and swept the floor before, but I was excited.

**CUSTOM/10** · 10-21-2021, 09:03 PM

Quote:

Originally Posted by davischevy

It don't look like much, but, this was a PIA . It takes strong fingers to tug, push and pull the firewall mat into place.

Those plastic plugs are very difficult to install...... I found a place that had rubber plugs and they worked much better .....

Gary

**Louisvillekytruck** · 10-22-2021, 05:56 AM

Quote:

Originally Posted by CUSTOM/10

Those plastic plugs are very difficult to install...... I found a place that had rubber plugs and they worked much better .....

Gary

Where did u get the rubber plugs

**CUSTOM/10** · 10-22-2021, 07:44 AM

Quote:

Originally Posted by Louisvillekytruck

Where did u get the rubber plugs

Classic Industries lists them as being made of EPDM
Rubber.

Part# KW272A

Gary

**davischevy** · 11-27-2021, 11:56 PM

Quote:

Originally Posted by CUSTOM/10

Those plastic plugs are very difficult to install...... I found a place that had rubber plugs and they worked much better .....

Gary

I managed to save most of the original rubber plugs, and I have been hoarding them for years. The plastic ones are a pita.

I think the upper cowl insulation has finally been shipped, so I can get back on the dash area.

**davischevy** · 12-30-2021, 10:38 PM

I got back on this project today. The top of the dash should have been painted first , but, I forgot, so, I spent 2 hours masking so I could do it now.

The upper cowl insulation came in, so I can start installing dash components now.

**Dieselwrencher** · 09-21-2021, 09:13 PM

Nice work. I hated putting mine on. What a pain those plastic push clips are.

**Ol Blue K20** · 10-21-2021, 06:32 AM

Looks good, it'll be together in no time!

67C10Step · 10-21-2021, 08:06 AM

Nice work all the way around.

A clean workbench and shop floor is the sign of a sick mind.

09-12-2021, 08:20 PM	#2
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,789	Re: Arkansas K10 OK, we may be back on track. The painter delivered my cab to me today. He said to get the fenders, doors and hood worked and he would be ready for them. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

09-12-2021, 08:33 PM	#3
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,540	Re: Arkansas K10 Looking great Larry! __________________ 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

09-16-2021, 03:58 PM	#5
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,789	Re: Arkansas K10 I reached a milestone. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

09-12-2021, 10:39 PM	#6
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,848	Re: Arkansas K10 Awesome! You're on a roll. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

09-13-2021, 08:37 AM	#7
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,422	Re: Arkansas K10 Oh man. Looking great. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2020 Toyota CH-R 2020 Acura MDX

09-13-2021, 10:02 AM	#8
57taskforce All about them K’s Join Date: Jun 2014 Location: Farmington, New Mexico Posts: 6,244	Re: Arkansas K10 So you’ll have her back up and running in a week or so, right Larry? __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's ‘87 IROC-Z all original 50K mile survivor TPI 305 IROC Blue ‘10 Camaro 2SS/RS Aqua Blue Metallic #93 -version 2.0

09-15-2021, 10:03 AM	#9
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: Arkansas K10 Very nice! When can you get mine done? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-16-2021, 09:45 PM	#10
cak20 Registered User Join Date: Jul 2021 Location: Des Moines Posts: 31	Re: Arkansas K10 looks great, love the color.

09-17-2021, 06:12 AM	#11
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: Arkansas K10 Very nice! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-17-2021, 09:39 AM	#12
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,848	Re: Arkansas K10 Yes you did, it's looking like a truck again! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

09-21-2021, 02:03 AM	#13
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 2,712	Re: Arkansas K10 Good to see the updates. Looks nice! __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746

09-21-2021, 08:36 PM	#14
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,789	Re: Arkansas K10 It don't look like much, but, this was a PIA . It takes strong fingers to tug, push and pull the firewall mat into place. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

09-23-2021, 08:49 AM	#16
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	Re: Arkansas K10 Looking good Larry! __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

10-20-2021, 10:57 PM	#17
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,789	Re: Arkansas K10 I have been detailing parts. I got the brake and clutch pedal assembly done. I suppose I could have cleaned the bench and swept the floor before, but I was excited. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

12-30-2021, 10:38 PM	#22
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,789	Re: Arkansas K10 I got back on this project today. The top of the dash should have been painted first , but, I forgot, so, I spent 2 hours masking so I could do it now. The upper cowl insulation came in, so I can start installing dash components now. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.



Register or Log In To remove these advertisements.

09-21-2021, 09:13 PM	#23
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: Arkansas K10 Nice work. I hated putting mine on. What a pain those plastic push clips are. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-21-2021, 06:32 AM	#24
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,848	Re: Arkansas K10 Looks good, it'll be together in no time! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

10-21-2021, 08:06 AM	#25
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,422	Re: Arkansas K10 Nice work all the way around. A clean workbench and shop floor is the sign of a sick mind. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2020 Toyota CH-R 2020 Acura MDX

Register or Log In To remove these advertisements.