Pops 72 cheyenne dropmember build - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RCbowtie69 · 03-15-2011, 08:46 PM

NICE!!!!,keep on truckin''

**superflysteiny** · 03-16-2011, 01:36 PM

Quote:

Originally Posted by RCbowtie69

NICE!!!!,keep on truckin''

I am trying, I am putting in 18 to 19 hr days right now. My butt is wooped but I will get it done. Here are the rear fenders and the floor. I pick the motor up today. Cant wait.

Evan68chevy · 03-16-2011, 08:06 PM

New to the Site and have looked at your builds over the past couple days, VERY impressive what you can do with these amazing trucks. I am currently in the process of shaving the firewall on my 68 and like what you have done with yours. Hope to see that thing finished soon and roaming the SAC streets

2wd73blazer · 03-17-2011, 07:28 AM

subscribing

68 Quad C10 · 03-17-2011, 01:07 PM

Looking good man!!!

nuke1 · 03-17-2011, 05:37 PM

Me Likey!!

**superflysteiny** · 03-17-2011, 07:05 PM

Thanks guys motor and tranny are in I will get pics soon. Motor makes 550hp. Alot more then we thought so that is cool.
Posted via Mobile Device

CheyenneShop · 03-17-2011, 10:04 PM

Wow - you are kicking some serious tail - keep up the awesome work!

65Pickup · 03-18-2011, 12:20 AM

Quote:

Originally Posted by superflysteiny

Thanks guys motor and tranny are in I will get pics soon. Motor makes 550hp. Alot more then we thought so that is cool.
Posted via Mobile Device

Did I miss something??? What's the story on the motor, sounds cool.

**67cheby** · 03-18-2011, 10:12 AM

Quote:

Originally Posted by superflysteiny

thanks guys motor and tranny are in i will get pics soon. Motor makes 550hp. Alot more then we thought so that is cool.
posted via mobile device

is it soon yet ?????????????????

belowme51 · 04-13-2011, 11:54 AM

Quote:

Originally Posted by superflysteiny

Thanks guys motor and tranny are in I will get pics soon. Motor makes 550hp. Alot more then we thought so that is cool.
Posted via Mobile Device

what all was done to the inside of that motor other than the parts you listed. I like the AFR heads so you run the full rollers and keep the short original valve covers on it still.. When they did the dyno was it 550 at the crank or did they have the tranny hooked up too so 550 at the wheels?...The very near future is a Dart SHP400 which makes 550 at the wheels on pump gas so Id love to know if they port matched the heads to the intake to make a lill more. either way we both have kick a** motors!!!!!!

and the truck as turned out beautiful.

**superflysteiny** · 04-13-2011, 01:58 PM

I am not sure of all the specifics on the motor because I did not build it, but it is a full roller with a big cam I believe the heads are 198. It does have forged pistons and rods. I am not sure on the crank. It was on an engine dyno. I will try to get the dyno sheets from motor machine so I can post them. Hope this helps

**superflysteiny** · 04-13-2011, 02:12 PM

Glad you guys like it. Mario shot the motor last night. I put the rear bumper on and finished installing the air ride. Works great. I got the hood latch on and all bracing mounted. I am planning on trying to mount the motor this weekend. I will get some up dated pics asap. Thanks Eric

**FRENCHBLUE72** · 03-18-2011, 10:13 AM

Cant wait to see this monster motor in it..

**superflysteiny** · 03-18-2011, 12:29 PM

**67cheby** · 03-18-2011, 12:31 PM

nice...i love it when soon gets here!!!!

belowme51 · 03-18-2011, 12:41 PM

love it!!! Just gets better & better each picture.

VA72C10 · 03-18-2011, 12:49 PM

Super nice!!!

**FRENCHBLUE72** · 03-18-2011, 12:57 PM

This is gonna be a pretty understated truck.... The closer you get the better it gets..

2wd73blazer · 03-18-2011, 02:41 PM

Do you think the 4 link dropmember would work with your rims? What is the length of your rear from flange to flange? I have the 4 link dm coming but I LOVE the way your rims look. I wish my project was going as quick as yours is. Are you sure your talents arent being wasted on teeth?

nastyc10 · 03-18-2011, 03:04 PM

Looks awesome! It's coming along nice.

**superflysteiny** · 03-18-2011, 04:22 PM

[QUTE=2wd73blazer;4561342]Do you think the 4 link dropmember would work with your rims? What is the length of your rear from flange to flange? I have the 4 link dm coming but I LOVE the way your rims look. I wish my project was going as quick as yours is. Are you sure your talents arent being wasted on teeth?[/QUOTE]

You would have to ask nate but I am sure 4 link would work. I have 2.75 inches between the bag mount back of the wheel. As far as teeth think the trucks look nice you should see my pts teeth.

Posted via Mobile Device

**superflysteiny** · 03-18-2011, 04:28 PM

The motor is a small block 400 cubic inch. Forged pistons and rods. Afr 198 heads. Full roller rocker. Big ass cam. 3000 stall. Should burn the rubber off those 22
Posted via Mobile Device

Novelli · 03-18-2011, 05:45 PM

Done!

**67cheby** · 03-18-2011, 05:55 PM

AWESOME !!!now why aint it on the truck yet !!

03-15-2011, 08:46 PM	#1
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: Pops 72 cheyenne dropmember build NICE!!!!,keep on truckin''

03-16-2011, 08:06 PM	#3
Evan68chevy Registered User Join Date: Mar 2011 Location: Roseville Ca Posts: 74	Re: Pops 72 cheyenne dropmember build New to the Site and have looked at your builds over the past couple days, VERY impressive what you can do with these amazing trucks. I am currently in the process of shaving the firewall on my 68 and like what you have done with yours. Hope to see that thing finished soon and roaming the SAC streets

03-17-2011, 07:28 AM	#4
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Pops 72 cheyenne dropmember build subscribing

03-17-2011, 01:07 PM	#5
68 Quad C10 Registered User Join Date: Jul 2009 Location: Idaho Falls Posts: 324	Re: Pops 72 cheyenne dropmember build Looking good man!!! __________________ http://www.tandscustomcars.com/ My Quad Cab build:http://67-72chevytrucks.com/vboard/s...d.php?t=352342 IT"S GOT A ROOF NOW WHOO HOO!!!! 65 GTO Build (If you wanna check it out) http://67-72chevytrucks.com/vboard/s...40#post4503040

03-17-2011, 05:37 PM	#6
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Pops 72 cheyenne dropmember build Me Likey!! __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

03-17-2011, 07:05 PM	#7
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Thanks guys motor and tranny are in I will get pics soon. Motor makes 550hp. Alot more then we thought so that is cool. Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-17-2011, 10:04 PM	#8
CheyenneShop Registered User Join Date: Feb 2008 Location: Arizona Posts: 638	Re: Pops 72 cheyenne dropmember build Wow - you are kicking some serious tail - keep up the awesome work! __________________ 72 Cheyenne shorty "*CheyLow" 72 3/4 long 4X4 69 SWB "Prospector" 68 C/10 shorty - "Picacho"* http://67-72chevytrucks.com/vboard/s...d.php?t=428379 *sold to "93redsled"* Have you heard about *C10 Talk? C10 Talk* is a podcast all about C10 Trucks, the builders, the vendors, and most importantly the C10 Community. Check us out online at www.c10talk.com

04-13-2011, 01:58 PM	#12
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build I am not sure of all the specifics on the motor because I did not build it, but it is a full roller with a big cam I believe the heads are 198. It does have forged pistons and rods. I am not sure on the crank. It was on an engine dyno. I will try to get the dyno sheets from motor machine so I can post them. Hope this helps __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

04-13-2011, 02:12 PM	#13
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Glad you guys like it. Mario shot the motor last night. I put the rear bumper on and finished installing the air ride. Works great. I got the hood latch on and all bracing mounted. I am planning on trying to mount the motor this weekend. I will get some up dated pics asap. Thanks Eric __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-18-2011, 10:13 AM	#14
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Pops 72 cheyenne dropmember build Cant wait to see this monster motor in it.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-18-2011, 12:29 PM	#15
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-18-2011, 12:31 PM	#16
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Pops 72 cheyenne dropmember build nice...i love it when soon gets here!!!! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-18-2011, 12:41 PM	#17
belowme51 Registered User Join Date: Mar 2010 Location: roanoke va Posts: 582	Re: Pops 72 cheyenne dropmember build love it!!! Just gets better & better each picture.

03-18-2011, 12:49 PM	#18
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Pops 72 cheyenne dropmember build Super nice!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-18-2011, 12:57 PM	#19
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Pops 72 cheyenne dropmember build This is gonna be a pretty understated truck.... The closer you get the better it gets.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

03-18-2011, 02:41 PM	#20
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Pops 72 cheyenne dropmember build Do you think the 4 link dropmember would work with your rims? What is the length of your rear from flange to flange? I have the 4 link dm coming but I LOVE the way your rims look. I wish my project was going as quick as yours is. Are you sure your talents arent being wasted on teeth?

03-18-2011, 03:04 PM	#21
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Pops 72 cheyenne dropmember build Looks awesome! It's coming along nice.

03-18-2011, 04:22 PM	#22
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build [QUTE=2wd73blazer;4561342]Do you think the 4 link dropmember would work with your rims? What is the length of your rear from flange to flange? I have the 4 link dm coming but I LOVE the way your rims look. I wish my project was going as quick as yours is. Are you sure your talents arent being wasted on teeth?[/QUOTE] You would have to ask nate but I am sure 4 link would work. I have 2.75 inches between the bag mount back of the wheel. As far as teeth think the trucks look nice you should see my pts teeth. Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-18-2011, 04:28 PM	#23
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build The motor is a small block 400 cubic inch. Forged pistons and rods. Afr 198 heads. Full roller rocker. Big ass cam. 3000 stall. Should burn the rubber off those 22 Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-18-2011, 05:45 PM	#24
Novelli Registered User Join Date: Mar 2011 Location: Orangevale Posts: 13	Re: Pops 72 cheyenne dropmember build Done! Attached Images

03-18-2011, 05:55 PM	#25
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Pops 72 cheyenne dropmember build AWESOME !!!now why aint it on the truck yet !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Register or Log In To remove these advertisements.