rear blazer seat in sideways? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue4x4 · 01-09-2007, 11:10 AM

I was looking at purchacing a 70 blazer cst 4x4 85,000 original miles with tach dash. What I noticed was the rear seat was mounted sideways ( on the drivers side) and the rear tire was located behind the drivers seat. It looked all factory to me, Any Ideas?

bouncytruck · 01-09-2007, 12:29 PM

If it has the spare factory behind the driver's seat, the rig didn't come with a rear seat. check the build sheet on the glove box - it should be listed. As for mounting the seat sideways, it sounds like a bad idea. I'd look to see if they welded in some supports or just drilled holes through the thin bed metal. If the rig came with a rear seat factory, there should be some mounting points in the bed welded in place with threaded inserts - two in the front and 4 in the back (two of the four rear locations could be for seat belt bolts depending on how it was built.)

LUV2XCLR8 · 01-09-2007, 01:36 PM

At work now, but I have a detailed floor pic I could post later if you need it

Blue4x4 · 01-09-2007, 01:40 PM

There was no mounting hole in the standard areas, not sure about how the current ( sideways) location is mounted. Thanks

Blue4x4 · 01-09-2007, 01:40 PM

GQ: send the floor pic...thanks

LUV2XCLR8 · 01-10-2007, 08:49 PM

Quote:

Originally Posted by Blue4x4

GQ: send the floor pic...thanks

Here ya go, BTW the No damn idea is the jack hold down bracket holes

01-09-2007, 11:10 AM	#1
Blue4x4 Senior Member Join Date: Mar 2003 Location: Sparks, NV Posts: 790	rear blazer seat in sideways? I was looking at purchacing a 70 blazer cst 4x4 85,000 original miles with tach dash. What I noticed was the rear seat was mounted sideways ( on the drivers side) and the rear tire was located behind the drivers seat. It looked all factory to me, Any Ideas?

01-09-2007, 12:29 PM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: rear blazer seat in sideways? If it has the spare factory behind the driver's seat, the rig didn't come with a rear seat. check the build sheet on the glove box - it should be listed. As for mounting the seat sideways, it sounds like a bad idea. I'd look to see if they welded in some supports or just drilled holes through the thin bed metal. If the rig came with a rear seat factory, there should be some mounting points in the bed welded in place with threaded inserts - two in the front and 4 in the back (two of the four rear locations could be for seat belt bolts depending on how it was built.) __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

01-09-2007, 01:36 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: rear blazer seat in sideways? At work now, but I have a detailed floor pic I could post later if you need it __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-09-2007, 01:40 PM	#4
Blue4x4 Senior Member Join Date: Mar 2003 Location: Sparks, NV Posts: 790	Re: rear blazer seat in sideways? There was no mounting hole in the standard areas, not sure about how the current ( sideways) location is mounted. Thanks

01-09-2007, 01:40 PM	#5
Blue4x4 Senior Member Join Date: Mar 2003 Location: Sparks, NV Posts: 790	Re: rear blazer seat in sideways? GQ: send the floor pic...thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.