1968 C10 Project "The Twin" - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CAMAROBOY68SS** · 12-09-2022, 03:42 PM

Quote:

Originally Posted by FRENCHBLUE72

How are you liking the new headlights?

I love them, they are alot brighter at night and have a good pattern and they still keep the classic closer to stock look. Plus it was nice that it was truly plug and play.

**CAMAROBOY68SS** · 12-20-2022, 12:20 AM

Went to a local cars and coffee event over the weekend and one of the regular photographers took some great pics of the trunk in the morning light.

RCbowtie69 · 12-22-2022, 01:01 PM

Nice truck & Camaro,Keep on Truckin''

**CAMAROBOY68SS** · 01-28-2023, 02:07 PM

Little bucket seat swap updates. Got the covers back in November, finally remembered to take a picture of them before I get covering the frames.

**CAMAROBOY68SS** · 01-28-2023, 02:12 PM

Then as far the frames go, currently working on mocking up some track adaptors to use a set of 66/67 Chevelle bucket seat tracks in the cab Using some scrap wood to figure everything out, then will make it out of steel. Will then make some simple offset plates to mount the tracks to the floor and reuse the outer bench seat mount locations and then make similar ones for the inner mount.

wrangler94 · 01-28-2023, 03:40 PM

Awesome build, and beautiful truck. I hope one day mine will be in that kind of condition too, but for now just trying to get it back to a driver after sitting for at least 12 years. I do have one question though about your brake upgrade. Based on the pics it looks like maybe somehow you stayed 6 lug? Based on counting lug studs on that rear axle shaft. Is there a way to swap to disk brakes in the front and stay 6 lug?

**CAMAROBOY68SS** · 01-28-2023, 04:47 PM

Quote:

Originally Posted by wrangler94

Awesome build, and beautiful truck. I hope one day mine will be in that kind of condition too, but for now just trying to get it back to a driver after sitting for at least 12 years. I do have one question though about your brake upgrade. Based on the pics it looks like maybe somehow you stayed 6 lug? Based on counting lug studs on that rear axle shaft. Is there a way to swap to disk brakes in the front and stay 6 lug?

I bought a CPP disc brake kit. It had dropped spindles and then came with 6 lug rotors, you could have ordered the kit either with 6 lug or 5 lug. You can then always swap later on to 5 lug if you want to.

wrangler94 · 01-28-2023, 05:02 PM

Quote:

Originally Posted by CAMAROBOY68SS

I bought a CPP disc brake kit. It had dropped spindles and then came with 6 lug rotors, you could have ordered the kit either with 6 lug or 5 lug. You can then always swap later on to 5 lug if you want to.

CPP? Sorry, not familiar with that. I'm relearning the parts shopping for these old trucks. I'd like to keep the stock height and all, and not break the bank if there's a way to swap to disks and stay 6 lug to keep factory original look. Otherwise, if there's no other choice, I'll stay with drums all around.

**CAMAROBOY68SS** · 01-28-2023, 08:02 PM

Quote:

Originally Posted by wrangler94

CPP? Sorry, not familiar with that. I'm relearning the parts shopping for these old trucks. I'd like to keep the stock height and all, and not break the bank if there's a way to swap to disks and stay 6 lug to keep factory original look. Otherwise, if there's no other choice, I'll stay with drums all around.

CPP is a company that makes alot of suspension kits for various cars. I am sure there are some kits out there with stock height spindles with 6 lug, I saw a couple when I was looking at kits, but I was always going with dropped spindles so I cant recall where I saw them.

nicklear36 · 02-06-2023, 07:32 PM

Gorgeous. Your friend from Beaverton. I've seen this truck on TV highway!

**CAMAROBOY68SS** · 02-07-2023, 03:17 PM

Quote:

Originally Posted by nicklear36

Gorgeous. Your friend from Beaverton. I've seen this truck on TV highway!

lol thats awesome. Yeah cruise TV Hwy quite bit in the truck and ran into quite a few C10s on the road! Im ready for the drier weather to get back to cruising. Hope to catch you at one of the local cruises or get togethers on our side of town.

nicklear36 · 02-07-2023, 05:47 PM

Quote:

Originally Posted by CAMAROBOY68SS

lol thats awesome. Yeah cruise TV Hwy quite bit in the truck and ran into quite a few C10s on the road! Im ready for the drier weather to get back to cruising. Hope to catch you at one of the local cruises or get togethers on our side of town.

I'm new to Beaverton, what are some shows you attend?

**CAMAROBOY68SS** · 02-08-2023, 02:05 AM

Quote:

Originally Posted by nicklear36

I'm new to Beaverton, what are some shows you attend?

There is a nice cars and coffee on Saturday mornings in Sherwood, every Saturday rain or shine. There used to be a big friday night thing during the summers in Aloha at the Dairy Queen on Farmington.

Anymore I am have been driving to Vancouver or the east side for stuff because it seems thats where alot has moved to. If you have facebook, check out CRC10 or C10 Club Oregon. Most of the people there are Portland/Vancouver Metro and do quite a bit together with our trucks.

**CAMAROBOY68SS** · 04-11-2023, 12:43 AM

Trying to get a few things finished up before wrapping up the bucket seat swap in the truck. So have left the bench to still hit up some local cars and coffee events. Was the only C10 at this one over the weekend. Hopefully if all goes to plan this weekend the bench comes out and I can move forward to finish the buckets.

**CAMAROBOY68SS** · 04-14-2023, 11:54 PM

So finally made some progress on my bucket seat swap. Got the bench out today and got my adaptors made to use my chevelle seat tracks into the floor with minimal hole drilling in the floor.

**CAMAROBOY68SS** · 04-14-2023, 11:56 PM

some more of my steel adaptors for the conversion.

**CAMAROBOY68SS** · 04-14-2023, 11:58 PM

Also double checked my restored console that the shifter will clear while in gear.

**CAMAROBOY68SS** · 04-15-2023, 09:09 PM

Got all of my brackets wrapped up today and bolted in, got the tank cover in stalled and then got the console bolted in. Now down to doing the upholstery work on the seats and the swap will be all done.

**CAMAROBOY68SS** · 05-06-2023, 08:03 PM

Spent the day getting the seat covers pulled onto the foam and tied down. I am waiting on some hog ring pliers that I ordered to show up in the next day or so to finally wrap up the bucket seat swap.

**CAMAROBOY68SS** · 05-12-2023, 11:27 PM

Spent the day pulling, stretching and cussing while pulling the covers onto the frames for my buckets. Neither my grandfather or I are upholsterer, but we are happy with the results. The former high back frames did pretty good turning into low backs.

**68bowtie** · 05-12-2023, 11:50 PM

Ooooooh

chewychevy67 · 05-12-2023, 11:56 PM

Those look very nice. We'll done!

**68 C10 Driver** · 05-13-2023, 11:04 AM

Beautiful interior! I love the way the seats turned out. I hope my bench seat looks that good when I restore it. Thanks for the motivation.

**CAMAROBOY68SS** · 05-14-2023, 08:41 PM

Wrapped up a few little things left and then bolted the seats in for the final time. The swap is now complete and now its time to get back to cruising.

**68bowtie** · 05-15-2023, 01:26 AM

Real classy. Nice work!

12-20-2022, 12:20 AM	#77
CAMAROBOY68SS Senior Member Join Date: Apr 2022 Location: Hillsboro, Oregon Posts: 407	Re: 1968 C10 Project "The Twin" Went to a local cars and coffee event over the weekend and one of the regular photographers took some great pics of the trunk in the morning light. Attached Images __________________ The Twins: 1968 C10 SWB - Blue 327/5 Speed 1968 Camaro SS/RS - Blue 327/4speed C10 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=833278 The "Others" 1933 Ford Pickup (Camaro in disguise) 2017 Camaro SS Life long Chevy guy

12-22-2022, 01:01 PM	#78
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: 1968 C10 Project "The Twin" Nice truck & Camaro,Keep on Truckin'' __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e,

01-28-2023, 02:07 PM	#79
CAMAROBOY68SS Senior Member Join Date: Apr 2022 Location: Hillsboro, Oregon Posts: 407	Re: 1968 C10 Project "The Twin" Little bucket seat swap updates. Got the covers back in November, finally remembered to take a picture of them before I get covering the frames. Attached Images __________________ The Twins: 1968 C10 SWB - Blue 327/5 Speed 1968 Camaro SS/RS - Blue 327/4speed C10 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=833278 The "Others" 1933 Ford Pickup (Camaro in disguise) 2017 Camaro SS Life long Chevy guy

01-28-2023, 02:12 PM	#80
CAMAROBOY68SS Senior Member Join Date: Apr 2022 Location: Hillsboro, Oregon Posts: 407	Re: 1968 C10 Project "The Twin" Then as far the frames go, currently working on mocking up some track adaptors to use a set of 66/67 Chevelle bucket seat tracks in the cab Using some scrap wood to figure everything out, then will make it out of steel. Will then make some simple offset plates to mount the tracks to the floor and reuse the outer bench seat mount locations and then make similar ones for the inner mount. Attached Images __________________ The Twins: 1968 C10 SWB - Blue 327/5 Speed 1968 Camaro SS/RS - Blue 327/4speed C10 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=833278 The "Others" 1933 Ford Pickup (Camaro in disguise) 2017 Camaro SS Life long Chevy guy

01-28-2023, 03:40 PM	#81
wrangler94 Registered User Join Date: Jul 2008 Location: Washington, NC Posts: 88	Re: 1968 C10 Project "The Twin" Awesome build, and beautiful truck. I hope one day mine will be in that kind of condition too, but for now just trying to get it back to a driver after sitting for at least 12 years. I do have one question though about your brake upgrade. Based on the pics it looks like maybe somehow you stayed 6 lug? Based on counting lug studs on that rear axle shaft. Is there a way to swap to disk brakes in the front and stay 6 lug?

02-06-2023, 07:32 PM	#85
nicklear36 Registered User Join Date: Jun 2014 Location: Beaverton, Oregon Posts: 193	Re: 1968 C10 Project "The Twin" Gorgeous. Your friend from Beaverton. I've seen this truck on TV highway! __________________ My 1970 C10 ChassisFab LWB to SWB Build Thread

04-11-2023, 12:43 AM	#89
CAMAROBOY68SS Senior Member Join Date: Apr 2022 Location: Hillsboro, Oregon Posts: 407	Re: 1968 C10 Project "The Twin" Trying to get a few things finished up before wrapping up the bucket seat swap in the truck. So have left the bench to still hit up some local cars and coffee events. Was the only C10 at this one over the weekend. Hopefully if all goes to plan this weekend the bench comes out and I can move forward to finish the buckets. Attached Images __________________ The Twins: 1968 C10 SWB - Blue 327/5 Speed 1968 Camaro SS/RS - Blue 327/4speed C10 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=833278 The "Others" 1933 Ford Pickup (Camaro in disguise) 2017 Camaro SS Life long Chevy guy

04-14-2023, 11:54 PM	#90
CAMAROBOY68SS Senior Member Join Date: Apr 2022 Location: Hillsboro, Oregon Posts: 407	Re: 1968 C10 Project "The Twin" So finally made some progress on my bucket seat swap. Got the bench out today and got my adaptors made to use my chevelle seat tracks into the floor with minimal hole drilling in the floor. Attached Images __________________ The Twins: 1968 C10 SWB - Blue 327/5 Speed 1968 Camaro SS/RS - Blue 327/4speed C10 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=833278 The "Others" 1933 Ford Pickup (Camaro in disguise) 2017 Camaro SS Life long Chevy guy

04-14-2023, 11:56 PM	#91
CAMAROBOY68SS Senior Member Join Date: Apr 2022 Location: Hillsboro, Oregon Posts: 407	Re: 1968 C10 Project "The Twin" some more of my steel adaptors for the conversion. Attached Images __________________ The Twins: 1968 C10 SWB - Blue 327/5 Speed 1968 Camaro SS/RS - Blue 327/4speed C10 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=833278 The "Others" 1933 Ford Pickup (Camaro in disguise) 2017 Camaro SS Life long Chevy guy

04-14-2023, 11:58 PM	#92
CAMAROBOY68SS Senior Member Join Date: Apr 2022 Location: Hillsboro, Oregon Posts: 407	Re: 1968 C10 Project "The Twin" Also double checked my restored console that the shifter will clear while in gear. Attached Images __________________ The Twins: 1968 C10 SWB - Blue 327/5 Speed 1968 Camaro SS/RS - Blue 327/4speed C10 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=833278 The "Others" 1933 Ford Pickup (Camaro in disguise) 2017 Camaro SS Life long Chevy guy

04-15-2023, 09:09 PM	#93
CAMAROBOY68SS Senior Member Join Date: Apr 2022 Location: Hillsboro, Oregon Posts: 407	Re: 1968 C10 Project "The Twin" Got all of my brackets wrapped up today and bolted in, got the tank cover in stalled and then got the console bolted in. Now down to doing the upholstery work on the seats and the swap will be all done. Attached Images __________________ The Twins: 1968 C10 SWB - Blue 327/5 Speed 1968 Camaro SS/RS - Blue 327/4speed C10 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=833278 The "Others" 1933 Ford Pickup (Camaro in disguise) 2017 Camaro SS Life long Chevy guy

05-06-2023, 08:03 PM	#94
CAMAROBOY68SS Senior Member Join Date: Apr 2022 Location: Hillsboro, Oregon Posts: 407	Re: 1968 C10 Project "The Twin" Spent the day getting the seat covers pulled onto the foam and tied down. I am waiting on some hog ring pliers that I ordered to show up in the next day or so to finally wrap up the bucket seat swap. Attached Images __________________ The Twins: 1968 C10 SWB - Blue 327/5 Speed 1968 Camaro SS/RS - Blue 327/4speed C10 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=833278 The "Others" 1933 Ford Pickup (Camaro in disguise) 2017 Camaro SS Life long Chevy guy

05-12-2023, 11:27 PM	#95
CAMAROBOY68SS Senior Member Join Date: Apr 2022 Location: Hillsboro, Oregon Posts: 407	Re: 1968 C10 Project "The Twin" Spent the day pulling, stretching and cussing while pulling the covers onto the frames for my buckets. Neither my grandfather or I are upholsterer, but we are happy with the results. The former high back frames did pretty good turning into low backs. Attached Images __________________ The Twins: 1968 C10 SWB - Blue 327/5 Speed 1968 Camaro SS/RS - Blue 327/4speed C10 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=833278 The "Others" 1933 Ford Pickup (Camaro in disguise) 2017 Camaro SS Life long Chevy guy

05-12-2023, 11:50 PM	#96
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,340	Re: 1968 C10 Project "The Twin" Ooooooh __________________ I live in California, but identify as a Texan "If a job's worth doing, it's worth doing well" Project "Little Sister" (70 c10 blue original paint refresh) Project "C10 Fever" (68 factory black 396 swb) Project "Blue Bomb" (70 c30 blue original paint refresh) Project "Vitamin C" (71 c10 orange original paint refresh)

05-12-2023, 11:56 PM	#97
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,411	Re: 1968 C10 Project "The Twin" Those look very nice. We'll done!



Register or Log In To remove these advertisements.

05-13-2023, 11:04 AM	#98
68 C10 Driver Senior Member Join Date: Oct 2020 Location: Kathleen, GA Posts: 619	Re: 1968 C10 Project "The Twin" Beautiful interior! I love the way the seats turned out. I hope my bench seat looks that good when I restore it. Thanks for the motivation.

05-14-2023, 08:41 PM	#99
CAMAROBOY68SS Senior Member Join Date: Apr 2022 Location: Hillsboro, Oregon Posts: 407	Re: 1968 C10 Project "The Twin" Wrapped up a few little things left and then bolted the seats in for the final time. The swap is now complete and now its time to get back to cruising. Attached Images __________________ The Twins: 1968 C10 SWB - Blue 327/5 Speed 1968 Camaro SS/RS - Blue 327/4speed C10 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=833278 The "Others" 1933 Ford Pickup (Camaro in disguise) 2017 Camaro SS Life long Chevy guy

05-15-2023, 01:26 AM	#100
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,340	Re: 1968 C10 Project "The Twin" Real classy. Nice work! __________________ I live in California, but identify as a Texan "If a job's worth doing, it's worth doing well" Project "Little Sister" (70 c10 blue original paint refresh) Project "C10 Fever" (68 factory black 396 swb) Project "Blue Bomb" (70 c30 blue original paint refresh) Project "Vitamin C" (71 c10 orange original paint refresh)

Register or Log In To remove these advertisements.