LFD's Project Traizer 2WD closed cab. - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VROD383 · 03-07-2008, 11:34 PM

Rokcrln · 03-08-2008, 09:00 AM

Quote:

Originally Posted by kyle4381

Looks sweet Kevin.... Keep up the good work..

Kyle how is your blazer comming along, did you get the motor problems all taken care of?

Kevin
LFD Inc.

Angelse68cal · 03-08-2008, 10:28 AM

Man Kev you are the man ....Looking awsome cant wait to see it done.

kyle4381 · 03-12-2008, 09:42 AM

Quote:

Originally Posted by Rokcrln

Kyle how is your blazer comming along, did you get the motor problems all taken care of?

Kevin
LFD Inc.

Not much progress over here. I got a new toy and it has been burning up my free time.. But have been having a blast.

ColoradoK5 · 03-12-2008, 04:46 PM

That thing has Glamis (sp?) written all over it!!

**70STOVEBOLT** · 03-20-2008, 12:53 AM

Did this project stall out?

Rokcrln · 03-20-2008, 05:46 AM

Well here is a bit of todays progress!

I had some rocker panel problems so I am sectioning and slicing to get everything to fit right. I also patched the drivers side door inside and out and coated everything as it was going together. Drivers side is 100% done now and I hope to have the pass side finished up by Thursday and maybe ready to go back on the frame.

Kevin
LFD Inc.

Rokcrln · 03-20-2008, 05:48 AM

I also drilled the door hinges to help align them when going back on after patching.

Rokcrln · 03-20-2008, 05:50 AM

A few more.

Kevin
LFD Inc.

Rokcrln · 03-20-2008, 05:53 AM

The pass side needs to be longer and taller by about a 1/4". I tried two other rockers and they were the same. I checked the dimensions off a factory rocker and their was about a 3/16" diff so I figured why not just make it fit right.

Kevin
LFD Inc.

Rokcrln · 03-20-2008, 06:18 AM

Quote:

Originally Posted by 70STOVEBOLT

Did this project stall out?

Sorry I missed this before posting pics. I would not call it stalled out but it has been slower than I had hopped. I have a full time job 80 miles away as well as a 8month old son that I pick up on my way home and my wife does not get home untill 6pm so my time has been limited. But I have some time off work right now so I hope to get my part all finished up in the next week or so.

Kevin
LFD Inc.

kyle4381 · 03-20-2008, 07:34 AM

Even "stalled out" your projects move faster than most all I have seen.... Nice Work.

Do you sleep?

**70STOVEBOLT** · 03-20-2008, 05:36 PM

Kevin, I actually made that post after reading page 2, without realizing there were 7 pages in the thread. Sorry about that, I know from reading your threads that you are very busy, I don't know how you have time to work on anything with your schedule. Keep up the awesome work!

red71cheyenne · 03-22-2008, 03:59 AM

Kevin, what did you do to the inside of the doors to account for the rust? Blast and then coat? I pulled my door skins and did that before re-skinning them. Just wondered what you did that might have been easier. Jeff.

Rokcrln · 03-22-2008, 06:58 AM

Quote:

Originally Posted by red71cheyenne

Kevin, what did you do to the inside of the doors to account for the rust? Blast and then coat? I pulled my door skins and did that before re-skinning them. Just wondered what you did that might have been easier. Jeff.

Well I cut out all rust before the vehical was blasted. They did blast in side the door as much as they could then scrapped down inside as well. Then they epoxy coated everything. As I did the patch repairs I cleaned all areas that I could get to and coated them with rust encapsulator prior to any welding. Then once the patches were done and the doors were back up right I sprayed a heavy coat of encapsulator down in to the doors were the patching was done.

Is this perfect, No but it sure is alot better then factory and should last a real long time. I also sugest a few times a year that you check your drip holes in the bottom of the doors to make sure they are clear.

Kevin
LFD Inc.

Rokcrln · 03-22-2008, 07:01 AM

For todays progress I finished sectioning the pass side rocker and got it all installed and coated. I then replace the rocker box covers with new hardware and anti seize before puttin the fender brace's back inplace. I have one patch left to do to the pass door and it will be re-hung using the holes I drilled in the hinges.

Kevin
LFD Inc.

Big J · 03-22-2008, 07:22 AM

Thats lookin' good. I wish I'd of drilled some holes in the hinges like that. Oh well, lol.

Rokcrln · 03-23-2008, 01:40 AM

We are almost their! The body will meet the chassie for the first time in its new state in about 20min. Today I finished the pass door, spot welded part of the upper fire wall lip because the factory spot welds did not make contact. I installed a nut insert into the pass side upper fender mouint because the stock one was missing, installed the pedal asembly, sterring column, sterring box and cleaned the frame for the body drop

I also installed the tailgate hardware and gate to the new bed sides and had to slot some holes to get the gate to line up right. Once the gate was test fit I them welded the rear gate posts to the bed. My 68 tilt front end will be going on this blazer Monday and by Tuesday it should be ready to head out. This thing will be a body mans dream with it being all new and very straite almost ready for blocking and paint.

Kevin
LFD Inc.

Pop's72 · 03-23-2008, 02:08 AM

Looks damn good Kevin... Excellent work as always!!

Rokcrln · 03-23-2008, 07:24 AM

Now for the good pics! They talk for themselves.

Kevin
LFD Inc.

jugernot · 03-23-2008, 07:55 AM

Sweet. Is that the shop across the street? Nice of them to let you use the lift. Maybe one of these days when I have a day off, I can meet you at your house after work and give you a hand.

Let me know when you start the air ride suspension work on the blazer. I would really like to help with that. I think I'm free on Monday March 31.

Rokcrln · 03-23-2008, 10:08 AM

Quote:

Originally Posted by jugernot

Sweet. Is that the shop across the street? Nice of them to let you use the lift. Maybe one of these days when I have a day off, I can meet you at your house after work and give you a hand.

Let me know when you start the air ride suspension work on the blazer. I would really like to help with that. I think I'm free on Monday March 31.

Yes that is the shop. Paul has given me free rain of the lift if his guys are not using it. We do alot of trade work back and forth so it really does work out nice. Plus all I had to do was roll a body down the street to his shop, walk home and roll a frame down the street and a few minutes later I was pushing a rolling blazer home. I really need to get a lift at my house but first is my frame table and rotissory so I can start my Blazer build.
I will let you know next weekend what my shedule is looking like

Kevin
LFD Inc.

Big J · 03-23-2008, 06:27 PM

I imagine thats a relief getting it on the chassis. I can't wait to get that far. Lookin' good.

lyrikz · 03-23-2008, 06:56 PM

Quote:

Originally Posted by Rokcrln

Yes that is the shop. Paul has given me free rain of the lift if his guys are not using it. We do alot of trade work back and forth so it really does work out nice. Plus all I had to do was roll a body down the street to his shop, walk home and roll a frame down the street and a few minutes later I was pushing a rolling blazer home. I really need to get a lift at my house but first is my frame table and rotissory so I can start my Blazer build.
I will let you know next weekend what my shedule is looking like

Kevin
LFD Inc.

Great work K.

Dinos63 · 03-24-2008, 08:29 PM

kevin like always your work is unmatched. and i like the way you document all the steps

03-07-2008, 11:34 PM	#151
VROD383 Registered User Join Date: Dec 2007 Location: BAY AREA, CA Posts: 47	Re: LFD's Project Traizer 2WD closed cab.

03-08-2008, 10:28 AM	#153
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: LFD's Project Traizer 2WD closed cab. Man Kev you are the man ....Looking awsome cant wait to see it done.

03-12-2008, 04:46 PM	#155
ColoradoK5 Registered User Join Date: Jan 2007 Location: Denver Colorado Posts: 608	Re: LFD's Project Traizer 2WD closed cab. That thing has Glamis (sp?) written all over it!!

03-20-2008, 12:53 AM	#156
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,222	Re: LFD's Project Traizer 2WD closed cab. Did this project stall out? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-20-2008, 05:46 AM	#157
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's Project Traizer 2WD closed cab. Well here is a bit of todays progress! I had some rocker panel problems so I am sectioning and slicing to get everything to fit right. I also patched the drivers side door inside and out and coated everything as it was going together. Drivers side is 100% done now and I hope to have the pass side finished up by Thursday and maybe ready to go back on the frame. Kevin LFD Inc. Attached Images

03-20-2008, 05:48 AM	#158
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's Project Traizer 2WD closed cab. I also drilled the door hinges to help align them when going back on after patching. Attached Images Last edited by Rokcrln; 03-20-2008 at 05:48 AM.

03-20-2008, 05:50 AM	#159
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's Project Traizer 2WD closed cab. A few more. Kevin LFD Inc. Attached Images

03-20-2008, 05:53 AM	#160
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's Project Traizer 2WD closed cab. The pass side needs to be longer and taller by about a 1/4". I tried two other rockers and they were the same. I checked the dimensions off a factory rocker and their was about a 3/16" diff so I figured why not just make it fit right. Kevin LFD Inc. Attached Images

03-20-2008, 07:34 AM	#162
kyle4381 Senior Member Join Date: Nov 2005 Location: AZ Posts: 416	Re: LFD's Project Traizer 2WD closed cab. Even "stalled out" your projects move faster than most all I have seen.... Nice Work. Do you sleep?

03-20-2008, 05:36 PM	#163
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,222	Re: LFD's Project Traizer 2WD closed cab. Kevin, I actually made that post after reading page 2, without realizing there were 7 pages in the thread. Sorry about that, I know from reading your threads that you are very busy, I don't know how you have time to work on anything with your schedule. Keep up the awesome work! __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

03-22-2008, 03:59 AM	#164
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: LFD's Project Traizer 2WD closed cab. Kevin, what did you do to the inside of the doors to account for the rust? Blast and then coat? I pulled my door skins and did that before re-skinning them. Just wondered what you did that might have been easier. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

03-22-2008, 07:01 AM	#166
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's Project Traizer 2WD closed cab. For todays progress I finished sectioning the pass side rocker and got it all installed and coated. I then replace the rocker box covers with new hardware and anti seize before puttin the fender brace's back inplace. I have one patch left to do to the pass door and it will be re-hung using the holes I drilled in the hinges. Kevin LFD Inc. Attached Images

03-22-2008, 07:22 AM	#167
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: LFD's Project Traizer 2WD closed cab. Thats lookin' good. I wish I'd of drilled some holes in the hinges like that. Oh well, lol. __________________ BAZINGA! My Build

03-23-2008, 01:40 AM	#168
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's Project Traizer 2WD closed cab. We are almost their! The body will meet the chassie for the first time in its new state in about 20min. Today I finished the pass door, spot welded part of the upper fire wall lip because the factory spot welds did not make contact. I installed a nut insert into the pass side upper fender mouint because the stock one was missing, installed the pedal asembly, sterring column, sterring box and cleaned the frame for the body drop I also installed the tailgate hardware and gate to the new bed sides and had to slot some holes to get the gate to line up right. Once the gate was test fit I them welded the rear gate posts to the bed. My 68 tilt front end will be going on this blazer Monday and by Tuesday it should be ready to head out. This thing will be a body mans dream with it being all new and very straite almost ready for blocking and paint. Kevin LFD Inc.

03-23-2008, 02:08 AM	#169
Pop's72 It's ok to stare... Join Date: Dec 2004 Location: San Jose, CA Posts: 669	Re: LFD's Project Traizer 2WD closed cab. Looks damn good Kevin... Excellent work as always!! __________________ -Matt 1971 Blazer/Jimmy : Factory 2WD, Factory AC, Crate 350



Register or Log In To remove these advertisements.

03-23-2008, 07:24 AM	#170
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: LFD's Project Traizer 2WD closed cab. Now for the good pics! They talk for themselves. Kevin LFD Inc. Attached Images

03-23-2008, 07:55 AM	#171
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: LFD's Project Traizer 2WD closed cab. Sweet. Is that the shop across the street? Nice of them to let you use the lift. Maybe one of these days when I have a day off, I can meet you at your house after work and give you a hand. Let me know when you start the air ride suspension work on the blazer. I would really like to help with that. I think I'm free on Monday March 31. __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082 Last edited by jugernot; 03-23-2008 at 07:56 AM.

03-23-2008, 06:27 PM	#173
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: LFD's Project Traizer 2WD closed cab. I imagine thats a relief getting it on the chassis. I can't wait to get that far. Lookin' good. __________________ BAZINGA! My Build

03-24-2008, 08:29 PM	#175
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: LFD's Project Traizer 2WD closed cab. kevin like always your work is unmatched. and i like the way you document all the steps __________________ CHEVY ONLY... Nothin Else !

Register or Log In To remove these advertisements.