KS new thread SPRING 2011 alot OF 67-72 PARTS - Page 21 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972hays · 07-24-2011, 01:12 AM

how much for the 72 service manual? and do you still have the blue metal door panels

OldCrLvr · 07-24-2011, 02:36 AM

Randy,
I was skimming through the posts and got over whelmed. I'm looking for side trim that is drivers quality to restore. I need all Bottom's (prefer black so I don't have to strip the wood grain) and the upper trim for the bed as well as upper tailgate trim and the bezels for the tail lights. I think they were in post #62 and 64. My Zip is 95603.

teeitup · 07-24-2011, 07:47 AM

Silverboy02, I also have a grill center brace for $5, I can get a quote later today for you

1972Hays, I have one service manual left, I'll get a pic of it. I'll have to check on door panels later today

OldCrLvr, I'll have to look, I have alot of woodgrain but do have black too. I'll check later today

Thanks Randy

1972hays · 07-24-2011, 02:15 PM

ok cool thanks

1972hays · 07-24-2011, 04:00 PM

Here are the door panals im talking about and do you still have that tack dach

teeitup · 07-24-2011, 05:57 PM

Those panels are sold sorry, so is the tach. Thanks Randy

teeitup · 07-24-2011, 09:31 PM

1972Hays, I have some metal door panels that have been covered is all. Here is book, a little worn but still good

teeitup · 07-24-2011, 09:38 PM

OlCrLvr, I'll have these but it will be after the 3rd before I can get to them, not sure if I have all the bed pieces in black. They are not all perfect, some dings in them. $60 plus shipping for all the lower I have. Thanks Randy

HDBOB · 07-24-2011, 11:07 PM

Hi,
I am putting in a 402 / 400 where a 350 / 350 used to be. Do you know if I will need anything as far as engine/ Trans wire harness that wont swap in ? I have the kickdown set up.
Thanks Bob

1972hays · 07-24-2011, 11:16 PM

i think ill pass thanks alot though

**Cash3481** · 07-25-2011, 06:33 AM

Quote:

Originally Posted by teeitup

cash3481, Mike, sounds good, Thanks

Silverboy02, the only things I have out of that stuff right now are the outer and inner front bumper brackets $20 plus shipping for those

Thanks Randy

Randy, Payment has been sent! I forgot to post back when I sent it. Mike
Posted via Mobile Device

teeitup · 07-25-2011, 06:36 AM

Bob, you may need a engine harness, but I just sold my last one, sorry

1972hays, no problem

Mike, mailing out today, Thanks

Randy

HDBOB · 07-25-2011, 09:48 AM

OK, Thanks. I'll keep an eye out.

OldCrLvr · 07-30-2011, 02:21 PM

Quote:

Originally Posted by teeitup

OlCrLvr, I'll have these but it will be after the 3rd before I can get to them, not sure if I have all the bed pieces in black. They are not all perfect, some dings in them. $60 plus shipping for all the lower I have. Thanks Randy

Randy, I'll take it when you get to it. I'll PM you.

Dons72cheyennesuper · 08-02-2011, 03:55 PM

Hi Randy, I need the black a/c ball housings(left and right) if they are not broke at bottom and a std 72 cigarette lighter(need not work-non smoker,just plug the hole). Also whats the price on the flexfan in the one pic, looks like it has the stainless blades.
thanx,Don

teeitup · 08-02-2011, 11:05 PM

Dons, sold the black ones in this thread I may have another set. I think I have a cig lighter too but I need to look and make sure. I'll check the fans I have too. This thread is a old one so alot of this stuff has been sold. Thanks Randy

Bakenaz · 08-03-2011, 02:40 PM

I am looking for both 69 triangle mount side mirrors with arms. thanks

RagingAsian · 08-03-2011, 04:05 PM

Hi, I have a list of items that I am looking for and i was wondering if you had any of the following for a 1968 C20:

Blue Sunvisors (2)
The rearview mirror (1)
Passenger side door handle (outside)
any of the side molding for the outside.
any of the upper tailgate trim

RagingAsian · 08-03-2011, 04:06 PM

and teh trim that separates the door panel from the door (the thin strip of metal)

teeitup · 08-03-2011, 07:05 PM

Bakenaz, I'll look tonight

ragingAsian, I should have blue visors. Are you needing mirror and arm? I think I have a pass door handle. no outer trim. I have a pair out door sill plates. I'll get pics of what I have when I go back out there in awhile.

Thanks Randy

**truckdude239** · 08-03-2011, 08:02 PM

hey randy do you still have the bl;ue seat belts?

teeitup · 08-03-2011, 08:45 PM

David, I have some out there, I'll get a pic. Thanks Randy

**Cash3481** · 08-03-2011, 09:49 PM

Randy,
hope you enjoyed your vacation, any luck finding another carb spacer?
Mike
Posted via Mobile Device

teeitup · 08-03-2011, 09:51 PM

Dons72, I have these $25 plus shipping and this fan $10 plus shipping, I have a cig lighter out there do you female housing too?

teeitup · 08-03-2011, 09:51 PM

Bakenaz, sorry none out there

07-24-2011, 01:12 AM	#501
1972hays Registered User Join Date: Feb 2011 Location: A****er ca Posts: 475	Re: new thread SPRING 2011 alot OF 67-72 PARTS how much for the 72 service manual? and do you still have the blue metal door panels __________________ 72 chevrolet 4wd 350/350 swb fleet green mean army machine Last edited by 1972hays; 07-24-2011 at 01:19 AM.

07-24-2011, 02:36 AM	#502
OldCrLvr Registered User Join Date: Nov 2006 Location: Ophir, CA Posts: 39	Re: new thread SPRING 2011 alot OF 67-72 PARTS Randy, I was skimming through the posts and got over whelmed. I'm looking for side trim that is drivers quality to restore. I need all Bottom's (prefer black so I don't have to strip the wood grain) and the upper trim for the bed as well as upper tailgate trim and the bezels for the tail lights. I think they were in post #62 and 64. My Zip is 95603. __________________ 63 NovaSS 70 Custom/10 LWB 71 Malibu 00 Z71 ECSB

07-24-2011, 07:47 AM	#503
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: new thread SPRING 2011 alot OF 67-72 PARTS Silverboy02, I also have a grill center brace for $5, I can get a quote later today for you 1972Hays, I have one service manual left, I'll get a pic of it. I'll have to check on door panels later today OldCrLvr, I'll have to look, I have alot of woodgrain but do have black too. I'll check later today Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-24-2011, 02:15 PM	#504
1972hays Registered User Join Date: Feb 2011 Location: A****er ca Posts: 475	Re: new thread SPRING 2011 alot OF 67-72 PARTS ok cool thanks __________________ 72 chevrolet 4wd 350/350 swb fleet green mean army machine Last edited by 1972hays; 07-24-2011 at 03:49 PM.

07-24-2011, 04:00 PM	#505
1972hays Registered User Join Date: Feb 2011 Location: A****er ca Posts: 475	Re: new thread SPRING 2011 alot OF 67-72 PARTS Here are the door panals im talking about and do you still have that tack dach Attached Images __________________ 72 chevrolet 4wd 350/350 swb fleet green mean army machine

07-24-2011, 05:57 PM	#506
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: new thread SPRING 2011 alot OF 67-72 PARTS Those panels are sold sorry, so is the tach. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-24-2011, 09:31 PM	#507
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: new thread SPRING 2011 alot OF 67-72 PARTS 1972Hays, I have some metal door panels that have been covered is all. Here is book, a little worn but still good Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-24-2011, 09:38 PM	#508
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: new thread SPRING 2011 alot OF 67-72 PARTS OlCrLvr, I'll have these but it will be after the 3rd before I can get to them, not sure if I have all the bed pieces in black. They are not all perfect, some dings in them. $60 plus shipping for all the lower I have. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-24-2011, 11:07 PM	#509
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: new thread SPRING 2011 alot OF 67-72 PARTS Hi, I am putting in a 402 / 400 where a 350 / 350 used to be. Do you know if I will need anything as far as engine/ Trans wire harness that wont swap in ? I have the kickdown set up. Thanks Bob

07-24-2011, 11:16 PM	#510
1972hays Registered User Join Date: Feb 2011 Location: A****er ca Posts: 475	Re: new thread SPRING 2011 alot OF 67-72 PARTS i think ill pass thanks alot though __________________ 72 chevrolet 4wd 350/350 swb fleet green mean army machine

07-25-2011, 06:36 AM	#512
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: new thread SPRING 2011 alot OF 67-72 PARTS Bob, you may need a engine harness, but I just sold my last one, sorry 1972hays, no problem Mike, mailing out today, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-25-2011, 09:48 AM	#513
HDBOB Registered User Join Date: Jan 2011 Location: laconia NH Posts: 196	Re: new thread SPRING 2011 alot OF 67-72 PARTS OK, Thanks. I'll keep an eye out.

08-02-2011, 03:55 PM	#515
Dons72cheyennesuper Registered User Join Date: Jul 2011 Location: Brookfield, Ohio Posts: 18	Re: new thread SPRING 2011 alot OF 67-72 PARTS Hi Randy, I need the black a/c ball housings(left and right) if they are not broke at bottom and a std 72 cigarette lighter(need not work-non smoker,just plug the hole). Also whats the price on the flexfan in the one pic, looks like it has the stainless blades. thanx,Don

08-02-2011, 11:05 PM	#516
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: new thread SPRING 2011 alot OF 67-72 PARTS Dons, sold the black ones in this thread I may have another set. I think I have a cig lighter too but I need to look and make sure. I'll check the fans I have too. This thread is a old one so alot of this stuff has been sold. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-03-2011, 02:40 PM	#517
Bakenaz Registered User Join Date: Mar 2011 Location: Chandler AZ Posts: 28	Re: new thread SPRING 2011 alot OF 67-72 PARTS I am looking for both 69 triangle mount side mirrors with arms. thanks



Register or Log In To remove these advertisements.

08-03-2011, 04:05 PM	#518
RagingAsian Registered User Join Date: May 2011 Location: Arizona Posts: 144	Re: new thread SPRING 2011 alot OF 67-72 PARTS Hi, I have a list of items that I am looking for and i was wondering if you had any of the following for a 1968 C20: Blue Sunvisors (2) The rearview mirror (1) Passenger side door handle (outside) any of the side molding for the outside. any of the upper tailgate trim __________________ Susie-Honda Accord Coupe\|Elisa-1968 Chevy C20 Holdin' it down in the 520

08-03-2011, 04:06 PM	#519
RagingAsian Registered User Join Date: May 2011 Location: Arizona Posts: 144	Re: new thread SPRING 2011 alot OF 67-72 PARTS and teh trim that separates the door panel from the door (the thin strip of metal) __________________ Susie-Honda Accord Coupe\|Elisa-1968 Chevy C20 Holdin' it down in the 520

08-03-2011, 07:05 PM	#520
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: new thread SPRING 2011 alot OF 67-72 PARTS Bakenaz, I'll look tonight ragingAsian, I should have blue visors. Are you needing mirror and arm? I think I have a pass door handle. no outer trim. I have a pair out door sill plates. I'll get pics of what I have when I go back out there in awhile. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-03-2011, 08:02 PM	#521
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,217	Re: new thread SPRING 2011 alot OF 67-72 PARTS hey randy do you still have the bl;ue seat belts? __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

08-03-2011, 08:45 PM	#522
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: new thread SPRING 2011 alot OF 67-72 PARTS David, I have some out there, I'll get a pic. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-03-2011, 09:49 PM	#523
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: new thread SPRING 2011 alot OF 67-72 PARTS Randy, hope you enjoyed your vacation, any luck finding another carb spacer? Mike Posted via Mobile Device

08-03-2011, 09:51 PM	#524
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: new thread SPRING 2011 alot OF 67-72 PARTS Dons72, I have these $25 plus shipping and this fan $10 plus shipping, I have a cig lighter out there do you female housing too? Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 08-03-2011 at 09:56 PM.

08-03-2011, 09:51 PM	#525
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: new thread SPRING 2011 alot OF 67-72 PARTS Bakenaz, sorry none out there __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.