A '54 named Busty - Page 66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Gregski** · 04-20-2021, 03:49 PM

and a little before and after of the lid side

**Gregski** · 04-20-2021, 03:51 PM

then I hit it with some red primer and allowed it to bake in the sun for a day or two, while my OCD got the best of me and I went to town on the 10 bolts of this Ten Bolt Rear End

**8man** · 04-20-2021, 04:41 PM

You can see yourself!

daddyjeep · 04-21-2021, 10:04 AM

Quote:

Originally Posted by Gregski

a little stare and compare of the before (dirty) bowl and the after (clean) bowl

I don't know exactly why, but when you called it a bowl I had a great idea. Well it is a great idea in my opinion.... maybe not the wife's. I could use an old diff cover for a sink in the camper I'm building.

**Gregski** · 04-21-2021, 10:08 AM

Quote:

Originally Posted by daddyjeep

I don't know exactly why, but when you called it a bowl I had a great idea. Well it is a great idea in my opinion.... maybe not the wife's. I could use an old diff cover for a sink in the camper I'm building.

you're welcome, have you seen these?

dsraven · 04-21-2021, 10:30 AM

nice faucets, is that what you meant?
doesn't everybody have an transmission sink?
haha

**Gregski** · 04-21-2021, 10:33 AM

Quote:

Originally Posted by dsraven

nice faucets, is that what you meant?
doesn't everybody have an transmission sink?
haha

LOL, obviously ha ha actually I was pointing out the trick 2x4 base boards

**Gregski** · 04-22-2021, 10:34 AM

she got her eyeballs back

**Gregski** · 04-22-2021, 10:36 AM

put it on dry my butt...

6DoF · 04-22-2021, 10:38 AM

all that black up there ... something like this might look cool

https://smile.amazon.com/Vouke-Appro...9102201&sr=8-6

6DoF · 04-22-2021, 10:40 AM

are you using the lube-locker gasket or the RTV or both?

having tried a ton of solutions, i only RTV diff covers any more.

**Gregski** · 04-22-2021, 10:42 AM

Quote:

Originally Posted by 6DoF

all that black up there ... something like this might look cool

https://smile.amazon.com/Vouke-Appro...9102201&sr=8-6

Whoa, that is some advanced Terminator Shizwhaa !!!

**Gregski** · 04-22-2021, 10:44 AM

Quote:

Originally Posted by 6DoF

are you using the lube-locker gasket or the RTV or both?

having tried a ton of solutions, i only RTV diff covers any more.

both, a light coating of black RTV on the cover then the blue gasket then a light coat of black RTV on the punkin, I call it the OREO cookie solution, the RTV is just for stickability so the gasket don't slip around during mounting, and to fill tiny hairline scratches in the metal

6DoF · 04-22-2021, 10:44 AM

Quote:

Originally Posted by Gregski

Whoa, that is some advanced Terminator Shizwhaa !!!

yeah, not really the right look for the truck ... but all black.

something a little more normal

https://smile.amazon.com/gp/product/...ref_=pd_gw_unk

**Gregski** · 04-22-2021, 10:49 AM

Quote:

Originally Posted by 6DoF

yeah, not really the right look for the truck ... but all black.

something a little more normal

https://smile.amazon.com/gp/product/...ref_=pd_gw_unk

Yup, did you catch how a lot of that stuff is for a JEEP, I first noticed that when I got my steering column U joint coupler rubber boot.

6DoF · 04-22-2021, 11:30 AM

Quote:

Originally Posted by Gregski

Yup, did you catch how a lot of that stuff is for a JEEP, I first noticed that when I got my steering column U joint coupler rubber boot.

crazy marketing right? ... jeep ppl will buy anything, so sell em more for a Jeep with the search term!

same 7" bulb goes in my 55 chevy and my '99 Wrangler, easy to keep spares

texxxan · 04-22-2021, 03:44 PM

Awesome work and great progress. I love Busty.

**Gregski** · 04-22-2021, 11:22 PM

Quote:

Originally Posted by texxxan

Awesome work and great progress. I love Busty.

thanks bud, me too

**Gregski** · 04-22-2021, 11:57 PM

darn it I just lost a days worth of pics, I usually do cut and paste from my iPhone as I hate iTunes and today rather than pasting just the pics I wanted it pasted everything off my phone, so I did Undo and now everything on the phone is gone, darn it

here are a few I happened to send to a buddy of mine first

so upgraded to tail lights with reverse

**Gregski** · 04-23-2021, 12:01 AM

nothing says class like angle iron, am I right fellas?

6DoF · 04-23-2021, 06:51 AM

Quote:

Originally Posted by Gregski

nothing says class like angle iron, am I right fellas?

it's fitting for the jeep tail lights

:thumbsup:

texxxan · 04-23-2021, 06:53 AM

“Good enough for the women we date.”

Kevin Mac · 04-23-2021, 08:37 AM

The radius edges is really over the top!!
Mac

Bimus · 04-23-2021, 12:15 PM

wiper arms and switch

**Gregski** · 04-24-2021, 09:30 AM

fashioned the second tail light mounting bracket to match, shown here in their naked form atop a majestic blue county recycle bin as pedestal

below that we made them gray with primer

04-20-2021, 03:49 PM	#1626
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,803	Re: A '54 named Busty and a little before and after of the lid side Attached Images

04-20-2021, 03:51 PM	#1627
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,803	Re: A '54 named Busty then I hit it with some red primer and allowed it to bake in the sun for a day or two, while my OCD got the best of me and I went to town on the 10 bolts of this Ten Bolt Rear End Attached Images Last edited by Gregski; 04-22-2021 at 12:33 AM.

04-20-2021, 04:41 PM	#1628
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,278	Re: A '54 named Busty You can see yourself! __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

04-21-2021, 10:30 AM	#1631
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 7,833	Re: A '54 named Busty nice faucets, is that what you meant? doesn't everybody have an transmission sink? haha

04-22-2021, 10:34 AM	#1633
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,803	Re: A '54 named Busty she got her eyeballs back Attached Images

04-22-2021, 10:36 AM	#1634
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,803	Re: A '54 named Busty put it on dry my butt... Attached Images

04-22-2021, 10:38 AM	#1635
6DoF Registered User Join Date: Nov 2014 Location: somewhere, PA Posts: 1,022	Re: A '54 named Busty all that black up there ... something like this might look cool https://smile.amazon.com/Vouke-Appro...9102201&sr=8-6

04-22-2021, 10:40 AM	#1636
6DoF Registered User Join Date: Nov 2014 Location: somewhere, PA Posts: 1,022	Re: A '54 named Busty are you using the lube-locker gasket or the RTV or both? having tried a ton of solutions, i only RTV diff covers any more.

04-22-2021, 03:44 PM	#1642
texxxan Registered User Join Date: Jan 2012 Location: Hooks, Texas Posts: 163	Re: A '54 named Busty Awesome work and great progress. I love Busty.

04-22-2021, 11:57 PM	#1644
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,803	Re: A '54 named Busty darn it I just lost a days worth of pics, I usually do cut and paste from my iPhone as I hate iTunes and today rather than pasting just the pics I wanted it pasted everything off my phone, so I did Undo and now everything on the phone is gone, darn it here are a few I happened to send to a buddy of mine first so upgraded to tail lights with reverse Attached Images

04-23-2021, 12:01 AM	#1645
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,803	Re: A '54 named Busty nothing says class like angle iron, am I right fellas? Attached Images

04-23-2021, 06:53 AM	#1647
texxxan Registered User Join Date: Jan 2012 Location: Hooks, Texas Posts: 163	Re: A '54 named Busty “Good enough for the women we date.”

04-23-2021, 08:37 AM	#1648
Kevin Mac Registered User Join Date: Nov 2016 Location: Central Missouri Posts: 170	Re: A '54 named Busty The radius edges is really over the top!! Mac

04-23-2021, 12:15 PM	#1649
Bimus Registered User Join Date: Dec 2018 Location: Farmington NM Posts: 112	Re: A '54 named Busty wiper arms and switch Attached Images

04-24-2021, 09:30 AM	#1650
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,803	Re: A '54 named Busty fashioned the second tail light mounting bracket to match, shown here in their naked form atop a majestic blue county recycle bin as pedestal below that we made them gray with primer Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.