73-87 Chevy truck parts updated list - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1Ton · 12-11-2006, 04:28 PM

All parts located in Jamestown NY 14701
Drive train parts(pickup only):
1. turbo 400 2wd trans $200
2. 700r4 tranny bolt where linkage goes on broke in removal other than that it works fine. $200
3. 350 4 bolt from a 84 3/4ton never heard run it turns over fine. Complete from carb to pan including emission pump and tubes all intact. $250
4. t400 and NP205 fixed yoke t-case with crossmember and linkage. $700bo
5. Gov Lok from 12 bolt T $100 (can ship this)

Interior and body parts
1.pair of original GM doors with manual windows solid some surface rust $100 (don't care to ship these)

4. pair of blue manual window door panels. $50
5. Blue silverado AC dash pad mainly good for the silverado trim $20
6. Non tinted sliding rear window latch in good shape has rubber weatherstrip needs the plastic insert $30.00
7.Sliding window tinted latch in good shape has rubber weatherstrip needs the plastic insert $30.00
8.79 headlight bezels $50
9.Tailgate banner $50
10. Tailgate with small tailgate banner no rot some small dents $100
Some pics in old thread. http://67-72chevytrucks.com/vboard/s...d.php?t=190687
If you want to see pics of the rest ask.

**ScottH** · 12-11-2006, 04:55 PM

Would like to see pics of the dash pads.

Thanks.

1Ton · 12-11-2006, 05:22 PM

Will get them tonight for you.

kevinr1970 · 12-11-2006, 09:31 PM

Quote:

Originally Posted by 1Ton

3.Pair of blue power window door panels with lower carpet pieces. $75
4. pair of blue manual window door panels. $50

Would like to see some pictures, especialy of the manual panels. Are the power panels for truck/Blazer or Suburban (2 switch driver vs. 4 switch)?

1Ton · 12-11-2006, 09:34 PM

Quote:

Originally Posted by kevinr1970

Would like to see some pictures, especialy of the manual panels. Are the power panels for truck/Blazer or Suburban (2 switch driver vs. 4 switch)?

power are from a truck. I will get pics of the manual door panels tomorrow.

**ScottH** · 12-12-2006, 11:07 AM

Also could you get me closer pics of the headlight bezels? Looking for some with good chrome, no pitting.

Thanks.

1Ton · 12-12-2006, 11:17 AM

Quote:

Originally Posted by ScottH

Also could you get me closer pics of the headlight bezels? Looking for some with good chrome, no pitting.

Thanks.

Will do it tonight.

1Ton · 12-12-2006, 11:41 AM

Here are some pics of the dash pads. First and second pics are of the Scottsdale dashpad. i don't know where the pic of the top ended up. I will have it up today though.
The third and fourth are of the Silverado dash pad.
The silverado pad has more cracks than I thought. It is really only good for the trim on it. If interested make me an offer on it. Or I could sell you just the trim piece.

1Ton · 12-12-2006, 12:06 PM

here are some pics of the power door panels. I have all the brushed aluminum looking pices for both door panels. Some not pictured. Also the master window switch is no longer there.

SOLD

**ScottH** · 12-12-2006, 01:09 PM

What year is the dark blue one from? Will it fit a 79?

Thanks.

Scott

wedgemon · 12-12-2006, 01:41 PM

Would like a better pic of the 80 grille

1Ton · 12-12-2006, 04:51 PM

Quote:

Originally Posted by ScottH

What year is the dark blue one from? Will it fit a 79?

Thanks.

Scott

I believe it came out of a 84. I dont see why it wouldn't fit.
Here are a couple more pics.

1Ton · 12-12-2006, 04:52 PM

I will get better pics of the grill tonight.

**ScottH** · 12-12-2006, 05:14 PM

Thanks for the pics. After some investigation, it looks like 79-80 are unique so gonna have to pass. Still interested in the bezels pending pics.

thanks.

Scott

kevinr1970 · 12-13-2006, 03:16 AM

How about the non-power panels? Thanks in advance.

Quote:

Originally Posted by 1Ton

here are some pics of the power door panels. I have all the brushed aluminum looking pices for both door panels. Some not pictured. Also the master window switch is no longer there.

1Ton · 12-13-2006, 12:36 PM

Here are pics of the headlight bezels and the Grill.

**ScottH** · 12-13-2006, 12:42 PM

Thanks for the bezel pics. Can you tell me condition of the chrome? Hard to tell from pics. Also what would shipping be to 08753?

1Ton · 12-13-2006, 01:00 PM

It is not peeling anywhere and I dont see any pitting. They could use polishing. I will get shipping for you.

1Ton · 12-15-2006, 11:08 AM

Here are the manual door panels. The armrests are a little dirty and I have one to replace the one with cracks. The other will clean up fine.

1Ton · 12-15-2006, 12:24 PM

More door pics. ( the door panels aren't included with the doors)

1Ton · 12-27-2006, 05:46 PM

Ttt

marvxyz1 · 01-03-2007, 06:50 PM

1 Ton do you have proportioning valve to fit 80 GMC (in good working cond??
marvxyz1

1Ton · 01-03-2007, 11:05 PM

Sorry I dont have one.

bigblock73 · 01-03-2007, 11:45 PM

Can you post a pic or two of the tailgate, inside and out? Also, do you know what year truck it is off of? I am looking for a clean 73-76 "Chevrolet" gate.

Thanks.

1Ton · 01-04-2007, 12:17 AM

The gate came off a 84. I will find pics of it.

12-11-2006, 04:28 PM	#1
1Ton Registered User Join Date: Nov 2004 Location: Jamestown NY Posts: 731	73-87 Chevy truck parts updated list All parts located in Jamestown NY 14701 Drive train parts(pickup only): 1. turbo 400 2wd trans $200 2. 700r4 tranny bolt where linkage goes on broke in removal other than that it works fine. $200 3. 350 4 bolt from a 84 3/4ton never heard run it turns over fine. Complete from carb to pan including emission pump and tubes all intact. $250 4. t400 and NP205 fixed yoke t-case with crossmember and linkage. $700bo 5. Gov Lok from 12 bolt T $100 (can ship this) Interior and body parts 1.pair of original GM doors with manual windows solid some surface rust $100 (don't care to ship these) 4. pair of blue manual window door panels. $50 5. Blue silverado AC dash pad mainly good for the silverado trim $20 6. Non tinted sliding rear window latch in good shape has rubber weatherstrip needs the plastic insert $30.00 7.Sliding window tinted latch in good shape has rubber weatherstrip needs the plastic insert $30.00 8.79 headlight bezels $50 9.Tailgate banner $50 10. Tailgate with small tailgate banner no rot some small dents $100 Some pics in old thread. http://67-72chevytrucks.com/vboard/s...d.php?t=190687 If you want to see pics of the rest ask. __________________ Support your local search and rescue team.... GET LOST! Originally Posted by DURRTY if some is good more is better too much ought to be enough........ Last edited by 1Ton; 01-15-2007 at 07:41 PM.

12-11-2006, 04:55 PM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: 73-87 Chevy truck parts updated list Would like to see pics of the dash pads. Thanks.

12-11-2006, 05:22 PM	#3
1Ton Registered User Join Date: Nov 2004 Location: Jamestown NY Posts: 731	Re: 73-87 Chevy truck parts updated list Will get them tonight for you. __________________ Support your local search and rescue team.... GET LOST! Originally Posted by DURRTY if some is good more is better too much ought to be enough........

12-12-2006, 11:07 AM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: 73-87 Chevy truck parts updated list Also could you get me closer pics of the headlight bezels? Looking for some with good chrome, no pitting. Thanks.

12-12-2006, 11:41 AM	#8
1Ton Registered User Join Date: Nov 2004 Location: Jamestown NY Posts: 731	Re: 73-87 Chevy truck parts updated list Here are some pics of the dash pads. First and second pics are of the Scottsdale dashpad. i don't know where the pic of the top ended up. I will have it up today though. The third and fourth are of the Silverado dash pad. The silverado pad has more cracks than I thought. It is really only good for the trim on it. If interested make me an offer on it. Or I could sell you just the trim piece. Attached Images __________________ Support your local search and rescue team.... GET LOST! Originally Posted by DURRTY if some is good more is better too much ought to be enough........ Last edited by 1Ton; 12-12-2006 at 12:12 PM.

12-12-2006, 12:06 PM	#9
1Ton Registered User Join Date: Nov 2004 Location: Jamestown NY Posts: 731	Re: 73-87 Chevy truck parts updated list here are some pics of the power door panels. I have all the brushed aluminum looking pices for both door panels. Some not pictured. Also the master window switch is no longer there. SOLD SOLD __________________ Support your local search and rescue team.... GET LOST! Originally Posted by DURRTY if some is good more is better too much ought to be enough........ Last edited by 1Ton; 01-05-2007 at 10:36 PM.

12-12-2006, 01:09 PM	#10
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: 73-87 Chevy truck parts updated list What year is the dark blue one from? Will it fit a 79? Thanks. Scott

12-12-2006, 01:41 PM	#11
wedgemon Registered User Join Date: Jul 2004 Location: Spanish Springs, NV Posts: 1,171	Re: 73-87 Chevy truck parts updated list Would like a better pic of the 80 grille __________________ 2003 Silverado K1500 Z71 - Arrival Blue 1973 K5 Cheyenne Blazer 350/TH350/NP203 Kids Trucks:92 K1500 Blazer 5.7/700R4 4" lift. RETIRED: 1980 Scottsdale 4x4 Founding Member: "TILT WHEEL BELLY." Club

12-12-2006, 04:52 PM	#13
1Ton Registered User Join Date: Nov 2004 Location: Jamestown NY Posts: 731	Re: 73-87 Chevy truck parts updated list I will get better pics of the grill tonight. __________________ Support your local search and rescue team.... GET LOST! Originally Posted by DURRTY if some is good more is better too much ought to be enough........ Last edited by 1Ton; 12-12-2006 at 04:52 PM.

12-12-2006, 05:14 PM	#14
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: 73-87 Chevy truck parts updated list Thanks for the pics. After some investigation, it looks like 79-80 are unique so gonna have to pass. Still interested in the bezels pending pics. thanks. Scott

12-13-2006, 12:36 PM	#16
1Ton Registered User Join Date: Nov 2004 Location: Jamestown NY Posts: 731	Re: 73-87 Chevy truck parts updated list Here are pics of the headlight bezels and the Grill. __________________ Support your local search and rescue team.... GET LOST! Originally Posted by DURRTY if some is good more is better too much ought to be enough........

12-13-2006, 12:42 PM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: 73-87 Chevy truck parts updated list Thanks for the bezel pics. Can you tell me condition of the chrome? Hard to tell from pics. Also what would shipping be to 08753?

12-13-2006, 01:00 PM	#18
1Ton Registered User Join Date: Nov 2004 Location: Jamestown NY Posts: 731	Re: 73-87 Chevy truck parts updated list It is not peeling anywhere and I dont see any pitting. They could use polishing. I will get shipping for you. __________________ Support your local search and rescue team.... GET LOST! Originally Posted by DURRTY if some is good more is better too much ought to be enough........

12-15-2006, 11:08 AM	#19
1Ton Registered User Join Date: Nov 2004 Location: Jamestown NY Posts: 731	Re: 73-87 Chevy truck parts updated list Here are the manual door panels. The armrests are a little dirty and I have one to replace the one with cracks. The other will clean up fine. Attached Images __________________ Support your local search and rescue team.... GET LOST! Originally Posted by DURRTY if some is good more is better too much ought to be enough........ Last edited by 1Ton; 12-15-2006 at 12:11 PM.

12-15-2006, 12:24 PM	#20
1Ton Registered User Join Date: Nov 2004 Location: Jamestown NY Posts: 731	Re: 73-87 Chevy truck parts updated list More door pics. ( the door panels aren't included with the doors) __________________ Support your local search and rescue team.... GET LOST! Originally Posted by DURRTY if some is good more is better too much ought to be enough........



Register or Log In To remove these advertisements.

12-27-2006, 05:46 PM	#21
1Ton Registered User Join Date: Nov 2004 Location: Jamestown NY Posts: 731	Re: 73-87 Chevy truck parts updated list Ttt __________________ Support your local search and rescue team.... GET LOST! Originally Posted by DURRTY if some is good more is better too much ought to be enough........

01-03-2007, 06:50 PM	#22
marvxyz1 Registered User Join Date: Oct 2005 Location: Pittsburgh, Pa Posts: 106	Re: 73-87 Chevy truck parts updated list 1 Ton do you have proportioning valve to fit 80 GMC (in good working cond?? marvxyz1

01-03-2007, 11:05 PM	#23
1Ton Registered User Join Date: Nov 2004 Location: Jamestown NY Posts: 731	Re: 73-87 Chevy truck parts updated list Sorry I dont have one. __________________ Support your local search and rescue team.... GET LOST! Originally Posted by DURRTY if some is good more is better too much ought to be enough........

01-03-2007, 11:45 PM	#24
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: 73-87 Chevy truck parts updated list Can you post a pic or two of the tailgate, inside and out? Also, do you know what year truck it is off of? I am looking for a clean 73-76 "Chevrolet" gate. Thanks. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-04-2007, 12:17 AM	#25
1Ton Registered User Join Date: Nov 2004 Location: Jamestown NY Posts: 731	Re: 73-87 Chevy truck parts updated list The gate came off a 84. I will find pics of it. __________________ Support your local search and rescue team.... GET LOST! Originally Posted by DURRTY if some is good more is better too much ought to be enough........

Register or Log In To remove these advertisements.