Yesterday, 09:00 PM | #1 |
Registered User
Join Date: Jun 2017
Location: Oak View CA
Posts: 56
|
Bullet style starter
I have a 1968 K10 Suburban. Manual transmission. The starter is bullet style start. It’s a 3 bolt starter. Maybe 55-62 block not real sure. It’s bolts horizontal to the block, Not vertical like the normal small Block would.
I’m looking for an updated style or mini high torque starter that will fit the block. Last edited by srfinatsunset; Yesterday at 09:10 PM. |
Yesterday, 11:40 PM | #2 |
Registered User
Join Date: Dec 2017
Location: Elkhart, Texas
Posts: 1,542
|
Re: Bullet style starter
Look closer.. The starter isn't bolted to the block.. It's bolted to the bellhousing.. In the very beginning, Chevrolet designed the starter to mount to the bellhousing.. In 1955, when the first V8 was introduced, this mounting technique was continued for several more years. Judging from the picture, the starter you have is the early design high torque model.. Identified by its overall length.. The field windings are larger and require a longer starter main housing, identified by the copper extension between the solenoid and the winding terminal. I have this same starter on my 454 and it easily cranks the engine.
If the block is drilled for it, you can upgrade to a more modern starter but you may need to grind the bellhousing in that area to gain clearance. Last edited by RustyPile; Yesterday at 11:43 PM. Reason: added information |
Bookmarks |
|
|