CA Parting out 74 Chevy 3/4 ton 2wd* - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 01-30-2010, 09:12 PM

I have another truck to be parted. This one is a CA smog exempt truck with a tired big block and some rust issues as it was a mountain truck.
1974 bare cab with title (reg. is a few months ripe) $150 local SOLD
454 engine runs but weak $150 local SOLD
TH400 good runner $200 local
Holley carb $100 plus shipping
Radiator 4 core $50 local
Nice grill $50 plus shipping
454 headers $40 set plus shipping
8 lug front disc brake setup $75 local
All parts are for sale local also. Sale pending on hood, tilt, instrument bezel, dash bezel. Bed and back of frame sold. Please respond in thread for any parts you need. Thanks, Ray HOOD, INSTRUMENT BEZEL, DASH BEZEL SOLD

KrazyRay · 01-30-2010, 09:15 PM

pics

**71blksuper4x4** · 01-30-2010, 11:13 PM

Blue seat belts? Any shoulder belts? Trevor

Rogue_Sentinel · 01-31-2010, 12:16 AM

grille pics , when you get the time.thanks

**HOTFUN** · 01-31-2010, 11:07 AM

I'll go second in line on the tilt col with key and the RH woodgrain dash panel with ac louvers. Don't need steering wheel. Mark

Eighty-6 · 01-31-2010, 11:24 AM

If i was local i'd be all over that 454 :-)

glimmertwin01 · 01-31-2010, 12:27 PM

how much for the side mouldings (that make it a 2 tone) im interested if they are in decent shape.. the whole set inc the tailgaite pieces..

KrazyRay · 01-31-2010, 01:32 PM

Quote:

Originally Posted by 71blksuper4x4

Blue seat belts? Any shoulder belts? Trevor

Trevor, The belts are blue but no shoulder.

KrazyRay · 01-31-2010, 01:45 PM

The 454 is sold. A guy is coming down from Redding to buy outside trim, grill,steering wheel,jack,front bumper, and radiator. If he flakes, then I will go in order of response. I never get this much interest local. Maybe its because this is a pre smog truck in CA. Thanks, Ray

**HOTFUN** · 01-31-2010, 02:54 PM

What's the upper cab corner mouldings and cab back trim like? Is it a bow tie or a camper special emblem?

glimmertwin01 · 01-31-2010, 04:51 PM

well i asked because i didnt see a request for them and i could be interested in the head light doors too if they arent that pitted up

KrazyRay · 01-31-2010, 06:44 PM

Quote:

Originally Posted by HOTFUN

What's the upper cab corner mouldings and cab back trim like? Is it a bow tie or a camper special emblem?

The cab corners are camper special. My 79 silverado has the bow tie. Both sets look to be in good condition. I have a good back trim as well. $20 plus shipping for the 3 pieces. Thanks, Ray

KrazyRay · 01-31-2010, 06:46 PM

Quote:

Originally Posted by glimmertwin01

well i asked because i didnt see a request for them and i could be interested in the head light doors too if they arent that pitted up

The head light doors aka bezels? They are not pitted, but have some dings. $10pair plus shipping. Thanks, Ray

alf4444 · 01-31-2010, 07:48 PM

next in line for the door and fender molding!!

KrazyRay · 02-01-2010, 12:23 AM

The Redding guy is going to pass on everything except the grill. He will make his decision tonight on the grill. I'm not sure if the trim is any good. The front fender trim is banged up and I think there might be some extra screws in places.
Good steering wheel $25 plus shipping
Factory jack $25 shipped
Big block motor mounts and stands $80 shipped
Big block fan shroud good shape $80 plus shipping (maybe fits 72?)

cowboy5683 · 02-01-2010, 01:30 AM

Hey Ray..How is life treating ya?..Once again you look like yahave parts I need..lol..I am interested in the wiper switch and hardware for it..If ya got it lemme know whatcha want..thanx CJ

KrazyRay · 02-01-2010, 11:12 AM

Rogue Sentinel- the grill is your's if you want it.
glimmertwin01- Are you interested in the good pieces of trim?

Gregs71 · 02-02-2010, 01:30 AM

any idea how "ripe" the truck registration is on the cab itself?? I might be interested in it once its stripped down.

Rogue_Sentinel · 02-02-2010, 04:52 AM

shipping 2 27030 ?

KrazyRay · 02-02-2010, 10:58 AM

Quote:

Originally Posted by Gregs71

any idea how "ripe" the truck registration is on the cab itself?? I might be interested in it once its stripped down.

The registration expired July of 2009. Its well under a year. Sometimes you can go to DMV and beg them to waive the back fees. It worked on my 83 diesel truck.

bigblock73 · 02-02-2010, 02:47 PM

Ray, did you get my PM?

Scootin 81 C20 · 02-02-2010, 07:39 PM

Ray, does this truck or any of your others happen to have overload's on them? I need 1 overload "perch" I guess it would be called. Let me know. BTW, I'm still interested in my parts, just trying to save the money up.

Gregs71 · 02-02-2010, 10:54 PM

Quote:

Originally Posted by KrazyRay

The registration expired July of 2009. Its well under a year. Sometimes you can go to DMV and beg them to waive the back fees. It worked on my 83 diesel truck.

ray,

would you pm me the vin so i can look in to the back fees??

Greg

KrazyRay · 02-03-2010, 02:18 AM

Quote:

Originally Posted by Scootin 81 C20

Ray, does this truck or any of your others happen to have overload's on them? I need 1 overload "perch" I guess it would be called. Let me know. BTW, I'm still interested in my parts, just trying to save the money up.

I don't have any overload perches as the back end of all my trucks go to my friend for trailers. I still have your parts...no hurry. Thanks, Ray

DBLSPRT68 · 02-04-2010, 12:16 AM

Ray, let me know if the glide-out spare tire carrier is still there, and how much you want for it. Thanks, David

01-30-2010, 09:12 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting out 74 Chevy 3/4 ton 2wd* I have another truck to be parted. This one is a CA smog exempt truck with a tired big block and some rust issues as it was a mountain truck. 1974 bare cab with title (reg. is a few months ripe) $150 local SOLD 454 engine runs but weak $150 local SOLD TH400 good runner $200 local Holley carb $100 plus shipping Radiator 4 core $50 local Nice grill $50 plus shipping 454 headers $40 set plus shipping 8 lug front disc brake setup $75 local All parts are for sale local also. Sale pending on hood, tilt, instrument bezel, dash bezel. Bed and back of frame sold. Please respond in thread for any parts you need. Thanks, Ray HOOD, INSTRUMENT BEZEL, DASH BEZEL SOLD Attached Images Last edited by KrazyRay; 02-05-2010 at 10:48 PM.

01-30-2010, 09:15 PM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 74 Chevy 3/4 ton 2wd pics Attached Images

01-30-2010, 11:13 PM	#3
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,150	Re: Parting out 74 Chevy 3/4 ton 2wd Blue seat belts? Any shoulder belts? Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

01-31-2010, 12:16 AM	#4
Rogue_Sentinel Registered User Join Date: Mar 2009 Location: nc, mount airy Posts: 376	Re: Parting out 74 Chevy 3/4 ton 2wd grille pics , when you get the time.thanks __________________ "Myths and legends die hard in America. We love them for the extra dimension they provide, the illusion of near-infinite possibility to erase the narrow confines of most men's reality. Weird heroes and mould-breaking champions exist as living proof to those who need it that the tyranny of 'the rat race' is not yet final." Hunter S THompson

01-31-2010, 11:07 AM	#5
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,140	Re: Parting out 74 Chevy 3/4 ton 2wd I'll go second in line on the tilt col with key and the RH woodgrain dash panel with ac louvers. Don't need steering wheel. Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

01-31-2010, 11:24 AM	#6
Eighty-6 Registered User Join Date: Jul 2008 Location: Round Rock, Tx Posts: 249	Re: Parting out 74 Chevy 3/4 ton 2wd If i was local i'd be all over that 454 :-)

01-31-2010, 12:27 PM	#7
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting out 74 Chevy 3/4 ton 2wd how much for the side mouldings (that make it a 2 tone) im interested if they are in decent shape.. the whole set inc the tailgaite pieces.. __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

01-31-2010, 01:45 PM	#9
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 74 Chevy 3/4 ton 2wd The 454 is sold. A guy is coming down from Redding to buy outside trim, grill,steering wheel,jack,front bumper, and radiator. If he flakes, then I will go in order of response. I never get this much interest local. Maybe its because this is a pre smog truck in CA. Thanks, Ray

01-31-2010, 02:54 PM	#10
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,140	Re: Parting out 74 Chevy 3/4 ton 2wd What's the upper cab corner mouldings and cab back trim like? Is it a bow tie or a camper special emblem? __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

01-31-2010, 04:51 PM	#11
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting out 74 Chevy 3/4 ton 2wd well i asked because i didnt see a request for them and i could be interested in the head light doors too if they arent that pitted up __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

01-31-2010, 07:48 PM	#14
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Re: Parting out 74 Chevy 3/4 ton 2wd next in line for the door and fender molding!! __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

02-01-2010, 12:23 AM	#15
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 74 Chevy 3/4 ton 2wd The Redding guy is going to pass on everything except the grill. He will make his decision tonight on the grill. I'm not sure if the trim is any good. The front fender trim is banged up and I think there might be some extra screws in places. Good steering wheel $25 plus shipping Factory jack $25 shipped Big block motor mounts and stands $80 shipped Big block fan shroud good shape $80 plus shipping (maybe fits 72?) Attached Images

02-01-2010, 01:30 AM	#16
cowboy5683 Registered User Join Date: Jun 2009 Location: San Bernardino CA Posts: 94	Re: Parting out 74 Chevy 3/4 ton 2wd Hey Ray..How is life treating ya?..Once again you look like yahave parts I need..lol..I am interested in the wiper switch and hardware for it..If ya got it lemme know whatcha want..thanx CJ

02-01-2010, 11:12 AM	#17
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting out 74 Chevy 3/4 ton 2wd Rogue Sentinel- the grill is your's if you want it. glimmertwin01- Are you interested in the good pieces of trim? Attached Images

02-02-2010, 01:30 AM	#18
Gregs71 Registered User Join Date: Nov 2006 Location: Amador County, Ca. Posts: 229	Re: Parting out 74 Chevy 3/4 ton 2wd any idea how "ripe" the truck registration is on the cab itself?? I might be interested in it once its stripped down. __________________ 1995 GMC 4x4 1/2 ton 1999 Jeep Wrangler w/ 33's 68 camaro 350/350 1987 Chevy 3/4 ton 4x4 Suzuki DRZ 400s Dual Sport 1971 chevy long bed 2x4 194? Dodge 2.5 ton 1980 Chevy Cheyenne 4x4 1/2 ton I6/sm455 1989 Chevy V30 crewcab dually 454/TH400



Register or Log In To remove these advertisements.

02-02-2010, 04:52 AM	#19
Rogue_Sentinel Registered User Join Date: Mar 2009 Location: nc, mount airy Posts: 376	Re: Parting out 74 Chevy 3/4 ton 2wd shipping 2 27030 ? __________________ "Myths and legends die hard in America. We love them for the extra dimension they provide, the illusion of near-infinite possibility to erase the narrow confines of most men's reality. Weird heroes and mould-breaking champions exist as living proof to those who need it that the tyranny of 'the rat race' is not yet final." Hunter S THompson

02-02-2010, 02:47 PM	#21
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: Parting out 74 Chevy 3/4 ton 2wd Ray, did you get my PM? __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

02-02-2010, 07:39 PM	#22
Scootin 81 C20 3/4 Ton Rodder Join Date: Jan 2009 Location: Manlius, IL Posts: 1,146	Re: Parting out 74 Chevy 3/4 ton 2wd Ray, does this truck or any of your others happen to have overload's on them? I need 1 overload "perch" I guess it would be called. Let me know. BTW, I'm still interested in my parts, just trying to save the money up. __________________ 1981 Chevy Scottsdale C20 "Orange Crush": SOLD 1989 Chevy Silverado K2500: All Stock (For Now), 350 TBI/700R4. DD/Light Duty Toy.

02-04-2010, 12:16 AM	#25
DBLSPRT68 Registered User Join Date: Nov 2000 Location: Ft. Mill, SC USA Posts: 931	Re: Parting out 74 Chevy 3/4 ton 2wd Ray, let me know if the glide-out spare tire carrier is still there, and how much you want for it. Thanks, David __________________ PROJECT TRUCK: 1985 SWB C10 Silverado Black/Charcoal, 1990 V2500 Suburban, 2018 Suburban, 2005 GMC 2500HD CCSB, 2014 Toyota Camry SE, HAD.....1968 Camaro RS/SS Family owned since new; 350 3 speed SOLD

Register or Log In To remove these advertisements.