D52 Caliper Rear Disc Brake Brackets

[weircc]

does your kit require removing axles to install??? and is the price the same as front page
and also which wilwood caliber too use i see some different sizes??

[Captainfab]

You don't have to remove the axles to install these brackets, but you will have to, to remove the backing plates. Unless you cut them apart to get them past the axles. It really isn't difficult to remove the axles. When was the last time you changed the rear end oil? If it's been a while, it might be a good idea to pop the rear cover, R&R the axles, re-install the cover with a new gasket, and fill with your choice of gear oil......just sayin

Yes the price is still $232.00 plus $10.00 for shipping. The powder coating is still the same $28.00. You can use any D52 type caliper with this kit. Wilwood makes 2 different sizes of the dual piston D52 calipers. For the rear you will want the ones with the smaller pistons.....1.250" I believe.

Originally Posted by weircc

does your kit require removing axles to install??? and is the price the same as front page
and also which wilwood caliber too use i see some different sizes??

[Sabaka454]

Anyone run this set up with 15" wheels? I am interested in a set

[Captainfab]

Yes, 15" wheels will work with this conversion, as long as they are disc brake compatable wheels.