Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

prostreetC-10 · 08-17-2011, 04:59 PM

That Camaro is a little confusing at first glance. Has twins going into the catcher but butterflies on the front. How do the boost go down the throat if dem butterflies open up?

Dare I say this but it almost looks more ridiculous than cool.

1LOMARO · 08-17-2011, 05:07 PM

I think that was his plan.... he also owns the grey c10 beside it and its got double stacked blowers on it.

1Bad62Pro/Street · 08-27-2011, 08:04 PM

Quote:

Originally Posted by 1LOMARO

I think that was his plan.... he also owns the grey c10 beside it and its got double stacked blowers on it.

Do you know who done his bed?
I am going the same route.
Aluminum or Stainless Steel.
I rather have T-304 Stainless Steel.
http://67-72chevytrucks.com/vboard/s...d.php?t=321173

wutnxt · 08-27-2011, 10:05 PM

Well mine isn't done just yet but it's getting closer and closer......

wutnxt · 08-27-2011, 10:13 PM

Oh and here is what the tubs look like for the 33" x 21.5's.....they sit up so high so when i dump the air they have a place to go.....

LSPWRD67CHEVY · 08-28-2011, 09:25 AM

Here is my 67 15X4 in the front and 15X10 in the rear.

383Chevy · 09-08-2011, 05:13 PM

Quote:

Originally Posted by LSPWRD67CHEVY

Here is my 67 15X4 in the front and 15X10 in the rear.

What make rims are those, they look really nice

LSPWRD67CHEVY · 09-08-2011, 05:39 PM

Quote:

Originally Posted by 383Chevy

What make rims are those, they look really nice

They are Billet Specialties Street Lites

fryco · 09-16-2011, 10:55 PM

Quote:

Originally Posted by wutnxt

Oh and here is what the tubs look like for the 33" x 21.5's.....they sit up so high so when i dump the air they have a place to go.....

What did you use for tubs?

wutnxt · 09-16-2011, 11:01 PM

Quote:

Originally Posted by fryco

What did you use for tubs?

==================================================

Well after some thought we went with 4 inner 1972 box tubs and welded 2 together for each side....I wanted clean new tubs...and I really liked the way the rear tub lines up with the ridge on the side of the box. As a added bonus i need a rear tub with a flatter top and not something that was really round. With all of the travel in the bags I didn't want the tubs over the box sides....

1Bad62Pro/Street · 11-19-2011, 09:22 PM

1Bad62Pro/Street · 11-21-2011, 06:29 PM

Super Chevy Show at Zmax Dragway, Concord, NC ...

tubbedII · 11-21-2011, 07:07 PM

Is that blown/twin turbod?...Wow...

Wouldn't a lot of boost from the turbos escape through the big ugly's butterflies set up like that...or at least be conflicting in direction causing a weird turbulance? I know...this isn't a HP set up...more of a "just because I can" set up...but am I right?

bustedknuckles · 11-22-2011, 01:18 AM

Hey guys. New to posting here, been lurking for a long time. Here's my project. 84 gmc high sierra. These are the only full body shots I have right now. Its a bit more together now. Actually fired it up for the first time this past weekend.

It's still a mess under the hood, halfway still in mock up, and the carb finally showed up. I had to hear it run. 383/vortech v3.

shortbed70 · 11-22-2011, 07:45 AM

Quote:

Originally Posted by bustedknuckles

Hey guys. New to posting here, been lurking for a long time. Here's my project. 84 gmc high sierra. These are the only full body shots I have right now. Its a bit more together now. Actually fired it up for the first time this past weekend.

It's still a mess under the hood, halfway still in mock up, and the carb finally showed up. I had to hear it run. 383/vortech v3.

SICK!!!
Posted via Mobile Device

djracer · 11-22-2011, 08:12 AM

bustedknuckles

Congrats on getting her fired up and welcome to the board!

bustedknuckles · 11-22-2011, 09:50 AM

Thanks. Seems to be a great board. Tons of info.

J Knight · 11-22-2011, 10:10 AM

Very cool Mr Knuckles!!
Posted via Mobile Device

bustedknuckles · 11-22-2011, 10:27 AM

Thanks Mr. Knight. When ya coming by to check it out?

**Hart_Rod** · 11-22-2011, 10:44 AM

Quote:

Originally Posted by bustedknuckles

Thanks Mr. Knight. When ya coming by to check it out?

Nice setup! Is that a Vortech supercharger that you converted from their box to a top hat?

bustedknuckles · 11-22-2011, 10:54 AM

It came with their powerhat, which is a joke. I used a spectre hat and welded a 1" spacer to the bottom with an o-ring seal.

Here's a pic of the hat it came with.

J Knight · 11-22-2011, 11:16 AM

Quote:

Originally Posted by bustedknuckles

Thanks Mr. Knight. When ya coming by to check it out?

I'm going to see if I can get someone to fill in for me sat afternoon, I want to go to the autorama, so maybe Saturday.
Posted via Mobile Device

**Hart_Rod** · 11-22-2011, 11:19 AM

The hat looks pretty cool! Does in not work? I'm considering changing mine to the top hat and was wondering what all is involved. Are you going to run a blow-off valve?

bustedknuckles · 11-22-2011, 11:26 AM

Yes eventually. They say that the straighter the air is before it goes in the carb the more power it'll make. That hat bolted together with a filter inside it. No seal at all. I sold it to a guy for a rat rod. Your carb will have to be setup for blow thru. I bought a custom built billet aerosol from c&s specialties.

bustedknuckles · 11-22-2011, 11:55 AM

Forgot to add a pic of my favorite part of the truck, the tubs.

08-17-2011, 04:59 PM	#376
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! That Camaro is a little confusing at first glance. Has twins going into the catcher but butterflies on the front. How do the boost go down the throat if dem butterflies open up? Dare I say this but it almost looks more ridiculous than cool. __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

08-17-2011, 05:07 PM	#377
1LOMARO Registered User Join Date: Dec 2010 Location: Concord NC Posts: 21	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! I think that was his plan.... he also owns the grey c10 beside it and its got double stacked blowers on it. __________________ 94 K1500 Z-71. 350/4L60.300K miles!!! Mods are: Edelbrock Intake Edelbrock Cam and Lifters MSD Coil and Wires Hypertech Chip and T-stat Borla catback K&N Filter Hoping to start a pro sreet project soon!!!! Just gotta locate a 2wd short bed body first!!!

08-27-2011, 10:05 PM	#379
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! Well mine isn't done just yet but it's getting closer and closer...... Attached Images __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

08-27-2011, 10:13 PM	#380
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! Oh and here is what the tubs look like for the 33" x 21.5's.....they sit up so high so when i dump the air they have a place to go..... Attached Images __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

08-28-2011, 09:25 AM	#381
LSPWRD67CHEVY Registered User Join Date: Aug 2009 Location: Shawnee, OK Posts: 106	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! Here is my 67 15X4 in the front and 15X10 in the rear. Attached Images

11-19-2011, 09:22 PM	#386
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

11-21-2011, 07:07 PM	#388
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! Is that blown/twin turbod?...Wow... Wouldn't a lot of boost from the turbos escape through the big ugly's butterflies set up like that...or at least be conflicting in direction causing a weird turbulance? I know...this isn't a HP set up...more of a "just because I can" set up...but am I right? __________________ 1970 2wd Blazer

11-22-2011, 01:18 AM	#389
bustedknuckles Registered User Join Date: Nov 2011 Location: TEXAS Posts: 179	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! Hey guys. New to posting here, been lurking for a long time. Here's my project. 84 gmc high sierra. These are the only full body shots I have right now. Its a bit more together now. Actually fired it up for the first time this past weekend. It's still a mess under the hood, halfway still in mock up, and the carb finally showed up. I had to hear it run. 383/vortech v3.

11-22-2011, 08:12 AM	#391
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! bustedknuckles Congrats on getting her fired up and welcome to the board! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-22-2011, 09:50 AM	#392
bustedknuckles Registered User Join Date: Nov 2011 Location: TEXAS Posts: 179	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! Thanks. Seems to be a great board. Tons of info.

11-22-2011, 10:10 AM	#393
J Knight Registered User Join Date: Jun 2011 Location: Baytown TX Posts: 2,219	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! Very cool Mr Knuckles!! Posted via Mobile Device __________________ John 82 Chevy Silverado 350ci/TH350

11-22-2011, 10:27 AM	#394
bustedknuckles Registered User Join Date: Nov 2011 Location: TEXAS Posts: 179	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! Thanks Mr. Knight. When ya coming by to check it out?

11-22-2011, 10:54 AM	#396
bustedknuckles Registered User Join Date: Nov 2011 Location: TEXAS Posts: 179	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! It came with their powerhat, which is a joke. I used a spectre hat and welded a 1" spacer to the bottom with an o-ring seal. Here's a pic of the hat it came with.

11-22-2011, 11:19 AM	#398
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,831	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! The hat looks pretty cool! Does in not work? I'm considering changing mine to the top hat and was wondering what all is involved. Are you going to run a blow-off valve? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

11-22-2011, 11:26 AM	#399
bustedknuckles Registered User Join Date: Nov 2011 Location: TEXAS Posts: 179	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! Yes eventually. They say that the straighter the air is before it goes in the carb the more power it'll make. That hat bolted together with a filter inside it. No seal at all. I sold it to a guy for a rat rod. Your carb will have to be setup for blow thru. I bought a custom built billet aerosol from c&s specialties.



Register or Log In To remove these advertisements.

11-22-2011, 11:55 AM	#400
bustedknuckles Registered User Join Date: Nov 2011 Location: TEXAS Posts: 179	Re: Pro Street Trucks/Cars pics!!! im in love with the fatty tires!! Forgot to add a pic of my favorite part of the truck, the tubs. __________________ 84 GMCummins 91 CCSB Dually american squarebody association

Register or Log In To remove these advertisements.