Done with all the metal work - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mr Chevorlet · 05-16-2012, 09:18 PM

Finally done with all the metal work. Cab floors front and back, cab supports all four, rear cab corners. Inner, outer rockers. Its taken about a year because I haven't had much time to work on it. But now I am getting closer to primer stage. Maybe by next year I can have that done. I hope that was a joke. But you never know!

Lee H · 05-16-2012, 10:34 PM

Hang in there. It only gets better.
Posted via Mobile Device

mcbassin · 05-17-2012, 12:20 AM

Congrats on getting your metal work done. I know how time consuming this is. I have been there done that.

**70cst** · 05-17-2012, 01:25 AM

you are one step closer to being done

05-16-2012, 09:18 PM	#1
Mr Chevorlet Rusty Nuts Join Date: Sep 2008 Location: Clever Missouri Posts: 1,338	Done with all the metal work Finally done with all the metal work. Cab floors front and back, cab supports all four, rear cab corners. Inner, outer rockers. Its taken about a year because I haven't had much time to work on it. But now I am getting closer to primer stage. Maybe by next year I can have that done. I hope that was a joke. But you never know! Attached Images __________________ (Clever Missouri) Southwest Larry Mr Chevrolet My Build, The Marathon Truck http://67-72chevytrucks.com/vboard/s...d.php?t=604414

05-16-2012, 10:34 PM	#2
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,139	Re: Done with all the metal work Hang in there. It only gets better. Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

05-17-2012, 12:20 AM	#3
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Done with all the metal work Congrats on getting your metal work done. I know how time consuming this is. I have been there done that. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

05-17-2012, 01:25 AM	#4
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,339	Re: Done with all the metal work you are one step closer to being done __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.