AZ 70 suburban for parts - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Madkidd007** · 12-07-2018, 11:02 AM

Quote:

Originally Posted by t korinek

Madkidd007 I have a hatch it has some rust down in the bottom, nothing perfect, but probably better than most.
I do have good rear D pillars.

Would you mind shooting me a message with prices and possibly a picture of the worst parts of the hatch. I’d prefer to not have to do a crew cab conversion with this thing.

JMC3178 · 12-06-2018, 08:04 PM

Any chance you have the rear inner fender wells?

**t korinek** · 12-06-2018, 09:46 PM

Jmc, I have the blue inner fender wells $80 ea+ shipping, it would take a few days to get them out & boxed

**THECRAZYKIDJR** · 12-18-2018, 06:19 PM

Looking for

High floor hump

Spot welded tail & rev light inserts

Inside fuel neck cover for burb

Thank you for checking

**t korinek** · 12-19-2018, 11:19 PM

crazykid, I should have all of that do you need a high hump for an automatic?

**1968k20** · 12-20-2018, 06:53 AM

Do have have lower trim for 3rd door?

ItsMe253 · 12-20-2018, 09:10 AM

door panel, window regulator, tracks/channels, and glass for the rear stationary drivers side area with shipping to 98338?

**t korinek** · 12-20-2018, 09:49 AM

1968K20 I'll check on that trim.

itsme253, I'll check if the other people you messaged don't have them.

**Getter-Done** · 01-25-2019, 12:04 AM

Do you have the lower LH B-pillar section?
I would like the section that bolts to the floor.

Name: lhbp1.jpg
Views: 211
Size: 107.8 KB

cucvzuz · 01-25-2019, 03:29 PM

Im looking for a whole dash. Non air. Ok if it gas a radio hole cut

MONTE · 01-29-2019, 05:26 PM

Rear driver side glass?

**t korinek** · 02-10-2019, 11:49 PM

Getterdone, I do have that section if you still need it

Cucvzuz. Yes I do have a non ac uncut dash

Monte. Yes I do have that piece of glass

Thanks
Tom

**Getter-Done** · 02-11-2019, 06:28 AM

Thanks
How much for piece and shipping?
PM sent.

cucvzuz · 02-11-2019, 09:00 AM

How much for the dash

**t korinek** · 02-27-2019, 11:52 AM

Getter r done here’s a pic, I would just be cutting this whole section out,$120 + shipping.
Let me know what dimensions you would want.

Cucvzuz $100 for the dash + shipping

cucvzuz · 02-27-2019, 12:01 PM

Thank you I found one locally. Do you have any clean Pass front fenders?

**Getter-Done** · 02-27-2019, 12:10 PM

I would like the section below that
With the six bolt holes that bolts to the floor pan
I will take all that you are able to ship easily.
I could send a picture when I get home if
needed

**Getter-Done** · 02-27-2019, 02:55 PM

Better photo in next post.

cucvzuz · 03-06-2019, 08:53 AM

Do you have the chrome channel that holds the drivers rear trim panel in . The one that goes under the rear side window. Also how about the upper trim.

**t korinek** · 03-07-2019, 10:16 PM

I do have the rear trim piece inside, what upper trim? On the outside?

cucvzuz · 03-08-2019, 11:09 AM

Im looking for the passenger rear and 3rd door upper trim and lower pass behind the wheel and in front of the wheel.

**Getter-Done** · 03-08-2019, 10:42 PM

Parts arrived today.
Thank you so Much.
Great deal. Great Communication
Thanks for spending the time
to make this transaction happen.

OL SKOOL · 03-09-2019, 07:21 AM

Tom i'm looking for the radio hole repair panel. With the center a/c hole would be a plus. shipping to 60129 Thank you

MONTE · 03-10-2019, 10:00 PM

Do you have a headliner rail? Need the first rail.
Name: headliner1.jpg
Views: 109
Size: 11.6 KB

Also looking for the side panel hold downs . Left and right.
Name: 5555555555555555555555555555555555555555555555555555555555555555555555555_zps79835b81.jpg
Views: 129
Size: 18.4 KB

Name: 5555555555555555555555555555555555555555555555555555555555555555555555555_zps79835b81.jpg
Views: 129
Size: 18.4 KB

**southern parts** · 03-11-2019, 11:24 AM

Hey Tom, do you have the bolts for the tailgate supports?

12-06-2018, 08:04 PM	#2
JMC3178 Registered User Join Date: Aug 2016 Location: Fresno, CA Posts: 6	Re: 70 suburban for parts Any chance you have the rear inner fender wells?

12-06-2018, 09:46 PM	#3
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 70 suburban for parts Jmc, I have the blue inner fender wells $80 ea+ shipping, it would take a few days to get them out & boxed __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

12-18-2018, 06:19 PM	#4
THECRAZYKIDJR Registered User Join Date: Jun 2000 Location: GLENBURN, MAINE, USA Posts: 261	Re: 70 suburban for parts Looking for High floor hump Spot welded tail & rev light inserts Inside fuel neck cover for burb Thank you for checking __________________ JIM PARKER GLENBURN, MAINE 69 BURB 4WD - 307/4SPD/YELLOW 69 BLAZER (ORANGE / 35" SUPER SWAMPERS) 1970 CUSTOM-10

12-19-2018, 11:19 PM	#5
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 70 suburban for parts crazykid, I should have all of that do you need a high hump for an automatic? __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

12-20-2018, 06:53 AM	#6
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: 70 suburban for parts Do have have lower trim for 3rd door? __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

12-20-2018, 09:10 AM	#7
ItsMe253 Registered User Join Date: Aug 2017 Location: Graham Washington Posts: 4	Re: 70 suburban for parts door panel, window regulator, tracks/channels, and glass for the rear stationary drivers side area with shipping to 98338?

12-20-2018, 09:49 AM	#8
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 70 suburban for parts 1968K20 I'll check on that trim. itsme253, I'll check if the other people you messaged don't have them. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

01-25-2019, 12:04 AM	#9
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,792	Re: 70 suburban for parts Do you have the lower LH B-pillar section? I would like the section that bolts to the floor. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

01-25-2019, 03:29 PM	#10
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: 70 suburban for parts Im looking for a whole dash. Non air. Ok if it gas a radio hole cut

01-29-2019, 05:26 PM	#11
MONTE Registered User Join Date: Oct 2005 Location: Donna, Texas Posts: 286	Re: 70 suburban for parts Rear driver side glass?

02-10-2019, 11:49 PM	#12
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 70 suburban for parts Getterdone, I do have that section if you still need it Cucvzuz. Yes I do have a non ac uncut dash Monte. Yes I do have that piece of glass Thanks Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

02-11-2019, 06:28 AM	#13
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,792	Re: 70 suburban for parts Thanks How much for piece and shipping? PM sent. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

02-11-2019, 09:00 AM	#14
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: 70 suburban for parts How much for the dash

02-27-2019, 11:52 AM	#15
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 70 suburban for parts Getter r done here’s a pic, I would just be cutting this whole section out,$120 + shipping. Let me know what dimensions you would want. Cucvzuz $100 for the dash + shipping Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

02-27-2019, 12:01 PM	#16
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: 70 suburban for parts Thank you I found one locally. Do you have any clean Pass front fenders?



Register or Log In To remove these advertisements.

02-27-2019, 12:10 PM	#17
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,792	Re: 70 suburban for parts I would like the section below that With the six bolt holes that bolts to the floor pan I will take all that you are able to ship easily. I could send a picture when I get home if needed __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build Last edited by Getter-Done; 02-27-2019 at 02:43 PM. Reason: additionally info

02-27-2019, 02:55 PM	#18
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,792	Re: 70 suburban for parts Better photo in next post. Attached Images __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build Last edited by Getter-Done; 02-27-2019 at 07:47 PM. Reason: Better Photo

03-06-2019, 08:53 AM	#19
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: 70 suburban for parts Do you have the chrome channel that holds the drivers rear trim panel in . The one that goes under the rear side window. Also how about the upper trim.

03-07-2019, 10:16 PM	#20
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 70 suburban for parts I do have the rear trim piece inside, what upper trim? On the outside? __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-08-2019, 11:09 AM	#21
cucvzuz Registered User Join Date: Jul 2010 Location: howell mi Posts: 248	Re: 70 suburban for parts Im looking for the passenger rear and 3rd door upper trim and lower pass behind the wheel and in front of the wheel.

03-08-2019, 10:42 PM	#22
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,792	Re: 70 suburban for parts Parts arrived today. Thank you so Much. Great deal. Great Communication Thanks for spending the time to make this transaction happen. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

03-09-2019, 07:21 AM	#23
OL SKOOL Registered User Join Date: Feb 2010 Location: rochelle il. Posts: 356	Re: 70 suburban for parts Tom i'm looking for the radio hole repair panel. With the center a/c hole would be a plus. shipping to 60129 Thank you

03-10-2019, 10:00 PM	#24
MONTE Registered User Join Date: Oct 2005 Location: Donna, Texas Posts: 286	Re: 70 suburban for parts Do you have a headliner rail? Need the first rail. Also looking for the side panel hold downs . Left and right.

03-11-2019, 11:24 AM	#25
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 70 suburban for parts Hey Tom, do you have the bolts for the tailgate supports?

Register or Log In To remove these advertisements.