|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-10-2022, 04:48 PM
|
#1 |
|
Registered User
Join Date: Apr 2012
Location: DFW
Posts: 123
|
Filling Body Line - Subs/Panels
Curious if anyone has filled the cavity just below the drip rail to match the lower part of the body line where it meets the flat panel. I've looked for pictures but not found any. Of course, it runs the entire length of the roof line.
|
|
|
|
04-10-2022, 09:21 PM
|
#2 |
|
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,844
|
Re: Filling Body Line - Subs/Panels
seam sealer would likely work.
check the assembly manual and see if there was originally a sealer there, maybe just dried up and fell out or possibly was sandblasted out or whatever. |
|
|
|
|
04-11-2022, 05:56 PM
|
#3 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,317
|
Re: Filling Body Line - Subs/Panels
Are you saying that you want to remove this strip and put a filler panel in to have the whole side smooth up to the drip rail?
I had a 57 Panel back in the 70's but have no idea of what it looks like behind that strip.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
