The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Paint & Bodywork

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-12-2021, 09:10 AM   #1
ItWillBeSlow
Registered User
 
ItWillBeSlow's Avatar
 
Join Date: May 2013
Location: You're the only 10 I see
Posts: 367
What was under your factory paint?

Im in the last stage of getting my truck to bare metal. The hood is my last big piece and I started removing paint yesterday. This truck has OE paint + 1 respray + 1 cot of old primer on it.

There are tiny rust patches (not exactly pits) all over the hood. My roof skin was the same, as was the cowl. The horizontal surfaces have much more than the doors and fenders did. These are just into the metal enough that my surface prep discs wont take it off.

This is too much to hit with my spot blaster and I plan to have the hood media blasted professionally.

Is this type and quantity of rust normal? Aside from the obvious scratched areas, how does this form under the paint?
Attached Images
   
__________________
1972 C20
ItWillBeSlow is offline   Reply With Quote
Old 09-18-2021, 07:23 AM   #2
ItWillBeSlow
Registered User
 
ItWillBeSlow's Avatar
 
Join Date: May 2013
Location: You're the only 10 I see
Posts: 367
Re: What was under your factory paint?

No takers?


At this point I am planning on buying a repop hood. The surface rust on the inside of the hood is too much to handle with my spot blaster and the professionals I called are 3 weeks out.
__________________
1972 C20
ItWillBeSlow is offline   Reply With Quote
Old 09-18-2021, 11:27 AM   #3
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,557
Re: What was under your factory paint?

You may be real disappointed with a repop hood..
media blasting can make a mess of it if they dont know what they're doing..
But if they do blast it, then lay down epoxy primer followed by high build primer and most of that will disappear..then if you still see any spots, some metal glaze filler followed by more high build will do the trick
It looks to be in pretty good shape otherwise
I've been watching videos put out by Wray Schelin ..he really likes using naval jelly..I've never used it myself though so I have no opinion on it
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 09-18-2021, 12:07 PM   #4
lupo
Registered User
 
Join Date: Aug 2019
Location: usa
Posts: 184
Re: What was under your factory paint?

Okay I'll bite. Strip the paint off with the disc. Invest in a quart of rust remover / metal prep which will dissolve the rust and leave a zinc phosphate film which will inhibit further rusting While you have the hood off dump the rust remover prep down into the seams because if it rusts that's the first place it'll go
. Seal it ,and Prime and paint it. If you use a coarse Grit 80 be sure to apply enough coats of primer and sealer to ensure that you do not get sand swell marks after you paint the vehicle. Having painted for the last 40 years I cringe when I think of people using 80 grit but that's the common advice today. if you decide to replace the hood for replacement panels , asked around, to make sure it fits properly a lot of them don't.
lupo is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:47 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com