Parting out '72 Custom Deluxe-20 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hardrock2 · 10-08-2003, 11:26 PM

RodC: Here's a couple pics of the vents.

Hardrock2 · 10-08-2003, 11:32 PM

RodC:

Another pic.

Solver: I found a pair of SS bases for the short tripod mirrors, but no good mirror heads. Sorry! How's $10 a piece sound?

Hardrock2 · 10-08-2003, 11:37 PM

Solver:

Window regulators. Need the usual cleaning, pretty tight mechanism, decent rollers, GOOD splines. (no vice-grips here!)

The pass side was stiff from pine needles! The door was full of them!

Hardrock2 · 10-09-2003, 12:03 AM

MJN:

Rims. The GB shows option #S89 16.5 X 8.25 wheels.
Sure looks like them. I'll peel a tire off and measure to make sure.

Still diggin' for those A/C parts, guys!
If you aren't in a big hurry, I'll probably get a few set-ups sorted out and post a new separate thread on them.

mocwon: On the seat tracks, I'll need to know what seat you have. The standard seat has a different height track than the "full foam" seat. C-10, 20, 30 trucks usually had the standard seat.
Custom trim and above had the "cushy" full foam seats. (usually)
Either set in good condition, needing the usual blast, paint, etc.
$25.00

wild4wheels: regular 1/2-3/4 ton swaybar w/brackets $25.00

Or I can get you a big 1-ton bar w/brackets for $40.00

She's pretty much gone now, just a few things left.
I think I'll get a pic of the good remaining parts and make a final post.
Everyone pause for a moment of silence, while we lay another beloved parts truck to rest!

I appreceiate everyone patience, I've been running 4 ways from straight this past week!

Mike

jorgensensc · 10-09-2003, 12:32 AM

If wild4wheels doesn't want 1 of the sway bars and shipping isn't too expensive to 92055, I would like to buy one or the other

Hardrock2 · 10-10-2003, 05:06 PM

RodC:

Your vent windows are ready, and I just got the blue center belts all cleaned up. Found two good blue buckle covers, also.

GM
IRVIN MODEL# SB 692
33 A 71

Look like they will do ya?

Shipping for all looks to be $8.00 FedEx ground.

Mike

Duffy · 10-11-2003, 11:33 PM

How much for the big block frame mounts and floor heat shield, including shipping to my zip 59106?

Interested...
Duffy

Hardrock2 · 10-12-2003, 01:14 AM

jorgensensc,

Looks like shipping on the swaybar should be about $14.00

Duffy,

Sorry, one guy got all the BB stuff. Just need to get it off/out yet.

BB towers and mounts SOLD
BB floor heat shield SOLD
BB remote P.S. res. SOLD
BB dual ex. hangars SOLD

Still have the rear end for sale.
Anybody want it, and close enough to come pick it up?

Mike

chiphayes · 10-12-2003, 08:24 AM

hows the windsheild?and did you sell the vent windows?and window regulators?if not .how much ?were at in illinois are you ?i could drive there and save the shipping.im in indiana,but real close to the ill. line,danville area

Hardrock2 · 10-12-2003, 02:54 PM

chiphayes,

Windshield isn't cracked, but starting to get cloudy in the corners.

Vent windows are SOLD, but I do still have the regulators.
$25.00 EA.

I might have another good pair of vents, but need to check.
Some are in trucks that need to stay "weather tight" for the moment. Winter coming, and all.

I'm right at an hour straight West of Terre Haute IN.
A little past I-57. It usually takes me about an hour to get to Bryant's Salvage in Danville.

Mike

Truckhead · 10-12-2003, 08:05 PM

How's the steering column? Is it an automatic column, if so then i could use it. A tilt column would be nice too.

Hardrock2 · 10-12-2003, 08:15 PM

truckhead,

The auto column is tight. Doesn't appear to have been into.

Indicator and fiber-optic (light) are there, shift lever chrome is pitted. Would need cosmetic resto. (paint) $75.00

Mike

10-08-2003, 11:26 PM	#26
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	RodC: Here's a couple pics of the vents. Attached Images __________________ hardrock2

10-08-2003, 11:32 PM	#27
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	RodC: Another pic. Solver: I found a pair of SS bases for the short tripod mirrors, but no good mirror heads. Sorry! How's $10 a piece sound? Attached Images __________________ hardrock2

10-08-2003, 11:37 PM	#28
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	Solver: Window regulators. Need the usual cleaning, pretty tight mechanism, decent rollers, GOOD splines. (no vice-grips here!) The pass side was stiff from pine needles! The door was full of them! Attached Images __________________ hardrock2 Last edited by Hardrock2; 10-08-2003 at 11:40 PM.

10-09-2003, 12:03 AM	#29
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	MJN: Rims. The GB shows option #S89 16.5 X 8.25 wheels. Sure looks like them. I'll peel a tire off and measure to make sure. Still diggin' for those A/C parts, guys! If you aren't in a big hurry, I'll probably get a few set-ups sorted out and post a new separate thread on them. mocwon: On the seat tracks, I'll need to know what seat you have. The standard seat has a different height track than the "full foam" seat. C-10, 20, 30 trucks usually had the standard seat. Custom trim and above had the "cushy" full foam seats. (usually) Either set in good condition, needing the usual blast, paint, etc. $25.00 wild4wheels: regular 1/2-3/4 ton swaybar w/brackets $25.00 Or I can get you a big 1-ton bar w/brackets for $40.00 She's pretty much gone now, just a few things left. I think I'll get a pic of the good remaining parts and make a final post. Everyone pause for a moment of silence, while we lay another beloved parts truck to rest! I appreceiate everyone patience, I've been running 4 ways from straight this past week! Mike __________________ hardrock2

10-09-2003, 12:32 AM	#30
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,006	If wild4wheels doesn't want 1 of the sway bars and shipping isn't too expensive to 92055, I would like to buy one or the other __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-10-2003, 05:06 PM	#31
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	RodC: Your vent windows are ready, and I just got the blue center belts all cleaned up. Found two good blue buckle covers, also. GM IRVIN MODEL# SB 692 33 A 71 Look like they will do ya? Shipping for all looks to be $8.00 FedEx ground. Mike Attached Images __________________ hardrock2

10-11-2003, 11:33 PM	#32
Duffy Registered User Join Date: Jan 2001 Location: Billings, MT Posts: 121	BB frame mounts/towers, BB floor heat shield How much for the big block frame mounts and floor heat shield, including shipping to my zip 59106? Interested... Duffy __________________ '72 GMC Sierra Grande Custom Camper

10-12-2003, 01:14 AM	#33
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	jorgensensc, Looks like shipping on the swaybar should be about $14.00 Duffy, Sorry, one guy got all the BB stuff. Just need to get it off/out yet. BB towers and mounts SOLD BB floor heat shield SOLD BB remote P.S. res. SOLD BB dual ex. hangars SOLD Still have the rear end for sale. Anybody want it, and close enough to come pick it up? Mike __________________ hardrock2

10-12-2003, 08:24 AM	#34
chiphayes Registered User Join Date: Jan 2003 Location: indiana Posts: 186	hows the windsheild?and did you sell the vent windows?and window regulators?if not .how much ?were at in illinois are you ?i could drive there and save the shipping.im in indiana,but real close to the ill. line,danville area

10-12-2003, 02:54 PM	#35
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	chiphayes, Windshield isn't cracked, but starting to get cloudy in the corners. Vent windows are SOLD, but I do still have the regulators. $25.00 EA. I might have another good pair of vents, but need to check. Some are in trucks that need to stay "weather tight" for the moment. Winter coming, and all. I'm right at an hour straight West of Terre Haute IN. A little past I-57. It usually takes me about an hour to get to Bryant's Salvage in Danville. Mike __________________ hardrock2

10-12-2003, 08:05 PM	#36
Truckhead 18436572 Join Date: Aug 2003 Location: Waynesboro, Va. Posts: 488	How's the steering column? Is it an automatic column, if so then i could use it. A tilt column would be nice too.

10-12-2003, 08:15 PM	#37
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	truckhead, The auto column is tight. Doesn't appear to have been into. Indicator and fiber-optic (light) are there, shift lever chrome is pitted. Would need cosmetic resto. (paint) $75.00 Mike __________________ hardrock2



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.