1963 K50 1.5 ton 10 hole rims - The 1947 - Present Chevrolet & GMC Truck Message Board Network

palerider · 10-04-2013, 07:36 PM

hello looking for info on locating 6 10 hole 8 3/4 bolt pattern 6 1/4 bore wheels not split rims for 63 chevy napco k50 truck ? I think this is right not sure cant find much info on these old timers anyone got any ideas? 20 inch on now split rims thankx

palerider · 10-06-2013, 09:49 PM

Here's my truck

palerider · 10-06-2013, 09:52 PM

mrolds88 · 10-08-2013, 12:06 PM

Nice truck!!!!

palerider · 10-08-2013, 01:04 PM

22.5 do you think they will clear I think I have found a place that sells them and you can get 10 in wide too. any thoughts???????

**aerotruk63** · 10-08-2013, 08:28 PM

Now that's a daily driver!

bojak · 10-08-2013, 08:51 PM

Just love this truck. Way sharp.

**JPBrecheisen** · 10-24-2013, 12:06 AM

Quote:

Originally Posted by palerider

hello looking for info on locating 6 10 hole 8 3/4 bolt pattern 6 1/4 bore wheels not split rims for 63 chevy napco k50 truck ? I think this is right not sure cant find much info on these old timers anyone got any ideas? 20 inch on now split rims thankx

I am looking for a set as well. I found a place that will make them, but you'll need a deep wallet. They're $335 each. Apparently, the 8-3/4 10 lug bolt pattern was used only with GM medium duties, so wheels with that bolt pattern are going to be scarce. I am also looking since I've been told the RH-5s are dangerous and scary and should be avoided.

Here is some info that might help.

Wheel part number you'll need is 28160. That's an ACCURIDE wheel part number. ACCURIDE no longer makes them, but Wheels Now, Inc does. Their part number is the same only I believe it has a "WN" prefix or something like that.

Here is a link to their website. http://www.wheelsnowinc.com/

I talked to a guy there and he said the catalog has a mistake. The 28160 part number has the following features. R22.5x6.75W 10 LUG on 8-3/4 bolt pattern. The catalog says it has a different bolt pattern, but it actually has the 8-3/4.

Maybe you can find a used set of ACCURIDE wheels out there. There is a C60 in my area that has a full set of the single piece 22.5's but I'm certain the owner would not sell just the wheels to me. I will stop in this week and ask anyway. You never know.

Totally awesome truck BTW.

Not sure if this helps or not.

palerider · 10-24-2013, 07:18 AM

great help thanks nice truck you got too...Pale

OldCreek · 10-24-2013, 11:50 AM

You should make your way over to Stovebolt.com

There's a lot of big trucks and parts over there.

Good luck,

Wil

haminator · 10-24-2013, 08:16 PM

Wouldn't a 19.5 10 hole wheel work or is the circle too small on them?

palerider · 10-24-2013, 08:29 PM

thanks great site

palerider · 10-24-2013, 08:33 PM

not sure Im still trying to put it all together being a 4x4 its a little different I think?? anyway keep me posted Im going custom if have to the electric company truck was moved so I could not get photos it was just what I was lookin for looked like 10 hole 20-22.5s x 10-12 and maybe 44s-46S not sure thanks.

**buggy5872** · 10-25-2013, 09:38 AM

Quote:

Originally Posted by haminator

Wouldn't a 19.5 10 hole wheel work or is the circle too small on them?

Tt should work if it clears the brake drum but there are no tires available that are taller than 34". That truck would not look correct with that small of a tire.

haminator · 10-25-2013, 08:20 PM

Quote:

Originally Posted by buggy5872

Tt should work if it clears the brake drum but there are no tires available that are taller than 34". That truck would not look correct with that small of a tire.

Thats a good point. Man I dig this truck.

Bigasstrux · 03-13-2014, 09:19 PM

Accuride catalog

**michael bustamante** · 03-15-2014, 02:12 AM

Ill look st a couple gm trucks here at the yard for you. Have you looked into shipping these things?

factorystock · 03-22-2014, 03:33 PM

This is the period 22.5" 1 piece wheel to look out for.

10-04-2013, 07:36 PM	#1
palerider Registered User Join Date: Sep 2013 Location: Camel Hump Virginia Posts: 57	1963 K50 1.5 ton 10 hole rims hello looking for info on locating 6 10 hole 8 3/4 bolt pattern 6 1/4 bore wheels not split rims for 63 chevy napco k50 truck ? I think this is right not sure cant find much info on these old timers anyone got any ideas? 20 inch on now split rims thankx Last edited by ETsC10; 10-24-2013 at 10:06 AM. Reason: Removing WTB fom non-subscribing member

10-06-2013, 09:49 PM	#2
palerider Registered User Join Date: Sep 2013 Location: Camel Hump Virginia Posts: 57	Re: 1963 K50 1.5 ton 10 hole rims Here's my truck Last edited by ETsC10; 10-24-2013 at 10:06 AM.

10-06-2013, 09:52 PM	#3
palerider Registered User Join Date: Sep 2013 Location: Camel Hump Virginia Posts: 57	Re: 1963 K50 1.5 ton 10 hole rims

10-08-2013, 12:06 PM	#4
mrolds88 Registered User Join Date: Jul 2011 Location: WV Posts: 946	Re: 1963 K50 1.5 ton 10 hole rims Nice truck!!!! __________________ 72 GMC C2500 402/Th400 first truck (still have) 77 GMC C3500 CC dually Sold 70 C50 dump truck "Rusty" 87 K10 Suburban Sold 93 K2500 xcab 6.5TD 96 GMC K2500 Suburban 6.5 TD

10-08-2013, 01:04 PM	#5
palerider Registered User Join Date: Sep 2013 Location: Camel Hump Virginia Posts: 57	Re: 1963 K50 1.5 ton 10 hole rims 22.5 do you think they will clear I think I have found a place that sells them and you can get 10 in wide too. any thoughts???????

10-08-2013, 08:28 PM	#6
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: 1963 K50 1.5 ton 10 hole rims Now that's a daily driver! __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

10-08-2013, 08:51 PM	#7
bojak Registered User Join Date: Oct 2012 Location: atlanta, GA Posts: 222	Re: 1963 K50 1.5 ton 10 hole rims Just love this truck. Way sharp. Last edited by ETsC10; 10-24-2013 at 10:07 AM.

10-24-2013, 07:18 AM	#9
palerider Registered User Join Date: Sep 2013 Location: Camel Hump Virginia Posts: 57	Re: 1963 K50 1.5 ton 10 hole rims great help thanks nice truck you got too...Pale

10-24-2013, 11:50 AM	#10
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Re: 1963 K50 1.5 ton 10 hole rims You should make your way over to Stovebolt.com There's a lot of big trucks and parts over there. Good luck, Wil __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263

10-24-2013, 08:16 PM	#11
haminator Registered User Join Date: Sep 2009 Location: Prescott Valley AZ Posts: 345	Re: 1963 K50 1.5 ton 10 hole rims Wouldn't a 19.5 10 hole wheel work or is the circle too small on them?

10-24-2013, 08:29 PM	#12
palerider Registered User Join Date: Sep 2013 Location: Camel Hump Virginia Posts: 57	Re: 1963 K50 1.5 ton 10 hole rims thanks great site

10-24-2013, 08:33 PM	#13
palerider Registered User Join Date: Sep 2013 Location: Camel Hump Virginia Posts: 57	Re: 1963 K50 1.5 ton 10 hole rims not sure Im still trying to put it all together being a 4x4 its a little different I think?? anyway keep me posted Im going custom if have to the electric company truck was moved so I could not get photos it was just what I was lookin for looked like 10 hole 20-22.5s x 10-12 and maybe 44s-46S not sure thanks.

03-13-2014, 09:19 PM	#16
Bigasstrux Registered User Join Date: Oct 2009 Location: Salvisa, Ky Posts: 131	Re: 1963 K50 1.5 ton 10 hole rims Accuride catalog Attached Images

03-15-2014, 02:12 AM	#17
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,818	Re: 1963 K50 1.5 ton 10 hole rims Ill look st a couple gm trucks here at the yard for you. Have you looked into shipping these things? __________________ 1967custom

03-22-2014, 03:33 PM	#18
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,356	Re: 1963 K50 1.5 ton 10 hole rims This is the period 22.5" 1 piece wheel to look out for. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.