The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-02-2021, 11:48 AM   #1
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
custom made AD gauges

This is what the original gauge looks like. When I first started doing this I used an 80mph electronic speedo, I now use a 120mph GPS.
First I mark out the speed (For my graphics shop)
then I fit the faceplate
The first thing I do when I receive my $300 gauge is to rip it all apart!
Attached Images
     

Last edited by Rickysnickers; 08-03-2021 at 09:38 AM.
skymangs is offline   Reply With Quote
Old 08-02-2021, 06:46 PM   #2
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

Then I trim for the odometer
put the new decals on
Assemble the speedometer
Attached Images
    
skymangs is offline   Reply With Quote
Old 08-02-2021, 06:53 PM   #3
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

then I start the other side
The only Modification is the 12V to 6V reducer for the fuel gauge
wha La... Here’s the finished gauge
Attached Images
   
skymangs is offline   Reply With Quote
Old 08-02-2021, 06:55 PM   #4
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

Here’s what they look like finished
Attached Images
  
skymangs is offline   Reply With Quote
Old 08-02-2021, 07:02 PM   #5
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

I have just recently switched to a 120mph GPS speedometer. Here’s the proof for the faceplate, and my guy carefully drills through the original faceplate for the button
Attached Images
   
skymangs is offline   Reply With Quote
Old 08-02-2021, 07:34 PM   #6
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,660
Re: custom made AD gauges

nice work! you've have balls of steel for sure
i got nervous tearing into my new $20 volt gauge
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 08-02-2021, 08:22 PM   #7
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

yeah, sometimes that’s what it takes! I do these for some of my customers. At $450 (including labor) it’s a damn affordable gauge option!
skymangs is offline   Reply With Quote
Old 08-02-2021, 09:14 PM   #8
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,557
Re: custom made AD gauges

And it looks great..!!
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 08-02-2021, 09:31 PM   #9
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

Thanks
skymangs is offline   Reply With Quote
Old 08-03-2021, 12:59 PM   #10
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,245
Re: custom made AD gauges

I'm thinking a lot of guys who know these trucks pretty well might miss that at first glance while looking that truck over at a show. About the time you are sitting home on the computer sorting though the photos you took that day you all the sudden spot the 120 mile speedo in a stock looking gauge with a little button going through the glass.
Dang slick for the guys who want that look.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 08-03-2021, 02:51 PM   #11
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

thank you mr48chevy.
skymangs is offline   Reply With Quote
Old 08-03-2021, 10:21 PM   #12
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

The new faceplates will be ready tomorrow, here’s the proof
Attached Images
 
skymangs is offline   Reply With Quote
Old 08-07-2021, 09:22 AM   #13
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

this is what our new gauges look like
Attached Images
   
skymangs is offline   Reply With Quote
Old 08-07-2021, 09:56 PM   #14
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,746
Re: custom made AD gauges

nice work chris!
__________________
the mass of men live lives of quiet desperation


if there is a problem, I can have it.

new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393
joedoh is offline   Reply With Quote
Old 08-08-2021, 10:22 AM   #15
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

thanks joedoh!
skymangs is offline   Reply With Quote
Old 08-11-2021, 06:38 PM   #16
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

We finished with the quad gauge
Here’s the back all wired with the capalaries attached
Here’s the speedometer complete with faceplate
now we didn’t get the speedometer in, I forgot a light socket in my Tahoe. But the quad gauge sure looks great!
Attached Images
     

Last edited by Rickysnickers; 08-11-2021 at 08:20 PM.
skymangs is offline   Reply With Quote
Old 08-12-2021, 09:09 PM   #17
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

Here’s the gauges completely installed
Attached Images
  

Last edited by Rickysnickers; 08-13-2021 at 03:40 PM.
skymangs is offline   Reply With Quote
Old 08-13-2021, 08:55 PM   #18
51 3600
Registered User
 
Join Date: May 2016
Location: Orange Park, FL
Posts: 191
Re: custom made AD gauges

My apologies for this totally off topic question but Skymangs do you have info posted somewhere about mounting a stock steering wheel to what looks like in the pic you posted a aftermarket steering column? If so could you direct me to it. Don't want to hijack this thread anymore than this. Thanks.
__________________
Al

'51 3600, LS5.3, 4L60e, Danforth cross., Blazer front susp., Borg Warner 9 bolt 3.27 GR, Wrangler leafs
51 3600 is offline   Reply With Quote
Old 08-13-2021, 10:49 PM   #19
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

I guess I’ve never posted on how to modify your OG steering wheel to work on a modern column. It’s easy, flip the wheel over and use a flap disk on the backlight to make the base flat. I’ll try to take a pic of what I mean tomorrow.

So you want to use your original steering wheel cause it just looks right. But you can’t figure out how to make your horn work. The reason is simple enough. When that truck was made, the column was energized and the horn was the ground that completed the circuit. Modern columns use the column as a ground and energizes the horn button. So you need to flip-flop it in the horn button. I have never been successful in drilling a used horn ring, they’re just to fragile. So starting with a new horn ring, drill two 3/8” holes about opposite each other. Weld a tab to the bottom then bend the tab through the hole without touching the top plate. Weld a tab through the top plate. The spring wire goes through the other hole, and that wire goes to the tab welded to the bottom plate. The wire from the horn button goes to the tab welded to the top plate.

Attached Images
  
skymangs is offline   Reply With Quote
Old 08-14-2021, 07:31 PM   #20
51 3600
Registered User
 
Join Date: May 2016
Location: Orange Park, FL
Posts: 191
Re: custom made AD gauges

Thanks for that info Skymangs. I'm totally ignorant about the mechanics/electrics of steering columns and wheels no matter old or new. Will have to study what you posted to educate myself. Thanks again.
__________________
Al

'51 3600, LS5.3, 4L60e, Danforth cross., Blazer front susp., Borg Warner 9 bolt 3.27 GR, Wrangler leafs
51 3600 is offline   Reply With Quote
Old 08-14-2021, 08:27 PM   #21
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

I wound up not going to work today. I’ll be there tomorrow for a few hours to take delivery of my next project, (a 50 3600 flatbed, converting to a short box) I’ll take pictures then
skymangs is offline   Reply With Quote
Old 08-17-2021, 01:44 PM   #22
e015475
Registered User
 
e015475's Avatar
 
Join Date: Nov 2013
Location: Show Low, Arizona
Posts: 749
Re: custom made AD gauges

Those gauges look great! Here's my failed/abandoned attempt to do the same thing - maybe you can get some value out of it.

I tried something similar a few years ago with Speedhut guts (I ultimately went back to factory gauges) I had a speedometer and tach and was going to put the oil, gas, charge, temp under the dash.



There was a trophy/award shop in town that made the gauge faces for me out of color coated clear plastic. He had a laser setup to vaporize the colored coating and leave an image on the plastic. Cost about $100 for the initial setup, but every gauge face was about $15 after that. (i hired a CAD guy off of CL to prepare the file of the gauge face - cost about $100 IIRC) The laser also trimmed the plastic and cut the window for the Speedhut digital display.

Here's one ready to attach to the Speedhut speedometer.......


To back-light them I bought a LED light strip and a dimmer off of ebay. I wrapped the LED ribbon around the inside of the OE gauge can. The LEDs could be white, red or blue. Here's the blue one............

e015475 is offline   Reply With Quote
Old 08-17-2021, 02:15 PM   #23
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

What do you mean abandon? They look great!
skymangs is offline   Reply With Quote
Old 08-17-2021, 04:26 PM   #24
e015475
Registered User
 
e015475's Avatar
 
Join Date: Nov 2013
Location: Show Low, Arizona
Posts: 749
Re: custom made AD gauges

I started this gauge project because I was looking for something to do while my truck was in 'paint jail'

The idea was to have a speedometer and tach in the dash and build some metal pods to house the rest of the gauges at the bottom of the dash.

But the 'pods' idea meant more time in 'paint jail' so I decided just go with some original gauges.

I tend to get sucked into these 'science projects' which is why it took me five years to build my '49 GMC
e015475 is offline   Reply With Quote
Old 08-17-2021, 06:38 PM   #25
skymangs
Registered User
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Warrensburg, MO
Posts: 2,690
Re: custom made AD gauges

Very cool! Check out what I did with the gauges in this truck! https://67-72chevytrucks.com/vboard/...=629939&page=2
Post 38
skymangs is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com