75 Dually build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

75Dually · 04-02-2014, 10:42 AM

Quote:

Originally Posted by aggie91

Looks great! I think I would center the wheel at ride height. I do not think it would be off much laid out or raised up...

Karl - That is what I was thinking as well. I am going to move it back to the 1" line and see what that gives me. I will play around with it and see where I get the best results. I will let everyone know where I end up, that way it might help someone in the future doing the same modification.

SCOTI · 04-02-2014, 11:53 AM

Tire size in the pic?

75Dually · 04-02-2014, 12:04 PM

Quote:

Originally Posted by scoti

tire size in the pic?

265/35/22

SCOTI · 04-02-2014, 12:36 PM

Quote:

Originally Posted by 75Dually

265/35/22

Thanks.

SCOTI · 04-02-2014, 01:29 PM

Quote:

Originally Posted by 75Dually

Karl - That is what I was thinking as well. I am going to move it back to the 1" line and see what that gives me. I will play around with it and see where I get the best results. I will let everyone know where I end up, that way it might help someone in the future doing the same modification.

Food for thought.... I think I'd do the 1.25" if feasible since it allows more clearance @ the fan motor. Not as much of a concern if the firewall is shaved but that real-estate is much desired w/the OE stuff (which is already paid for).

75Dually · 04-02-2014, 09:50 PM

Quote:

Originally Posted by SCOTI

Food for thought.... I think I'd do the 1.25" if feasible since it allows more clearance @ the fan motor. Not as much of a concern if the firewall is shaved but that real-estate is much desired w/the OE stuff (which is already paid for).

I will play around with several measurements and see what works best, but thanks for the idea!

04-02-2014, 11:53 AM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,917	Re: 75 Dually build Tire size in the pic? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.