started working on the 65 suburban - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hopped up · 12-05-2011, 02:31 PM

whats parked next to it? badass burb by the way
Posted via Mobile Device

gostranger · 12-05-2011, 02:56 PM

1970 superbird roadrunner thanks!!!!
Posted via Mobile Device

csa daddy · 12-05-2011, 07:21 PM

Dave is the super bird yours or brother I laws either both are extremely cool projects
Posted via Mobile Device

gostranger · 12-05-2011, 08:50 PM

i bought it 26 years ago gave it to my stepfather to put the money into it he passed last year now my mom owns it. i still want to finish it we will see what the future will bring it is a full frame off restoration and it is stock to the t!!!!!!!!!!!!!!!!

csa daddy · 12-06-2011, 11:20 AM

Nice!!
Posted via Mobile Device

kpc01 · 12-07-2011, 10:24 AM

If I remember right you used the PB dropmember. Using this did you have to do any kind of driveshaft tunnel? I am starting to get all my parts together and looking at Zing my frame instead of the dropmember (short on money) but wondering what all buying a drop member will keep me from having to do. I think I'll have to do a little work to the tranny tunnel for the 4L60E but curious how much you had to do overall using the dropmember

gostranger · 12-07-2011, 07:32 PM

HYes i have the porterbuilt cross member.The only thing ihad to do to my tunnel was to change over tothe large hump tranny cover vs the small hump as you look at the motor pics in my build you will notice the engine sits very high i wanted to make sure the engine sits high enough that it doesnt hit the ground when it is layed out i am not positive if you will have clearence with the low hump with the engine in the stock position with the porterbuilt i think you might also the trans tunnel wouldnt be to hard to raise a few inches let me know if you have any other questions.
Posted via Mobile Device

kpc01 · 12-08-2011, 11:49 AM

Thanks for the info...did you modify your tunnel or did you buy one? I'm not sure where to get them at but will probably need to modify mine as well no matter if I Z it or use the dropmember. Did you have to do any mods for the driveshaft or just the trans tunnel?

gostranger · 12-08-2011, 12:10 PM

Quote:

Originally Posted by kpc01

Thanks for the info...did you modify your tunnel or did you buy one? I'm not sure where to get them at but will probably need to modify mine as well no matter if I Z it or use the dropmember. Did you have to do any mods for the driveshaft or just the trans tunnel?

I didnt modify my driveshaft but i have a 2 pc and i have a slip shaft in the rear on so there isnt any binding as far as the tunnel i hooked up with a guy steve almeter 585-314-7907 he deals with used c10 parts also see if anyone on the board has a hi hump setup just dont foget it is 2pcs there is a smaller pc that will have to be cut to make the transition from the firewall to the high hump cover. if you dont get that you will have to fabricat it so to answer your question no modification except changing from low hum to a factory hi hump cover hope this helps let me know if you have any other questions.
Posted via Mobile Device

c.brown · 12-08-2011, 03:36 PM

are you going to cover that front seat or leave it stock,looking great

gostranger · 12-08-2011, 05:17 PM

Quote:

Originally Posted by c.brown

are you going to cover that front seat or leave it stock,looking great

Iamtrying to find a matching one for the passenger side also seatbelts!!!
Posted via Mobile Device

VeronikA · 12-29-2011, 09:49 PM

Wow love your ride homie! Looks dope! I've always loved wagons and trucks. Yours has the attitude

Keep it up homie!!!!!!

gostranger · 12-30-2011, 01:25 PM

Quote:

Originally Posted by VeronikA

Wow love your ride homie! Looks dope! I've always loved wagons and trucks. Yours has the attitude

Keep it up homie!!!!!!

Thanks alot!!

More progress comming i got the compressor in and the rear valves are in just have to get the front in and wired then i will pull it out and get pics and maybe a vidieo of the airride in action i willtell you right now it is super fast!!!!!!!!!!!!!!
Posted via Mobile Device

csa daddy · 12-30-2011, 07:42 PM

VIDEOVIDEOVIDEO Well what's takeing so long I'm waiting
Posted via Mobile Device

csa daddy · 12-30-2011, 07:44 PM

What size line you runnin an valves glad to hear you making progress
Posted via Mobile Device

gostranger · 12-31-2011, 09:16 AM

No video yet want to have the front done and a few other things taken care of before i do one i am running 1/2 inch lines and valves man they are fast!!! And the oasis compressor is super fast! i am impressed! Hope to keep chipping away at it!!!
Posted via Mobile Device

northern 85 · 12-31-2011, 09:28 AM

Luv the burb!

csa daddy · 12-31-2011, 10:06 AM

Right well you will get there I started pulling my a arms apart to paint an install new bushings an ball joints an all. I went to help a friend the other day move a truck to his shop to work on it. An the owner of the truck knocked my trailer loose from the truck an trashed my dads back hatch o. His 01 sub so now I'm out 500 dollars so it will be a little bit before I can do any more to mine
Posted via Mobile Device

gostranger · 12-31-2011, 09:47 PM

Quote:

Originally Posted by northern 85

Luv the burb!

Thanks!!! it has been a long build but it should end up good cant wait to get it a little further along.
Posted via Mobile Device

gostranger · 12-31-2011, 09:49 PM

Quote:

Originally Posted by csa daddy

Right well you will get there I started pulling my a arms apart to paint an install new bushings an ball joints an all. I went to help a friend the other day move a truck to his shop to work on it. An the owner of the truck knocked my trailer loose from the truck an trashed my dads back hatch o. His 01 sub so now I'm out 500 dollars so it will be a little bit before I can do any more to mine
Posted via Mobile Device

That stinks after seeing pics of the damage i hope you are only out 500 bux! good luck!
Posted via Mobile Device

csa daddy · 12-31-2011, 11:30 PM

Thanks me too . Got some work done on the 64 tonite I removed the inner fender an a arms still got to remove the crossmember an install my chopped member an bags with new a arm bushings an ball joints.
Posted via Mobile Device

gostranger · 01-20-2012, 08:08 AM

ok some updates tryed my cold air set up didnt work hood wouldnt close by ablout a quarter inch so i am going to run the filters further out and down to each side.

got all of my custom trim i have a complete set now!!!! i am happy

i also got my 22' rim for the rear will stay with the 20'' in the front

also got the hood hinges all done and working well also rear valves are in and the rear is done also the oasis compressor is hooked up and the 5 gallon tank man the oasis is fast!!!

more to come!!

csa daddy · 01-20-2012, 12:09 PM

Sweet
Posted via Mobile Device

gostranger · 01-20-2012, 01:39 PM

Quote:

Originally Posted by csa daddy

Sweet
Posted via Mobile Device

Thanks!! Making some progress!!
Posted via Mobile Device

csa daddy · 01-20-2012, 02:09 PM

I c if I could just find me a job I could make progress
Posted via Mobile Device

12-05-2011, 02:31 PM	#201
hopped up Registered User Join Date: Jul 2010 Location: los angeles,ca Posts: 3,617	Re: started working on the 65 suburban whats parked next to it? badass burb by the way Posted via Mobile Device

12-05-2011, 02:56 PM	#202
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: started working on the 65 suburban 1970 superbird roadrunner thanks!!!! Posted via Mobile Device

12-05-2011, 07:21 PM	#203
csa daddy Registered User Join Date: May 2005 Location: evington,va Posts: 1,200	Re: started working on the 65 suburban Dave is the super bird yours or brother I laws either both are extremely cool projects Posted via Mobile Device

12-05-2011, 08:50 PM	#204
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: started working on the 65 suburban i bought it 26 years ago gave it to my stepfather to put the money into it he passed last year now my mom owns it. i still want to finish it we will see what the future will bring it is a full frame off restoration and it is stock to the t!!!!!!!!!!!!!!!!

12-06-2011, 11:20 AM	#205
csa daddy Registered User Join Date: May 2005 Location: evington,va Posts: 1,200	Re: started working on the 65 suburban Nice!! Posted via Mobile Device

12-07-2011, 10:24 AM	#206
kpc01 Registered User Join Date: Aug 2011 Location: DFW TX (Oak Point) Posts: 148	Re: started working on the 65 suburban If I remember right you used the PB dropmember. Using this did you have to do any kind of driveshaft tunnel? I am starting to get all my parts together and looking at Zing my frame instead of the dropmember (short on money) but wondering what all buying a drop member will keep me from having to do. I think I'll have to do a little work to the tranny tunnel for the 4L60E but curious how much you had to do overall using the dropmember

12-07-2011, 07:32 PM	#207
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: started working on the 65 suburban HYes i have the porterbuilt cross member.The only thing ihad to do to my tunnel was to change over tothe large hump tranny cover vs the small hump as you look at the motor pics in my build you will notice the engine sits very high i wanted to make sure the engine sits high enough that it doesnt hit the ground when it is layed out i am not positive if you will have clearence with the low hump with the engine in the stock position with the porterbuilt i think you might also the trans tunnel wouldnt be to hard to raise a few inches let me know if you have any other questions. Posted via Mobile Device

12-08-2011, 11:49 AM	#208
kpc01 Registered User Join Date: Aug 2011 Location: DFW TX (Oak Point) Posts: 148	Re: started working on the 65 suburban Thanks for the info...did you modify your tunnel or did you buy one? I'm not sure where to get them at but will probably need to modify mine as well no matter if I Z it or use the dropmember. Did you have to do any mods for the driveshaft or just the trans tunnel?

12-08-2011, 03:36 PM	#210
c.brown Registered User Join Date: Oct 2009 Location: harrison twp MI Posts: 292	Re: started working on the 65 suburban are you going to cover that front seat or leave it stock,looking great __________________ 1966 suburban slammed fuel injected 6.2L My build

12-29-2011, 09:49 PM	#212
VeronikA Registered User Join Date: Dec 2011 Location: Czech Rebublic / Europe Posts: 165	Re: started working on the 65 suburban Wow love your ride homie! Looks dope! I've always loved wagons and trucks. Yours has the attitude Keep it up homie!!!!!!

12-30-2011, 07:42 PM	#214
csa daddy Registered User Join Date: May 2005 Location: evington,va Posts: 1,200	Re: started working on the 65 suburban VIDEOVIDEOVIDEO Well what's takeing so long I'm waiting Posted via Mobile Device

12-30-2011, 07:44 PM	#215
csa daddy Registered User Join Date: May 2005 Location: evington,va Posts: 1,200	Re: started working on the 65 suburban What size line you runnin an valves glad to hear you making progress Posted via Mobile Device

12-31-2011, 09:16 AM	#216
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: started working on the 65 suburban No video yet want to have the front done and a few other things taken care of before i do one i am running 1/2 inch lines and valves man they are fast!!! And the oasis compressor is super fast! i am impressed! Hope to keep chipping away at it!!! Posted via Mobile Device

12-31-2011, 09:28 AM	#217
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: started working on the 65 suburban Luv the burb!

12-31-2011, 10:06 AM	#218
csa daddy Registered User Join Date: May 2005 Location: evington,va Posts: 1,200	Re: started working on the 65 suburban Right well you will get there I started pulling my a arms apart to paint an install new bushings an ball joints an all. I went to help a friend the other day move a truck to his shop to work on it. An the owner of the truck knocked my trailer loose from the truck an trashed my dads back hatch o. His 01 sub so now I'm out 500 dollars so it will be a little bit before I can do any more to mine Posted via Mobile Device



Register or Log In To remove these advertisements.

12-31-2011, 11:30 PM	#221
csa daddy Registered User Join Date: May 2005 Location: evington,va Posts: 1,200	Re: started working on the 65 suburban Thanks me too . Got some work done on the 64 tonite I removed the inner fender an a arms still got to remove the crossmember an install my chopped member an bags with new a arm bushings an ball joints. Posted via Mobile Device

01-20-2012, 08:08 AM	#222
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: started working on the 65 suburban ok some updates tryed my cold air set up didnt work hood wouldnt close by ablout a quarter inch so i am going to run the filters further out and down to each side. got all of my custom trim i have a complete set now!!!! i am happy i also got my 22' rim for the rear will stay with the 20'' in the front also got the hood hinges all done and working well also rear valves are in and the rear is done also the oasis compressor is hooked up and the 5 gallon tank man the oasis is fast!!! more to come!! Attached Images

01-20-2012, 12:09 PM	#223
csa daddy Registered User Join Date: May 2005 Location: evington,va Posts: 1,200	Re: started working on the 65 suburban Sweet Posted via Mobile Device

01-20-2012, 02:09 PM	#225
csa daddy Registered User Join Date: May 2005 Location: evington,va Posts: 1,200	Re: started working on the 65 suburban I c if I could just find me a job I could make progress Posted via Mobile Device

Register or Log In To remove these advertisements.