Holley vs. Edelbrock....the battle of Carbs? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

slam33 · 05-06-2002, 09:48 PM

Too much manifold and too much cam. The carb is right for the motor you have but the whole package is wrong for the street

------------------
71 basic C-10 350. The only option is the rust.No nothing on it, but thats all about to change. <A HREF="http://www.geocities.com/stevemau/slam33page.html?1004806705410

" TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410

</A>

Stroker · 05-06-2002, 10:15 PM

I agree with Slam, the cam is likely the problem. Unless your running 11 or 12 to one compression it is going to be a real pain to drive on the street. Going with a duel plane and smaller carb may help cover up the problem but a smaller cam is the best fix. I don't think you will loose any power dropping back to a cam with seat durations of something like a 268-274. The combo you have now is very mismatched IMO. By the time you start to make some power with that big cam your heads are maxed out. You end up getting the disadvantages of the large cam and none of the benifits. Smaller cam duelplane and your choice of carb and you will be much happier.Just my .02 worth.

Blue68 · 05-07-2002, 10:40 AM

Actually, I believe the Tarantula was an Edelbrock product, not Weiand. It is build for power in the 3500 - 7500 rmp range. A 750 Holley carb is fine for the application. And the combination (750 Holley, Intake and cam) is a great setup for top HP, but the application should be in a bracket racer or a circle track racer. Certainly not a 4000# truck.

tom hand · 05-07-2002, 10:54 AM

How big is that cam? What kind if vacuum are you holding at idle? To me it sounds like your cam is giving you fits. If you went from 72's to 62's on your jets then it sounds like you power valve is staying open. Holleys are easier to tune for a big cam mainly because you can go to any speed shop to get the parts. Edelbrock and Q-jet parts to make them work with a big cam are mainly mail order stuff but ethier one would kick butt when you get it right. GOOD LUCK

------------------
72 GMC Sierra SWB almost finished---- 84 Softail
Olive Branch MS

Stroker · 05-07-2002, 11:21 AM

I don't know exactly what grind he has but I would guess its in the 245-250 deg at .050 range on a 110LSA. Thats a big stick for the street.A good cam for a high winding strip engine with a lot of compression, 4000+ converter,ported heads, open headers and 4.56 gear in a light car. A bottom end that can take 7,000 rpm wouldn't be a bad idea also.

Rabid · 05-07-2002, 12:39 PM

Holley Intake and Holley Carb here.

------------------
72 C-10 Custom Deluxe
LWB, 2WD, 350
700r4, Holley 600
UNITED STATES ARMY - ALASKA

"Rangers lead the way!, Medics bring them back!"

05-06-2002, 09:48 PM	#26
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Too much manifold and too much cam. The carb is right for the motor you have but the whole package is wrong for the street ------------------ 71 basic C-10 350. The only option is the rust.No nothing on it, but thats all about to change. <A HREF="http://www.geocities.com/stevemau/slam33page.html?1004806705410 " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A> __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

05-06-2002, 10:15 PM	#27
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	I agree with Slam, the cam is likely the problem. Unless your running 11 or 12 to one compression it is going to be a real pain to drive on the street. Going with a duel plane and smaller carb may help cover up the problem but a smaller cam is the best fix. I don't think you will loose any power dropping back to a cam with seat durations of something like a 268-274. The combo you have now is very mismatched IMO. By the time you start to make some power with that big cam your heads are maxed out. You end up getting the disadvantages of the large cam and none of the benifits. Smaller cam duelplane and your choice of carb and you will be much happier.Just my .02 worth. __________________ 72 SWB parts and pieces Oklahoma

05-07-2002, 10:40 AM	#28
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	Actually, I believe the Tarantula was an Edelbrock product, not Weiand. It is build for power in the 3500 - 7500 rmp range. A 750 Holley carb is fine for the application. And the combination (750 Holley, Intake and cam) is a great setup for top HP, but the application should be in a bracket racer or a circle track racer. Certainly not a 4000# truck. __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

05-07-2002, 10:54 AM	#29
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	How big is that cam? What kind if vacuum are you holding at idle? To me it sounds like your cam is giving you fits. If you went from 72's to 62's on your jets then it sounds like you power valve is staying open. Holleys are easier to tune for a big cam mainly because you can go to any speed shop to get the parts. Edelbrock and Q-jet parts to make them work with a big cam are mainly mail order stuff but ethier one would kick butt when you get it right. GOOD LUCK ------------------ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

05-07-2002, 11:21 AM	#30
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	I don't know exactly what grind he has but I would guess its in the 245-250 deg at .050 range on a 110LSA. Thats a big stick for the street.A good cam for a high winding strip engine with a lot of compression, 4000+ converter,ported heads, open headers and 4.56 gear in a light car. A bottom end that can take 7,000 rpm wouldn't be a bad idea also. __________________ 72 SWB parts and pieces Oklahoma

05-07-2002, 12:39 PM	#31
Rabid Registered User Join Date: May 2001 Location: Honolulu, HI Posts: 1,237	Holley Intake and Holley Carb here. ------------------ 72 C-10 Custom Deluxe LWB, 2WD, 350 700r4, Holley 600 UNITED STATES ARMY - ALASKA "Rangers lead the way!, Medics bring them back!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.