How much lower is safe? - look - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SilverMachine · 02-20-2018, 05:54 PM

Name: IMG_20180220_151130.jpg
Views: 457
Size: 73.2 KB

Hey guys, i currently have a belltech 3-5 drop on my 86, and ive been thinking about swapping the coils to try to get just a tad lower. im not trying to go as low as possible, cause its my daily driver, but i want to try to get a bit lower!
My only worry is my headers and their clearance. they currently have about 6.2 inches of clearance to the ground.
do you guys think i could get by with 2 inch lowering springs? or should i play it safe and go with 1" lowering springs.
Thanks!

02-20-2018, 05:54 PM	#1
SilverMachine Registered User Join Date: Jun 2016 Location: Indian Trail NC Posts: 49	How much lower is safe? - look Hey guys, i currently have a belltech 3-5 drop on my 86, and ive been thinking about swapping the coils to try to get just a tad lower. im not trying to go as low as possible, cause its my daily driver, but i want to try to get a bit lower! My only worry is my headers and their clearance. they currently have about 6.2 inches of clearance to the ground. do you guys think i could get by with 2 inch lowering springs? or should i play it safe and go with 1" lowering springs. Thanks! Last edited by SilverMachine; 02-20-2018 at 06:01 PM. Reason: add picture



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.