Show off your Wheels - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Northern 52 · 04-01-2019, 03:14 PM

It was tubbed. Here is another shot and also a link to the entire article.

https://www.hotrod.com/articles/1951...-just-a-hobby/

jocww · 04-01-2019, 04:53 PM

Quote:

Originally Posted by youngrodder

20 x 10 mags with 4" of BS.

Marc

Marc, how big are your tubs in the back? I love your truck, when i get to the paint stage my base will be of yours!!

jocww · 04-01-2019, 04:54 PM

Quote:

Originally Posted by Northern 52

It was tubbed. Here is another shot and also a link to the entire article.

https://www.hotrod.com/articles/1951...-just-a-hobby/

damn those are some big tubs

**youngrodder** · 04-09-2019, 09:12 PM

Quote:

Originally Posted by jocww

Marc, how big are your tubs in the back? I love your truck, when i get to the paint stage my base will be of yours!!

Thanks, my tubs are 2 3/4" wide. They are available wider but I wanted to keep them on the small side.

Marc

MiraclePieCo · 04-09-2019, 10:26 PM

Quote:

Originally Posted by joedoh

20x8 and 20x9 mobsteel artillery, 20" trim rings, powdercoated ruby red and modified clip style new GMC caps to fit. my favorite wheelset to date, more trucks in the albums in my profile.

IMG_3096 by Joe Doh, on Flickr

You need to go back to the tire store; they installed your hubcaps upside down

jocww · 04-09-2019, 10:50 PM

Quote:

Originally Posted by youngrodder

Thanks, my tubs are 2 3/4" wide. They are available wider but I wanted to keep them on the small side.

Marc

Who did you go with?

**youngrodder** · 04-10-2019, 09:09 PM

Quote:

Originally Posted by jocww

Who did you go with?

I used

https://www.dennis-carpenter.com/en/trucks/

They are Ford parts......shhhhhh don't tell anyone.

Marc

Kevin Mac · 04-12-2019, 08:53 AM

Intro wheels. 18" on rear and 17" on front.

**mongocanfly** · 04-12-2019, 09:52 AM

Very nice Kevin....

Kevin Mac · 04-12-2019, 11:26 AM

Thanks Greg, I haven't seen any others like them.

**mongocanfly** · 04-12-2019, 11:45 AM

Kevin..The intros are one of 5 choices I have picked out for mine when the day comes..I have my head set on a multi spoke wheel...lts always good to see them actually on a truck...

my56chevytruck · 04-13-2019, 06:01 PM

I looked hard and long for "American made" mag wheels in my price range. No luck, so I went with the set of Rocket Mags to match my truck.

shibbby911 · 04-14-2019, 06:06 PM

Anybody running these style wheel vintiques in a 17? I can’t find pics anywhere.

Von Zipper · 05-11-2019, 01:22 AM

here's my simple 15's

**joedoh** · 05-11-2019, 02:43 AM

thats a beaut, von zipper

Marty68 · 05-13-2019, 09:17 AM

51 gmc.

Marty68 · 05-13-2019, 09:18 AM

larger pic of 52 gmc

59chev · 05-13-2019, 02:50 PM

Quote:

Originally Posted by Von Zipper

here's my simple 15's

Love your truck. It is a big inspiration for my build.

shibbby911 · 05-26-2019, 11:19 PM

Quote:

Originally Posted by OneOffStroker

1995 Corvette ZR1 wheels. I used two sets of front wheels. 17x9.5 -52mm offset. 275/45-17 on all corners. I powder coated them Speedway Grey with Casper Clear topcoat.

Do you know how wide your rear end is? I’m wondering if I can fit 17x9’s without tubbing the bed. My rear end is 62” wide

Johns327 · 05-29-2019, 08:58 PM

Here are my 1976 Cal Chrome 15x10 rear and 15x7 front. Couldn’t afford Cragars when I was a kid so I bought these knock offs. I hit them with some chrome polish but the rust has gotten the better of the fronts. Looked into getting them re-chromed, can buy Cragars for what they wanted. Chrome work is expensive in CA.

**dagnabbitt** · 05-30-2019, 02:22 PM

I wanted my truck to look like something someone would have put together in the seventies. Custom made from Wheel Vintiques: six bolt, 17" chrome rallies with derby caps. Truck sits on a 1997 Tahoe chassis so it has that kind of backspacing.

Driver_WT · 05-31-2019, 07:01 AM

Quote:

Originally Posted by Johns327

Here are my 1976 Cal Chrome 15x10 rear and 15x7 front. Couldn’t afford Cragars when I was a kid so I bought these knock offs. I hit them with some chrome polish but the rust has gotten the better of the fronts. Looked into getting them re-chromed, can buy Cragars for what they wanted. Chrome work is expensive in CA.

Love those 10 inch wheels on the rear. Looks great.

Wade

Simple10 · 05-31-2019, 07:58 AM

.....

OneOffStroker · 05-31-2019, 08:44 AM

Quote:

Originally Posted by shibbby911

Do you know how wide your rear end is? I’m wondering if I can fit 17x9’s without tubbing the bed. My rear end is 62” wide

This is a 4th Gen (93-97) Camaro axle, which should be about 65.5" WMS to WMS. Give or take .5"

My 17x9.5 wheels have a little room to go out (towards fender), but with the huge positive offset, they sit in a little bit, so I cut the bed and will add small tubs. I may reverse this if I change rear end and use different wheels. Long story short, with proper offset/backspace, you should be able to fit a 9" wheel without tubbing.

I 'm probably going to swap to either a 3rd Gen Axle (61.5" WMS-WMS) or a Ferd Exploder 8.8, but shortened 3". I don't know what that width will be, but it'll center the pumpkin and be close to the width of my Jag IFS, so I can run similar backspace front and rear.

PDW HOTRODS · 06-04-2019, 10:27 PM

Name: 5-21-19 039.jpg
Views: 837
Size: 66.3 KB

Name: 3-7-17 016.jpg
Views: 837
Size: 48.2 KB

Riddler 18x8

04-01-2019, 03:14 PM	#226
Northern 52 Registered User Join Date: Sep 2017 Location: Sudbury, Ontario Posts: 42	Re: Show off your Wheels It was tubbed. Here is another shot and also a link to the entire article. https://www.hotrod.com/articles/1951...-just-a-hobby/ Attached Images

04-12-2019, 08:53 AM	#233
Kevin Mac Registered User Join Date: Nov 2016 Location: Central Missouri Posts: 170	Re: Show off your Wheels Intro wheels. 18" on rear and 17" on front. Attached Images

04-12-2019, 09:52 AM	#234
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,588	Re: Show off your Wheels Very nice Kevin.... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

04-12-2019, 11:26 AM	#235
Kevin Mac Registered User Join Date: Nov 2016 Location: Central Missouri Posts: 170	Re: Show off your Wheels Thanks Greg, I haven't seen any others like them.

04-12-2019, 11:45 AM	#236
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,588	Re: Show off your Wheels Kevin..The intros are one of 5 choices I have picked out for mine when the day comes..I have my head set on a multi spoke wheel...lts always good to see them actually on a truck... __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

04-13-2019, 06:01 PM	#237
my56chevytruck Registered User Join Date: Feb 2016 Location: Hebron Posts: 1,128	Re: Show off your Wheels I looked hard and long for "American made" mag wheels in my price range. No luck, so I went with the set of Rocket Mags to match my truck. Attached Images __________________ RUBBER DOWN AND HIT THE ROAD!!! 1940 Ford Dlx Coupe 1969 Mach1

04-14-2019, 06:06 PM	#238
shibbby911 Registered User Join Date: Sep 2012 Location: watauga tx Posts: 63	Re: Show off your Wheels Anybody running these style wheel vintiques in a 17? I can’t find pics anywhere. Attached Images

05-11-2019, 01:22 AM	#239
Von Zipper Registered User Join Date: Feb 2013 Location: los angeles Posts: 10	Re: Show off your Wheels here's my simple 15's Attached Images

05-11-2019, 02:43 AM	#240
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,747	Re: Show off your Wheels thats a beaut, von zipper __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

05-13-2019, 09:17 AM	#241
Marty68 Registered User Join Date: Nov 2014 Location: west coast, Wi Posts: 534	Re: Show off your Wheels 51 gmc. Attached Images

05-13-2019, 09:18 AM	#242
Marty68 Registered User Join Date: Nov 2014 Location: west coast, Wi Posts: 534	Re: Show off your Wheels larger pic of 52 gmc Attached Images

05-29-2019, 08:58 PM	#245
Johns327 Registered User Join Date: Jun 2017 Location: Bonsall, CA Posts: 104	Re: Show off your Wheels Here are my 1976 Cal Chrome 15x10 rear and 15x7 front. Couldn’t afford Cragars when I was a kid so I bought these knock offs. I hit them with some chrome polish but the rust has gotten the better of the fronts. Looked into getting them re-chromed, can buy Cragars for what they wanted. Chrome work is expensive in CA. Attached Images __________________ 1955 second series, 3200 standard bed, big window. Owned since 1975, decided it was time to do a frame off. 327, 4L80e, Ford 9 inch.

05-30-2019, 02:22 PM	#246
dagnabbitt Senior Member Join Date: Dec 2014 Location: Edmonton Alberta Posts: 1,304	Re: Show off your Wheels I wanted my truck to look like something someone would have put together in the seventies. Custom made from Wheel Vintiques: six bolt, 17" chrome rallies with derby caps. Truck sits on a 1997 Tahoe chassis so it has that kind of backspacing. Attached Images __________________ DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10

05-31-2019, 07:58 AM	#248
Simple10 Registered User Join Date: Apr 2019 Location: Australia Posts: 72	Re: Show off your Wheels ..... Attached Images

06-04-2019, 10:27 PM	#250
PDW HOTRODS Registered User Join Date: Nov 2006 Location: Sutherlin Oregon Posts: 493	Re: Show off your Wheels Riddler 18x8



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.