Parting out '72 Custom Deluxe-20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hardrock2 · 10-07-2003, 03:04 AM

I need to bail this one up, and make some more room.

It's pretty rough, but it has a few pieces left that are good.

Runs and drives. Was an original BB truck, now has later 350.

Anyone interested in a 4:11 Dana 60 with POSI?? Coil spring.
$250.00 drum to drum.

Please post here, so I can keep track of who's on first. LOL!

Mike

If I don't get right back to ya, be patient, I'm peddlin' as fast as I can!

71-longbed · 10-07-2003, 03:46 AM

are you parting it out ?? if so could i get a close pic of the headlight bezels ? also looking for a cig lighter

Hardrock2 · 10-07-2003, 03:56 AM

71-longbed,

I can get a pic tomorrow morning.
I'm sure if these aren't real nice, I have a few more sets to pick from. Should have a good lighter or two around, also.

Mike

RodC · 10-07-2003, 08:29 AM

What shape are the vent windows in. I noticed they are chrome. Are the channels rusted?

tripp · 10-07-2003, 08:44 AM

what kind of shape are the hubcaps in? do you have a full set? i'm interested in full set or partial set. let me know how much you want for 'em. thanks.

Solver · 10-07-2003, 09:22 AM

how about the condition of the inner grille and window regulators and the side mirrors if you part it out?
Thanks

**nightmare** · 10-07-2003, 10:13 AM

is that 4.11 posi, 6 lug or 5 lug?

**MJN** · 10-07-2003, 01:10 PM

How wide are those rims on there? Are they 16.5's?

zyggy72 · 10-07-2003, 03:04 PM

Do you have more pics? Pics of interior?

Hardrock2 · 10-07-2003, 07:12 PM

71-longbed: the bezels are pretty decent, with no dings, but they need polished up, the anodizing looks decent, all in all good driver quality bezels. (Pics to come) $10.00 EA.

RodC: vent window chrome about what you would expect for a truck that has sat out most of it's life. Tinted glass, decent rubber, not so good window fuzzies. Light hazing on the chrome.
$40.00 PR.

tripp: Hmmmm, Hubcaps. the only two on it are '73-'76 C-20 style.
(Yellow bowtie) I put them with two more '69-'76 K-20 style fronts I had saved back.
Prefer to sell as set of four for $75.00 Pretty good shape.

Solver: inner grille is cracked, missing a tab or two. $$??
Suprisingly, being an A/C truck, the window regulators are pretty tight, and the drivers side roll nice. (very little slop) The pass side is stiff. I'll have to dig into it to tell more about it. $25.00 EA.
(providing the pass frees up, and works good)

nightmare: The rear end is an 8-lug C-20 coil spring, "Power-Loc"
$250.00 Prefer picked up, don't want to ship it too badly.

MJN: The rims are the wide base "Camper Special" 16.5's.
It has three, and I think I have a fourth around here somewhere.
$25.00 EA. or $80.00 a set.

zyggy72: interior is pretty trashed. Flakey door panels, dash pad and seat are history. Haddecent Med Blue visors, Heat-A/C controls, some A/C ductwork. that's about it! (PIc below)

Bedsides are SOLD
BB fan shroud is SOLD
TH400 I plan to use myself

Hardrock2 · 10-07-2003, 07:23 PM

Solver:
The side mirrors are painted tripod style (short)

If you are interested in chrome (Stainless) ones, I think I can
put together a nice set with all OEM stuff. Let me check.

As I get this booger pulled farther apart, I'll find more good stuff.

BTW, it still has BB dual exhaust hangars on it, BB frame mounts/towers, BB floor heat shield, etc.

Power brake booster just SOLD locally.

Off to the shop to start pullin' it apart!!
Man, I need a 'puter at the shop so I can post as I pick!!

Mike

bad 71 chevy · 10-07-2003, 08:46 PM

how much for the driver fender and the outergrill and shipping to 81303 thanks

chevy_fatman · 10-07-2003, 09:12 PM

How much for the BB frame mounts/towers? If price is right I might be interested.

Hardrock2 · 10-07-2003, 11:57 PM

bad 71:

You probably don't want the fender or outer grille.
They're both pretty rough.
This truck was hit hard in the front when nearly new.
All new front sheetmetal (back then) unfortunately it's had alot of years since to rust.....and rust........and rust!
grille is dinged on top bar.

chevy_fatman: BB frame towers $75.00 set.
I just haven't got it down that far yet.
Hopefully soon!

Mike

stachcold · 10-08-2003, 12:10 AM

What parts of the a\c duct work are there?

zyggy72 · 10-08-2003, 12:17 AM

Is the A/C wiring harness still intact with all the electric switches and relay and stuff?... Even if just most of the harness is still there, I would be interested. How much would you want for it?
Also, how much for the A/C controls?
Thanks
zyggy72

krazy_texan · 10-08-2003, 12:18 AM

man oh man i wish i could buy that posi but i just bought another truck.

Hardrock2 · 10-08-2003, 12:35 AM

A/C controls $35.00 good chrome, levers, lettering. cables are so-so.

A/C parts: good cowl flapper, center floor vent tin, under dash box.
The hard plastic "air manifold/diverter" is good in shape.

The soft plastic "union" between the two is bad, like most, but I might have a good one put up.

Wiring is darned hard to find that hasn't been hacked on, and I don't think this one is going to be an exception! LOL!
If it's too far gone when I get that far into it, I most likely have an A/C harness from a previous victim (truck). I'd have to price it after I look it over.

I have everyone's parts requests so far, and will get this thing
stripped down fairly quick, so bear with me. (I pick through EVERYTHING!!)

Mike

jorgensensc · 10-08-2003, 01:40 AM

If the parts for te ac system aren't all sold individually, ow much for a complete system( I don't know the name for all of the parts, I would trust you to send all of the correct pieces). It wouldn't matter if you peiced together a system from several 'Victims'

Hardrock2 · 10-08-2003, 03:49 AM

I've been thinking about doing that.

I have parted alot of A/C trucks, and have several systems stored away. Some are complete, Some partials. I know I have more than enough to do the next 2 or 3 trucks I have planned.

Mike

**MJN** · 10-08-2003, 09:05 AM

On those rims, how wide are they? I was looking for 9.75" wide rims but if you have four camper specials I might be interested, if I can get them thanks. Shipping might kill me too.

mocwon · 10-08-2003, 03:47 PM

Do you have a set of seat tracks for a bench seat? If so, what condition an price? Thanks

Hardrock2 · 10-08-2003, 07:05 PM

71_longbed:

Bezels and lighter

Bezels have about 3 small "stone" pecks on the lower rim.

Lighter is good, clean, but the black part of the knob needs refinished.

wild4wheels · 10-08-2003, 07:10 PM

front swaybar w/ brackets..price please

TIA

Wild

bad 71 chevy · 10-08-2003, 10:25 PM

how much for an ac setup and shipping to 81303

10-07-2003, 03:04 AM	#1
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	Parting out '72 Custom Deluxe-20 I need to bail this one up, and make some more room. It's pretty rough, but it has a few pieces left that are good. Runs and drives. Was an original BB truck, now has later 350. Anyone interested in a 4:11 Dana 60 with POSI?? Coil spring. $250.00 drum to drum. Please post here, so I can keep track of who's on first. LOL! Mike If I don't get right back to ya, be patient, I'm peddlin' as fast as I can! Attached Images __________________ hardrock2

10-07-2003, 03:46 AM	#2
71-longbed Its Magically Delicious Join Date: Jan 2003 Location: oregon Posts: 2,398	are you parting it out ?? if so could i get a close pic of the headlight bezels ? also looking for a cig lighter __________________ 71 C10 LWB 350sbc -TH350 12 bolt 3.42 Posi Of all my favorite things to do, The utmost is to have a brew. My love grows for my foamy friend, with each thirst-quenching elbow bend. Beer so frosty, smooth, and cold it's paradise pure liquid gold. Yes beer means many things to me that's all for now cus I gotta pee.

10-07-2003, 03:56 AM	#3
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	71-longbed, I can get a pic tomorrow morning. I'm sure if these aren't real nice, I have a few more sets to pick from. Should have a good lighter or two around, also. Mike __________________ hardrock2

10-07-2003, 08:29 AM	#4
RodC Registered User Join Date: Nov 2001 Location: Fairmont WV Posts: 304	What shape are the vent windows in. I noticed they are chrome. Are the channels rusted? __________________ Rod Childers '71 C10 Stepside

10-07-2003, 08:44 AM	#5
tripp Registered User Join Date: Mar 2003 Location: Meansville, Georgia Posts: 218	what kind of shape are the hubcaps in? do you have a full set? i'm interested in full set or partial set. let me know how much you want for 'em. thanks. __________________ 68 SWB Stepside 72 Cheyenne 20 72 SWB Fleetside 72 Suburban 72 2wd Blazer

10-07-2003, 09:22 AM	#6
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	how about the condition of the inner grille and window regulators and the side mirrors if you part it out? Thanks __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

10-07-2003, 01:10 PM	#8
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 2,972	How wide are those rims on there? Are they 16.5's? __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

10-07-2003, 03:04 PM	#9
zyggy72 Can't kick the addiction! Join Date: Jan 2002 Location: Riverton, CT 06065 Posts: 402	Do you have more pics? Pics of interior?

10-07-2003, 07:12 PM	#10
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	71-longbed: the bezels are pretty decent, with no dings, but they need polished up, the anodizing looks decent, all in all good driver quality bezels. (Pics to come) $10.00 EA. RodC: vent window chrome about what you would expect for a truck that has sat out most of it's life. Tinted glass, decent rubber, not so good window fuzzies. Light hazing on the chrome. $40.00 PR. tripp: Hmmmm, Hubcaps. the only two on it are '73-'76 C-20 style. (Yellow bowtie) I put them with two more '69-'76 K-20 style fronts I had saved back. Prefer to sell as set of four for $75.00 Pretty good shape. Solver: inner grille is cracked, missing a tab or two. $$?? Suprisingly, being an A/C truck, the window regulators are pretty tight, and the drivers side roll nice. (very little slop) The pass side is stiff. I'll have to dig into it to tell more about it. $25.00 EA. (providing the pass frees up, and works good) nightmare: The rear end is an 8-lug C-20 coil spring, "Power-Loc" $250.00 Prefer picked up, don't want to ship it too badly. MJN: The rims are the wide base "Camper Special" 16.5's. It has three, and I think I have a fourth around here somewhere. $25.00 EA. or $80.00 a set. zyggy72: interior is pretty trashed. Flakey door panels, dash pad and seat are history. Haddecent Med Blue visors, Heat-A/C controls, some A/C ductwork. that's about it! (PIc below) Bedsides are SOLD BB fan shroud is SOLD TH400 I plan to use myself Attached Images __________________ hardrock2

10-07-2003, 07:23 PM	#11
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	Solver: The side mirrors are painted tripod style (short) If you are interested in chrome (Stainless) ones, I think I can put together a nice set with all OEM stuff. Let me check. As I get this booger pulled farther apart, I'll find more good stuff. BTW, it still has BB dual exhaust hangars on it, BB frame mounts/towers, BB floor heat shield, etc. Power brake booster just SOLD locally. Off to the shop to start pullin' it apart!! Man, I need a 'puter at the shop so I can post as I pick!! Mike __________________ hardrock2

10-07-2003, 08:46 PM	#12
bad 71 chevy Registered User Join Date: Jun 2000 Location: Omaha NE 68122 Posts: 637	how much for the driver fender and the outergrill and shipping to 81303 thanks __________________ 71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers

10-07-2003, 09:12 PM	#13
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	How much for the BB frame mounts/towers? If price is right I might be interested.

10-07-2003, 11:57 PM	#14
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	bad 71: You probably don't want the fender or outer grille. They're both pretty rough. This truck was hit hard in the front when nearly new. All new front sheetmetal (back then) unfortunately it's had alot of years since to rust.....and rust........and rust! grille is dinged on top bar. chevy_fatman: BB frame towers $75.00 set. I just haven't got it down that far yet. Hopefully soon! Mike __________________ hardrock2

10-08-2003, 12:10 AM	#15
stachcold Registered User Join Date: Aug 2003 Location: St. Clair Michigan Posts: 26	What parts of the a\c duct work are there?

10-08-2003, 12:17 AM	#16
zyggy72 Can't kick the addiction! Join Date: Jan 2002 Location: Riverton, CT 06065 Posts: 402	Is the A/C wiring harness still intact with all the electric switches and relay and stuff?... Even if just most of the harness is still there, I would be interested. How much would you want for it? Also, how much for the A/C controls? Thanks zyggy72



Register or Log In To remove these advertisements.

10-08-2003, 12:18 AM	#17
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	man oh man i wish i could buy that posi but i just bought another truck. __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

10-08-2003, 12:35 AM	#18
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	A/C controls $35.00 good chrome, levers, lettering. cables are so-so. A/C parts: good cowl flapper, center floor vent tin, under dash box. The hard plastic "air manifold/diverter" is good in shape. The soft plastic "union" between the two is bad, like most, but I might have a good one put up. Wiring is darned hard to find that hasn't been hacked on, and I don't think this one is going to be an exception! LOL! If it's too far gone when I get that far into it, I most likely have an A/C harness from a previous victim (truck). I'd have to price it after I look it over. I have everyone's parts requests so far, and will get this thing stripped down fairly quick, so bear with me. (I pick through EVERYTHING!!) Mike __________________ hardrock2

10-08-2003, 01:40 AM	#19
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	If the parts for te ac system aren't all sold individually, ow much for a complete system( I don't know the name for all of the parts, I would trust you to send all of the correct pieces). It wouldn't matter if you peiced together a system from several 'Victims' __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

10-08-2003, 03:49 AM	#20
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	I've been thinking about doing that. I have parted alot of A/C trucks, and have several systems stored away. Some are complete, Some partials. I know I have more than enough to do the next 2 or 3 trucks I have planned. Mike __________________ hardrock2

10-08-2003, 09:05 AM	#21
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 2,972	On those rims, how wide are they? I was looking for 9.75" wide rims but if you have four camper specials I might be interested, if I can get them thanks. Shipping might kill me too. Last edited by MJN; 10-08-2003 at 12:52 PM.

10-08-2003, 03:47 PM	#22
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	Parting out '72 Custom Deluxe-20 Do you have a set of seat tracks for a bench seat? If so, what condition an price? Thanks __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

10-08-2003, 07:05 PM	#23
Hardrock2 A$$ deep into trucks Join Date: Dec 2002 Location: Central Illinois,USA Posts: 249	71_longbed: Bezels and lighter Bezels have about 3 small "stone" pecks on the lower rim. Lighter is good, clean, but the black part of the knob needs refinished. Attached Images __________________ hardrock2

10-08-2003, 07:10 PM	#24
wild4wheels Registered User Join Date: Jan 2001 Location: Queen Creek, Arizona Posts: 1,626	front swaybar w/ brackets..price please TIA Wild __________________ Dave aka "Wild" Current truck "Ida Mae" 71 K5 Blazer Former Trucks "Loretta" 71 Longbed (AZ) "Tanya" 69 Stepside (AZ) "Ferdinand" 71 Longhorn (SD) "Patches" 67 Panel (IA/ KY) "Rosita" 68 C30 (KY) Instagram @Wildforwheels @k5_klub @c10university Profile pic provided by Jeff Sundance

10-08-2003, 10:25 PM	#25
bad 71 chevy Registered User Join Date: Jun 2000 Location: Omaha NE 68122 Posts: 637	A/C how much for an ac setup and shipping to 81303 __________________ 71 Chevy C/10 lwb 350 5 speed nv3500 3.73 rear end 2.5" Front Drop and 4" in the back Edelbrock perfomer rpm manifold Edelbrock 600 cfm carb Headmen headers

Register or Log In To remove these advertisements.