69 2WD conv. blazer f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CHEVYE · 02-03-2005, 01:25 AM

i have no time to get going on this truck. it needs the typical stuff (rockers and boxes see pics) the rest of the blazer is in pretty solid shape. it has a single wall top, the hatch is not in very good shape. the windshield is solid all around, as well as the floor. i`m just looking to recover the money i have into it. $600 with title, $550 without, thanks eric.

bagged74 · 02-03-2005, 01:31 AM

you have a pm, where is clarksville exactly?

crews · 02-03-2005, 03:07 AM

Clarksville is on Bus Rt.24 just south of the Tn/ Ky border...Right by Fort Campbell....cool town...lots of car guys( and gals!!)

Blazer1970 · 02-03-2005, 08:12 AM

Converted 4X4? They didn't make a 2WD Blazer in '69. It's tubbed!

Big J · 02-03-2005, 10:22 AM

How bad are the rocker boxes, a little rusty or not there.

JayDubBlazer · 02-03-2005, 12:20 PM

sweet paint to bad i haven't graduated yet

CHEVYE · 02-03-2005, 02:32 PM

sorry for the mis info. i thought some guys would take "convt" as convertible, i actually meant converted.

i will get more pics up when it stops raining. the rocker boxes are there and complete but pretty rusty. it will need rockers and boxes, the bottom of the pass door will need attention also. everything else is very solid on the truck. the rear floor at the tailgate area and around the wells is good. it is a leaf spring rear susp. with a ladder bar type set up on it. the rearend is not narrowed, but it will fit a very fat tire. it has no engine/trans, but whoever might be serious about buying it, i will give them a 305 and th350 for free (305 runs and needs rebuilt, trans worked fine). i just need it out of my way so i can get more done on my swb truck. i also can help with shipping, and might possibly trade for a very nice swb bed, i need a bed for my truck badly. i might also trade for or toward a car hauler/trailer, mine is feeling a little small lately.

i don`t really need the money but just want to get back what i have in it and give someone a new project, if you have any ???`s just put em here or p.m. me, thanks, eric.

**tnblazerk5** · 02-03-2005, 02:42 PM

hey chevye want to trade it for a cuttlass ?

CHEVYE · 02-03-2005, 02:58 PM

i doubt it. carwise, i have 3 running/driving trucks, 2 driving cars, and a motorcycle, not to mention the 2 part trucks out back. the mrs. would choke me to death for bringing another car home.

**tnblazerk5** · 02-03-2005, 03:07 PM

lol yup my wife is kinda raising h#** at me now to get rid of sum cars and trucks too

and i want to drag more in here

**tnblazerk5** · 02-03-2005, 03:20 PM

how soon you got to have the $$$ and can you keep the truck there a while till i find a way to get it here ?

if my wife reads this i am going to get shot

CHEVYE · 02-03-2005, 03:44 PM

if you really want it i would take a small deposit but i hate to hold someone else up that might want it. i can hold it here for any amount of time you need, and could also deliver it. i`ve been to "billsbowtie"`s house a few times and he is in your region.

**tnblazerk5** · 02-03-2005, 03:48 PM

you got a pm

she seen me typing that and said she was going to shot me

she will get over it sooner or later

LUV2XCLR8 · 02-03-2005, 04:31 PM

Quote:

Originally Posted by Blazer1970

It's tubbed!

ERIC YOU DIDN'T TELL ME THIS, I MIGHT HAVE JUMPED ON IT

CHEVYE · 02-03-2005, 04:59 PM

Quote:

Originally Posted by LUV2XCLR8

ERIC YOU DIDN'T TELL ME THIS, I MIGHT HAVE JUMPED ON IT

oh come on now, you know the wife wouldn`t mind you takin it home

. it really would be a cool ride if some effort was put into it, i can`t stand to see it sit, it breaks my heart.

LUV2XCLR8 · 02-03-2005, 05:22 PM

Quote:

Originally Posted by CHEVYE

oh come on now, you know the wife wouldn`t mind you takin it home

. it really would be a cool ride if some effort was put into it, i can`t stand to see it sit, it breaks my heart.

I WOULD LUV 2 HAVE IT, BUT THE BEST I COULD DO IS $400 + PARTS

AND OF COURSE, THERE IS STILL THE MATTER OF BUYING THE "50TH"

CHEVYE · 02-03-2005, 05:38 PM

yeah, if you want the 50th go for it. if you want the blazer, let me know what kind of parts ya got. i could deliver it to your door for an extra $100.

meathead95 · 02-03-2005, 06:18 PM

i cant believe this isnt sold yet if it wasnt tubbed it would be in my driveway. ttt for yah

LUV2XCLR8 · 02-03-2005, 06:31 PM

Quote:

Originally Posted by meathead95

i cant believe this isnt sold yet if it wasnt tubbed it would be in my driveway. ttt for yah

THAT'S THE REASON I LUV IT, IT'S CONVERTED, SO WHY NOT TUB THE HELL OUT OF IT

CHEVYE · 02-03-2005, 06:39 PM

Quote:

Originally Posted by LUV2XCLR8

THAT'S THE REASON I LUV IT, IT'S CONVERTED, SO WHY NOT TUB THE HELL OUT OF IT

me too.

meathead95 · 02-03-2005, 06:39 PM

kids cant ride in the back seat if it wont fit

CHEVYE · 02-03-2005, 06:48 PM

Quote:

Originally Posted by meathead95

kids cant ride in the back seat if it wont fit

ya got a good point there.

LUV2XCLR8 · 02-03-2005, 07:37 PM

Quote:

Originally Posted by CHEVYE

ya got a good point there.

BUT I WOULD MAKE IT A PRO STREET TOY

*Gee_Emm* · 02-03-2005, 07:37 PM

Are you sure that is a 69? The tub looks like a 72 to me. Are you guys stupid or something, it has been up for sale for almost 24 hours and no one has bought it?

LUV2XCLR8 · 02-03-2005, 07:43 PM

Quote:

Originally Posted by Gee_Emm

Are you guys stupid or something, it has been up for sale for almost 24 hours and no one has bought it?

HEY NOW, I GREATLY RESEMBLE THAT REMARK

I DON'T HAVE $600, SOMEBODY'S GET'N A STEAL, IMHO

02-03-2005, 01:25 AM	#1
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	69 2WD conv. blazer f/s i have no time to get going on this truck. it needs the typical stuff (rockers and boxes see pics) the rest of the blazer is in pretty solid shape. it has a single wall top, the hatch is not in very good shape. the windshield is solid all around, as well as the floor. i`m just looking to recover the money i have into it. $600 with title, $550 without, thanks eric. Attached Images __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

02-03-2005, 03:07 AM	#3
crews It just doesn't matter Join Date: Apr 2001 Location: Huntington Beach, Ca Posts: 1,660	Clarksville is on Bus Rt.24 just south of the Tn/ Ky border...Right by Fort Campbell....cool town...lots of car guys( and gals!!) __________________ 05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!!

02-03-2005, 08:12 AM	#4
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,510	Converted 4X4? They didn't make a 2WD Blazer in '69. It's tubbed! __________________ Tim

02-03-2005, 10:22 AM	#5
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	How bad are the rocker boxes, a little rusty or not there. __________________ BAZINGA! My Build

02-03-2005, 12:20 PM	#6
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	sweet paint to bad i haven't graduated yet __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

02-03-2005, 01:31 AM	#2
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	you have a pm, where is clarksville exactly?

02-03-2005, 02:32 PM	#7
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	sorry for the mis info. i thought some guys would take "convt" as convertible, i actually meant converted. i will get more pics up when it stops raining. the rocker boxes are there and complete but pretty rusty. it will need rockers and boxes, the bottom of the pass door will need attention also. everything else is very solid on the truck. the rear floor at the tailgate area and around the wells is good. it is a leaf spring rear susp. with a ladder bar type set up on it. the rearend is not narrowed, but it will fit a very fat tire. it has no engine/trans, but whoever might be serious about buying it, i will give them a 305 and th350 for free (305 runs and needs rebuilt, trans worked fine). i just need it out of my way so i can get more done on my swb truck. i also can help with shipping, and might possibly trade for a very nice swb bed, i need a bed for my truck badly. i might also trade for or toward a car hauler/trailer, mine is feeling a little small lately. i don`t really need the money but just want to get back what i have in it and give someone a new project, if you have any ???`s just put em here or p.m. me, thanks, eric. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback Last edited by CHEVYE; 02-03-2005 at 02:39 PM.

02-03-2005, 02:42 PM	#8
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	hey chevye want to trade it for a cuttlass ?

02-03-2005, 02:58 PM	#9
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	i doubt it. carwise, i have 3 running/driving trucks, 2 driving cars, and a motorcycle, not to mention the 2 part trucks out back. the mrs. would choke me to death for bringing another car home. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

02-03-2005, 03:07 PM	#10
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	lol yup my wife is kinda raising h#** at me now to get rid of sum cars and trucks too and i want to drag more in here

02-03-2005, 03:20 PM	#11
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	how soon you got to have the $$$ and can you keep the truck there a while till i find a way to get it here ? if my wife reads this i am going to get shot

02-03-2005, 03:44 PM	#12
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	if you really want it i would take a small deposit but i hate to hold someone else up that might want it. i can hold it here for any amount of time you need, and could also deliver it. i`ve been to "billsbowtie"`s house a few times and he is in your region. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

02-03-2005, 03:48 PM	#13
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	you got a pm she seen me typing that and said she was going to shot me she will get over it sooner or later Last edited by tnblazerk5; 02-03-2005 at 03:54 PM.

02-03-2005, 05:38 PM	#17
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	yeah, if you want the 50th go for it. if you want the blazer, let me know what kind of parts ya got. i could deliver it to your door for an extra $100. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

02-03-2005, 06:18 PM	#18
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	i cant believe this isnt sold yet if it wasnt tubbed it would be in my driveway. ttt for yah __________________ 72 2wd blazer 72 swb 4x4



Register or Log In To remove these advertisements.

02-03-2005, 06:39 PM	#21
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	kids cant ride in the back seat if it wont fit __________________ 72 2wd blazer 72 swb 4x4

02-03-2005, 07:37 PM	#24
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Are you sure that is a 69? The tub looks like a 72 to me. Are you guys stupid or something, it has been up for sale for almost 24 hours and no one has bought it?

Register or Log In To remove these advertisements.