Goodguys 2015 Giveaway C10 by Scott's Hotrods - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bomp · 12-25-2013, 01:18 PM

Over the top

blake's first · 12-25-2013, 02:09 PM

I was sure that you guys were going to be right on with the suspension so nice to see the wheels straight up and down and with out the arms not on bad upward angles maybe it will catch on thanks to you and the roadster shop these trucks are going to get the same attention as street rods

BurlyCrew · 12-25-2013, 03:17 PM

What was the reason to remove the inner cab skin, just for thorough rust removal/repair/metal sealing, etc??

tech@scottshotrods · 12-26-2013, 10:56 AM

Quote:

Originally Posted by BurlyCrew

What was the reason to remove the inner cab skin, just for thorough rust removal/repair/metal sealing, etc??

At first glance we could tell there was some rust hiding away in there. We pulled it out to make sure that when it was blasted, all of the questionable metal was addressed. And it was a good thing we did too since once we pulled it out we could see just how much hidden rust was sleeping away in there.

hopped up · 12-26-2013, 11:27 AM

Great work! Soo nice! What's with the chopped burban

tech@scottshotrods · 12-26-2013, 12:01 PM

Quote:

Originally Posted by hopped up

What's with the chopped burban

It's the bosses truck. We've just been to slammed with customer work to finish it up.

nibs · 12-26-2013, 02:37 PM

Wow that engine makes my pant a little tight. What kind of numbers are expected from it?

Scottshotrods · 12-26-2013, 03:10 PM

Motor is 565hp
torque is 500 ft lbs

Plenty to get around the track

Justin

nibs · 12-26-2013, 04:27 PM

Yea, that should be plenty!

98L150 · 12-26-2013, 04:29 PM

following this one

TexasLS1 · 12-26-2013, 05:03 PM

Whoa.... I'm getting in to watch this too. Nice work as usual!!

tech@scottshotrods · 12-26-2013, 06:27 PM

No updates, just really like the way the truck looks from this angle.

PBFAB.COM · 12-26-2013, 07:25 PM

I'm digging the belt line in the firewall and the new rear cab panel. Gonna look sharp!

GEARBOXGARAGE · 12-27-2013, 12:34 PM

What are the wheels that you have mocked up on there?

Scottshotrods · 12-27-2013, 01:21 PM

Quote:

Originally Posted by GEARBOXGARAGE

What are the wheels that you have mocked up on there?

The wheels that are mocked up on the truck are made by Billet Specialties
Patriot pro touring series

Justin

HSRACER · 12-28-2013, 07:34 PM

Signin up for the ride.

**jkeating1** · 12-29-2013, 05:47 PM

Subscribed!

Low Elco · 12-29-2013, 09:00 PM

Nice tight work. Can't wait for the next update!

Chvy2NV · 12-29-2013, 11:13 PM

amazing work.. keep the progress pics coming.

tech@scottshotrods · 01-02-2014, 03:34 PM

Right now the guys are setting up the ground clearance. The rockers are being trimmed and remade, ad the rear of the cab is being redone too.

You can see just how much we are taking out of the rocker. Seems like a lot, but it'll really not be noticeable when it's all finished.

tech@scottshotrods · 01-02-2014, 05:42 PM

The body will sit level with the frame when it's finished. All said and done, it will give us our 4" of ground clearance that we need.

Here's a better view of the rocker. It'll be finished with a sheet metal cap and shaped correctly.

aggie91 · 01-02-2014, 09:48 PM

Looking Good!

Hardesty454 · 01-02-2014, 10:01 PM

Some killer metal work so far! Doing some good work here.

jmedero · 01-03-2014, 12:01 AM

That has to be the cleanest shop floor I've seen. Looking good justin.

Rusbuilt · 01-03-2014, 08:53 AM

Wow!

12-25-2013, 01:18 PM	#76
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods Over the top

12-25-2013, 02:09 PM	#77
blake's first Registered User Join Date: Mar 2013 Location: Herald cal. Posts: 243	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods I was sure that you guys were going to be right on with the suspension so nice to see the wheels straight up and down and with out the arms not on bad upward angles maybe it will catch on thanks to you and the roadster shop these trucks are going to get the same attention as street rods

12-25-2013, 03:17 PM	#78
BurlyCrew Registered User Join Date: Feb 2013 Location: Southern Oregon Posts: 78	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods What was the reason to remove the inner cab skin, just for thorough rust removal/repair/metal sealing, etc??

12-26-2013, 11:27 AM	#80
hopped up Registered User Join Date: Jul 2010 Location: los angeles,ca Posts: 3,617	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods Great work! Soo nice! What's with the chopped burban

12-26-2013, 02:37 PM	#82
nibs JRods Garage Join Date: Dec 2009 Location: East Highland, CA Posts: 1,098	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods Wow that engine makes my pant a little tight. What kind of numbers are expected from it? __________________ Orange Julius-My dropmember'd, LS'd, SWB street machine...

12-26-2013, 03:10 PM	#83
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods Motor is 565hp torque is 500 ft lbs Plenty to get around the track Justin

12-26-2013, 04:27 PM	#84
nibs JRods Garage Join Date: Dec 2009 Location: East Highland, CA Posts: 1,098	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods Yea, that should be plenty! __________________ Orange Julius-My dropmember'd, LS'd, SWB street machine...

12-26-2013, 04:29 PM	#85
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods following this one __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

12-26-2013, 05:03 PM	#86
TexasLS1 Registered User Join Date: Jul 2012 Location: Jonestown, TX Posts: 469	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods Whoa.... I'm getting in to watch this too. Nice work as usual!!

12-26-2013, 06:27 PM	#87
tech@scottshotrods Registered User Join Date: Nov 2010 Location: california Posts: 631	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods No updates, just really like the way the truck looks from this angle.

12-26-2013, 07:25 PM	#88
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods I'm digging the belt line in the firewall and the new rear cab panel. Gonna look sharp! __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

12-27-2013, 12:34 PM	#89
GEARBOXGARAGE Registered User Join Date: Sep 2011 Location: Sturgis, Michigan Posts: 509	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods What are the wheels that you have mocked up on there?

12-28-2013, 07:34 PM	#91
HSRACER Registered User Join Date: Sep 2007 Location: Katy TX Posts: 1,268	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods Signin up for the ride. __________________ HSRACER Slammed 53 5 window Blown/Bagged 54 Pickup Patinaed 67 LS stepside Supercharged 67 Nova Bagged 69 Suburban Turbo'ed 5.3 LS

12-29-2013, 05:47 PM	#92
jkeating1 Senior Member Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods Subscribed! __________________ JK

12-29-2013, 09:00 PM	#93
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods Nice tight work. Can't wait for the next update! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!



Register or Log In To remove these advertisements.

12-29-2013, 11:13 PM	#94
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods amazing work.. keep the progress pics coming.

01-02-2014, 03:34 PM	#95
tech@scottshotrods Registered User Join Date: Nov 2010 Location: california Posts: 631	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods Right now the guys are setting up the ground clearance. The rockers are being trimmed and remade, ad the rear of the cab is being redone too. You can see just how much we are taking out of the rocker. Seems like a lot, but it'll really not be noticeable when it's all finished.

01-02-2014, 05:42 PM	#96
tech@scottshotrods Registered User Join Date: Nov 2010 Location: california Posts: 631	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods The body will sit level with the frame when it's finished. All said and done, it will give us our 4" of ground clearance that we need. Here's a better view of the rocker. It'll be finished with a sheet metal cap and shaped correctly. Last edited by tech@scottshotrods; 01-02-2014 at 05:58 PM.

01-02-2014, 09:48 PM	#97
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods Looking Good! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-02-2014, 10:01 PM	#98
Hardesty454 Registered User Join Date: Feb 2011 Location: Riverbank, Ca Posts: 1,006	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods Some killer metal work so far! Doing some good work here. __________________ Rob 1971 c10 - ground up in progress Tripp's Speed Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=589750

01-03-2014, 12:01 AM	#99
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods That has to be the cleanest shop floor I've seen. Looking good justin. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-03-2014, 08:53 AM	#100
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Goodguys 2015 Giveaway C10 by Scott's Hotrods Wow! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

Register or Log In To remove these advertisements.