Boyd Welding-67-72 Rear Mount Aluminum Tank - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1970 CST STEP · 08-11-2011, 09:32 PM

Need non EFI tank! GROUP BUY, GROUP BUY!!!!!!!!!!!!!!!!!!!!!!

**Daveboyd** · 08-12-2011, 08:28 PM

Ok you guys twisted my arm... I will get the details together on this years final group buy.

everyone chime in and let me know how many tanks to expect and what type, EFI or NON EFI so we can start preparing production and getting the supplies on their way.

i am going to go back through this forum and take a look at all of the prices we have offered. I will try to break the record lowest price.

creepdogg · 08-12-2011, 08:48 PM

Quote:

Originally Posted by Daveboyd

Ok you guys twisted my arm... I will get the details together on this years final group buy.

everyone chime in and let me know how many tanks to expect and what type, EFI or NON EFI so we can start preparing production and getting the supplies on their way.

i am going to go back through this forum and take a look at all of the prices we have offered. I will try to break the record lowest price.

WOOT!!
Count me in for a Non EFI, center fill

Shooters_7 · 08-27-2011, 11:25 AM

Quote:

Originally Posted by Daveboyd

Ok you guys twisted my arm... I will get the details together on this years final group buy.

everyone chime in and let me know how many tanks to expect and what type, EFI or NON EFI so we can start preparing production and getting the supplies on their way.

i am going to go back through this forum and take a look at all of the prices we have offered. I will try to break the record lowest price.

Just got back from Iraq and need a EFI, in bed fill tank and in tank fuel pump option as I'll be running an LS1. The truck is a 1966 C10 SWB. Thanks

2wd73blazer · 08-12-2011, 11:41 PM

I need a efi.

stoich · 08-13-2011, 12:01 AM

I'm down for an EFI tank for long bed fleetside with wood bed. I read most of this thread (might have missed it), but was anything figured out with the fill location to be centered in one of the wide planks?

texastrendz · 08-13-2011, 12:32 AM

Need a EFI version

automagic67 · 08-13-2011, 03:30 PM

I need an EFI tank too.

shearjs · 08-15-2011, 08:44 AM

Sweet! I need an EFI tank also. Thanks!

stevess11 · 08-23-2011, 10:30 PM

im in for a non efi. woodbed floor fill

mighty_mike015 · 08-24-2011, 07:33 AM

Possibly interested in an efi tank, side fill.

mac · 08-26-2011, 10:00 PM

Dave - I'm in for a non-efi, bed fill, ROV and 90 ohm sender set-up. Let me know when you're ready to pull the trigger. Mac

Timbo1 · 08-28-2011, 03:18 PM

needing a non efi tank.

c10seconds · 08-28-2011, 04:18 PM

EFI Tank for me
Posted via Mobile Device

funkytechmonkey · 08-28-2011, 06:17 PM

Wish I would have waited for this group buy... Finally got mine installed and its pretty incredible. Looks great...fit great...easy to install. I give them an A+ on it!!

creepdogg · 08-28-2011, 10:56 PM

Quote:

Originally Posted by funkytechmonkey

Wish I would have waited for this group buy... Finally got mine installed and its pretty incredible. Looks great...fit great...easy to install. I give them an A+ on it!!

I see you are running the PB rear tubular crossmembers, did you need to specially order your tank or is that the standard dimensions?

**Clyde65** · 08-28-2011, 10:20 PM

That looks real good Brian, it is so temping to get one of these....must resist...

funkytechmonkey · 08-28-2011, 11:27 PM

It was standard.... Matches up perfect

stoich · 09-01-2011, 11:16 AM

Any updates? The big announcement is supposed to be today. Just waiting for the details and I'm ready to order an EFI tank for fleetside with bed fill. Been waiting foreverrrrrrrr......

Timbo1 · 09-01-2011, 11:20 AM

Waiting also, could use it ASAP. Hope is is soon!!!!

**Daveboyd** · 09-01-2011, 12:42 PM

Well i can launch this anytime and we can build as many tanks as we need. I wont be able to supply the fuel level sending units because of supply problems. i have ordered 150 senders and i will have 20 by the 17th which are already accounted for in production. the rest will be 60 days out.

If everyone is ok with sourcing their own sender I will launch it today.

Timbo1 · 09-01-2011, 12:48 PM

Launch Away !!!!!!

funkytechmonkey · 09-01-2011, 08:44 PM

Pppsshhhhh.... Wish I would have waited for this deal. I should buy a second one just to have it for my next build 3 years down the road.

**Daveboyd** · 09-01-2011, 08:47 PM

Quote:

Originally Posted by funkytechmonkey

Pppsshhhhh.... Wish I would have waited for this deal. I should buy a second one just to have it for my next build 3 years down the road.

I did see there were 1 or 2 orders that were placed today. I will be applying this group buy price to those when i get in the office tomorrow morning.

funkytechmonkey · 09-01-2011, 09:23 PM

Dave... I bought mine a few months ago, already installed it and love it. There are some pics if you scroll up. Thanks for the good work!!

08-11-2011, 09:32 PM	#1
1970 CST STEP Registered User Join Date: Nov 2010 Location: Bandera, TX Posts: 85	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Need non EFI tank! GROUP BUY, GROUP BUY!!!!!!!!!!!!!!!!!!!!!! __________________ 1967 SWB (small window) original 1970 4x4 STEP 1970 CST SWB FLEET 1972 SWB FLEET ORIGINAL

08-12-2011, 08:28 PM	#2
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Ok you guys twisted my arm... I will get the details together on this years final group buy. everyone chime in and let me know how many tanks to expect and what type, EFI or NON EFI so we can start preparing production and getting the supplies on their way. i am going to go back through this forum and take a look at all of the prices we have offered. I will try to break the record lowest price. __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

08-12-2011, 11:41 PM	#5
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I need a efi.

08-13-2011, 12:01 AM	#6
stoich Registered User Join Date: May 2010 Location: Tucson, AZ Posts: 5	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'm down for an EFI tank for long bed fleetside with wood bed. I read most of this thread (might have missed it), but was anything figured out with the fill location to be centered in one of the wide planks? __________________ 72 Fleetside longbed...97 Z-28 full electronic powertrain (LT1 350/4L60E) powertrain tuned by Bryan Herter (366 RWHP/348TQ). Wood bed with rear leaf spring suspension.

08-13-2011, 12:32 AM	#7
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Need a EFI version

08-13-2011, 03:30 PM	#8
automagic67 Registered User Join Date: Apr 2007 Location: Las Vegas Nv Posts: 21	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I need an EFI tank too.

08-15-2011, 08:44 AM	#9
shearjs Registered User Join Date: Mar 2011 Location: Thompsons Station, TN Posts: 700	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Sweet! I need an EFI tank also. Thanks! __________________ -Jason '72 Family Hauler Rufus' Restoration - 70 GMC, LS swap - SOLD

08-23-2011, 10:30 PM	#10
stevess11 Registered User Join Date: Aug 2004 Location: sedalia mo Posts: 77	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank im in for a non efi. woodbed floor fill

08-24-2011, 07:33 AM	#11
mighty_mike015 Registered User Join Date: Jan 2009 Location: Southern Indiana Posts: 63	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Possibly interested in an efi tank, side fill.

08-26-2011, 10:00 PM	#12
mac Active Member Join Date: Jan 2005 Location: Spokane WA Posts: 166	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave - I'm in for a non-efi, bed fill, ROV and 90 ohm sender set-up. Let me know when you're ready to pull the trigger. Mac

08-28-2011, 03:18 PM	#13
Timbo1 Registered User Join Date: Apr 2011 Location: Gilbert Az Posts: 260	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank needing a non efi tank.

08-28-2011, 04:18 PM	#14
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank EFI Tank for me Posted via Mobile Device

08-28-2011, 06:17 PM	#15
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Wish I would have waited for this group buy... Finally got mine installed and its pretty incredible. Looks great...fit great...easy to install. I give them an A+ on it!! __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

08-28-2011, 10:20 PM	#17
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank That looks real good Brian, it is so temping to get one of these....must resist... __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

08-28-2011, 11:27 PM	#18
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank It was standard.... Matches up perfect __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build



Register or Log In To remove these advertisements.

09-01-2011, 11:16 AM	#19
stoich Registered User Join Date: May 2010 Location: Tucson, AZ Posts: 5	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Any updates? The big announcement is supposed to be today. Just waiting for the details and I'm ready to order an EFI tank for fleetside with bed fill. Been waiting foreverrrrrrrr...... __________________ 72 Fleetside longbed...97 Z-28 full electronic powertrain (LT1 350/4L60E) powertrain tuned by Bryan Herter (366 RWHP/348TQ). Wood bed with rear leaf spring suspension.

09-01-2011, 11:20 AM	#20
Timbo1 Registered User Join Date: Apr 2011 Location: Gilbert Az Posts: 260	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Waiting also, could use it ASAP. Hope is is soon!!!!

09-01-2011, 12:42 PM	#21
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Well i can launch this anytime and we can build as many tanks as we need. I wont be able to supply the fuel level sending units because of supply problems. i have ordered 150 senders and i will have 20 by the 17th which are already accounted for in production. the rest will be 60 days out. If everyone is ok with sourcing their own sender I will launch it today. __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

09-01-2011, 12:48 PM	#22
Timbo1 Registered User Join Date: Apr 2011 Location: Gilbert Az Posts: 260	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Launch Away !!!!!!

09-01-2011, 08:44 PM	#23
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Pppsshhhhh.... Wish I would have waited for this deal. I should buy a second one just to have it for my next build 3 years down the road. __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

09-01-2011, 09:23 PM	#25
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave... I bought mine a few months ago, already installed it and love it. There are some pics if you scroll up. Thanks for the good work!! __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

Register or Log In To remove these advertisements.