MOOG Disapointment - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 06-22-2021, 01:43 PM

Were the parts from the 'Problem Solver' line or their standard replacement stuff? There's a difference in warranty between the 2 so if they're the Problem Solver line it's worth inquiring.

67C10Step · 06-22-2021, 02:08 PM

Quote:

Originally Posted by SCOTI

Were the parts from the 'Problem Solver' line or their standard replacement stuff? There's a difference in warranty between the 2 so if they're the Problem Solver line it's worth inquiring.

I honestly do not remember but will go back through my records to see. Digging back through my photos I am not thinking the install was about September last year.

SCOTI · 06-22-2021, 02:28 PM

Quote:

Originally Posted by 67C10Step

I honestly do not remember but will go back through my records to see. Digging back through my photos I am not thinking the install was about September last year.

The standard series parts have a limited warranty & I believe they have an 'R/K' in the part number description where the 'Problem Solver' line has that in the part ID/descriptions.

67C10Step · 06-22-2021, 03:04 PM

Quote:

Originally Posted by SCOTI

The standard series parts have a limited warranty & I believe they have an 'R/K' in the part number description where the 'Problem Solver' line has that in the part ID/descriptions.

Went and checked my records. Mine were the Problem Solver series of parts. I will take some photos and send them to MOOG just to see what response I get.

**Grumpy old man** · 06-22-2021, 03:35 PM

This might help . I'll have to check mine also .

https://www.moogparts.com/parts/susp...SAAEgK0KvD_BwE

52napco · 06-22-2021, 03:40 PM

The problem is MADE IN CHINA...you are paying for the name

67C10Step · 06-22-2021, 04:11 PM

Quote:

Originally Posted by 52napco

The problem is MADE IN CHINA...you are paying for the name

Not to be obtuse but these are the sort of comments online that drive me nuts. Can you provide some alternatives to Moog that you have used and would recommend? This is, for the most part, a helpful community of people with a common interest. I’ve gotten a lot of help on this board and this thread should be helpful to some as that is the reason I started it.

06-22-2021, 01:43 PM	#1
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,923	Re: MOOG Disapointment Were the parts from the 'Problem Solver' line or their standard replacement stuff? There's a difference in warranty between the 2 so if they're the Problem Solver line it's worth inquiring. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

06-22-2021, 03:35 PM	#5
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: MOOG Disapointment This might help . I'll have to check mine also . https://www.moogparts.com/parts/susp...SAAEgK0KvD_BwE __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

06-22-2021, 03:40 PM	#6
52napco Registered User Join Date: Jun 2014 Location: upstate sc Posts: 2,095	Re: MOOG Disapointment The problem is MADE IN CHINA...you are paying for the name



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.