6.0 Swap Stumbling Idle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rich84 · 05-10-2018, 08:58 AM

I have a 2004 Van 6.0 that I put in a 1986 longbed..Idles smooth until you rev the motor. As it decreases idle it stumbles as it idles down.
Exhaust is a little leaky it is just kind of patched together so I can get it to the exhaust shop.
It has 2 codes 135, and 155 for the o2 sensors. If I unplug the MAF it runs and idles perfectly.
Is this happening because of the small leaks in the exhaust? Vacuum leak?

05-10-2018, 08:58 AM	#1
Rich84 Registered User Join Date: Mar 2012 Location: Woodbury, Ct. Posts: 1,664	6.0 Swap Stumbling Idle I have a 2004 Van 6.0 that I put in a 1986 longbed..Idles smooth until you rev the motor. As it decreases idle it stumbles as it idles down. Exhaust is a little leaky it is just kind of patched together so I can get it to the exhaust shop. It has 2 codes 135, and 155 for the o2 sensors. If I unplug the MAF it runs and idles perfectly. Is this happening because of the small leaks in the exhaust? Vacuum leak?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.