Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
01-21-2011, 09:51 AM | #1 | |
Senior Member
Join Date: Mar 2000
Location: Rockville,In. USA
Posts: 3,718
|
Re: GMC paul door seals are great!
Quote:
Paul @ GMCPauls |
|
01-21-2011, 10:06 AM | #2 |
Senior Member
Join Date: Apr 2010
Location: St.Peters, MO
Posts: 2,226
|
Re: GMC paul door seals are great!
This type of seal sounds almost too good to be true! I tried to find them on GMC Paul's web site but it just listed the original style seal, unless I missed it. How much did a set cost?
|
01-21-2011, 10:09 AM | #3 |
67cheby
Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: GMC paul door seals are great!
if i am not mistaken mine were $49.95
|
01-21-2011, 10:24 AM | #4 |
Registered User
Join Date: Jul 2000
Location: Victoria,BC, Canada
Posts: 1,300
|
Re: GMC paul door seals are great!
Don't worry if GMC pauls doesn't ship to Canada, go to a wrecker and get Dodge Dakota push on style from the 90's, fit like a dream and waaaay cheaper. If you want new go to the dealer.
Wes and Classic Heartbeat sometimes has the push on style as well.
__________________
71 GMC 1500 LWB |
01-21-2011, 10:36 AM | #5 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,863
|
Re: GMC paul door seals are great!
Great! That puts a plus on top of the other pluses. Way to go!
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
01-21-2011, 12:36 PM | #6 |
Senior Member
Join Date: Jan 2002
Location: Burghill, Ohio 44404
Posts: 3,401
|
Re: GMC paul door seals are great!
Do you have the part # for them I looked on your web site and only found one set is that them. thanks Gary
__________________
1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396 |
01-21-2011, 12:44 PM | #7 | |
Senior Member
Join Date: Mar 2000
Location: Rockville,In. USA
Posts: 3,718
|
Re: GMC paul door seals are great!
Quote:
You can go to the page they are on at the following link http://www.gmcpauls.com/Pickup.htm Part# 2660241 $49.95 pr & $12.75 shipped priority mail insured anywhere in the USA Paul @ GMCPauls |
|
01-21-2011, 01:58 PM | #8 | |
Senior Member
Join Date: Jan 2002
Location: Burghill, Ohio 44404
Posts: 3,401
|
Re: GMC paul door seals are great!
Quote:
__________________
1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396 |
|
04-19-2011, 02:00 PM | #9 |
Senior Member
Join Date: Mar 2000
Location: Rockville,In. USA
Posts: 3,718
|
Re: GMC paul door seals are great!
We had several people purchase these door opening weatherstrip based upon this thread and I just wanted to get the feedback from those that did regarding what they thought of the installation & finished product installed.
Thanks for any it's greatly Appreciated!! Paul @ GMCPauls |
04-19-2011, 02:03 PM | #10 |
67cheby
Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: GMC paul door seals are great!
they look great.....in the box in my closet !! LOL
|
04-19-2011, 04:49 PM | #11 | |
Registered User
Join Date: Jun 2006
Location: Olive Branch, MS
Posts: 824
|
Re: GMC paul door seals are great!
Quote:
__________________
68 C10 Shortbed Fleetside 06 Chevy Ext Cab Fleetside 03 Grand Prix GTP My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=269999 |
|
02-09-2011, 12:00 PM | #12 | |
Registered User
Join Date: Jan 2005
Location: Clearlake Oaks CA
Posts: 1,716
|
Re: GMC paul door seals are great!
Quote:
__________________
Hello members... I'd like you to know that I sold, my 72 GMC (Ratikle), back in November of 2011. I don't visit the site much anymore, but please feel free, to drop me a private message. RIP...."RATIKLE" |
|
04-20-2011, 05:42 PM | #13 | |
Account Suspended
Join Date: Sep 2009
Location: High Plains of Colorado
Posts: 2,485
|
Re: GMC paul door seals are great!
Quote:
Are the push on style seals available for 63-66's? I didn't see them online. Thanks, John Last edited by lakeroadster; 04-20-2011 at 05:42 PM. |
|
04-21-2011, 05:21 AM | #14 |
Senior Member
Join Date: Mar 2000
Location: Rockville,In. USA
Posts: 3,718
|
Re: GMC paul door seals are great!
John AKA lakeroadster I'm sorry but we only currently have these for the 67-72 trucks, I don't own a 60-66 myself so I haven't had a truck I could use to test the various profiles of this push on style door opening weatherstrip on. If there are any 60-66 owners near Rockville that are willing to let me use there truck to develop this same weatherstrip for the 60-66 series I'd be more than willing to give a free set of push on door weatherstrip to them once I was able to determine the best profile seal to have them made from that worked to seal out the elements while not causing any problems closing the doors.
Paul @ GMCPauls |
04-21-2011, 07:27 PM | #15 |
Registered User
Join Date: Jan 2010
Location: Here
Posts: 5,427
|
Re: GMC paul door seals are great!
Are the push on style seals available for 63-66's? I didn't see them online.
I used these on my 64 gmc truck and they fit nice on mine. |
04-21-2011, 08:23 PM | #16 |
Account Suspended
Join Date: Sep 2009
Location: High Plains of Colorado
Posts: 2,485
|
Re: GMC paul door seals are great!
Sweet! To clarify, are you saying you used the 67-72 push on seals on your 64?
Last edited by lakeroadster; 04-21-2011 at 08:25 PM. |
04-22-2011, 02:18 AM | #17 |
Registered User
Join Date: Jan 2010
Location: Here
Posts: 5,427
|
Re: GMC paul door seals are great!
yes i used these on my 67 and my 64. they are a hare tight on the 64 but should break in just fine. better than anything else ive tried and i aint using the glue on's ever again. there just a mess.
|
02-22-2012, 11:10 AM | #18 | |
Senior Member
Join Date: Mar 2000
Location: Rockville,In. USA
Posts: 3,718
|
Re: GMC paul door seals are great!
Quote:
robbinspd1199@yahoo.com litew8 If you read the description of the cab rubber kit on our web site page it tells you every part that is included in the kit. If you do not see it in the description then its not included. the following is that list Includes standard 8 piece door window seal kit, vent window rubber kit, door opening weather strip kit, windshield gasket ( Deluxe or Standard), Rear window gasket ( Deluxe or Standard) Specify Standard or Deluxe in Cart for 67-72 Large back window, 67 Small back window kit comes as standard or deluxe windshield gasket and standard rear window gasket specify in cart. You can optionally upgrade the door opening weatherstrip in the cart from our original style glue on version to our new and improved modern style that pushes on and requires no glue to install. Every Piece in this entire kit is backed with a lifetime warranty. You'll find the cab rubber kit at this link http://www.gmcpauls.com/Pickup.htm Its the 1st item listed on that page. Where as if you only want the Push-On door seals they are on the same page and are the 9th item listed on that page. GMCPaul |
|
02-22-2012, 03:27 PM | #19 |
Registered User
Join Date: Jul 2011
Location: Des Moines, Iowa
Posts: 3,016
|
Re: GMC paul door seals are great!
Thank you for the reply. I no longer need the door seals, so a kit isn't going to work.
I have a "Custom Deluxe", here's what I'm looking at now: 8 Piece Door Window Seal Kit For Custom & CST Trucks 280037 Includes inner felts with Chrome Bead, outer rubber seal, Division Bar Felt,&Door Glass Channel Run For Both Doors Used On CST & Custom Pickup, Suburban & Panel. LIFETIME WARRANTY. $69.95 67-72 Division Bar Felt 360342 1967-72 Door division bar felt runs down back side of vent window bar from top at door upper frame to bottom inside door. For truck, Blazer, Jimmy, Suburban, Panel. $12.00 67-72 Glass Run Channel 360346 1967-72 Door glass run channel, extends from inside door bottom at back of window up the rear glass run area and across top of door upper frame and ends at division bar. For Truck, Suburban & Panel. $10.95 - Questions - 1) Are all rubber products manufactured by Precision? 2) For the 8 piece above (280037), it says "outer rubber seal", but the 4 piece anti-rattle kit (371090) says "2-outer rubber seals with chrome top bead" is included. Is there a difference for Custom Deluxe models, and why wouldn't the 8 piece kit contain outer rubber seals with "chrome top bead"? 4 Piece Custom & CST Door Window Anti-Rattle Kit 371090 For 1967-72 Truck, Blazer, Jimmy, Suburban&Panel. Includes 2-inner felts with chrome top bead, 2-outer rubber seals with chrome top bead, at bottom of window inside and out, does both doors. LIFETIME WARRANTY. $39.95 Thanks
__________________
project: "my happy mess" |
02-22-2012, 03:56 PM | #20 | |
Senior Member
Join Date: Mar 2000
Location: Rockville,In. USA
Posts: 3,718
|
Re: GMC paul door seals are great!
Quote:
The part # 280037 includes 2 division bar felts and 2 glass run channels so if you only have the 1 truck there is no need to add the part #'s 360342 division bar felt or Part# 360346 glass run channel. we use a Part # 371090 + 2- Part # 360342 & 2 part # 360343 to make our Part # 280037 kit. To be sure your questions get answered quickly about any of our products you can contact us direct by emailing us at robbinspd1199@yahoo.com as I don't always see every post here. Thanks for your interest!! Paul @ GMCPauls |
|
Bookmarks |
|
|