Vintage Air Sale - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lgarret · 12-13-2011, 09:54 AM

good morning Justin, could I get a quote on vintage air for a non factory air 69 chevy truck, big block with stock controls. also looking for cpp front disk brake kit for same, but its 3/4 ton 8 lug kit.
thanks
Lance

lgarret · 12-13-2011, 09:55 AM

Quote:

Originally Posted by lgarret

good morning Justin, could I get a quote on vintage air for a non factory air 69 chevy truck, big block with stock controls. also looking for cpp front disk brake kit for same, but its 3/4 ton 8 lug kit.
thanks
Lance

shipped to 98031

Scottshotrods · 12-13-2011, 11:54 AM

Quote:

Originally Posted by lgarret

good morning Justin, could I get a quote on vintage air for a non factory air 69 chevy truck, big block with stock controls. also looking for cpp front disk brake kit for same, but its 3/4 ton 8 lug kit.
thanks
Lance

P/m sent
Justin

Scottshotrods · 12-14-2011, 08:39 PM

Remember it is not to late to get your Vintage air before the heat comes we have some great deals going on.They will be shutting down after christmas for there year end inventory.So if you want to get your kits before the year comes around let us know and we will take care of you.

Justin

jtj143 · 01-09-2012, 10:37 AM

Hello,
I'm looking to add air conditioning to a '65 Suburban that currently has the single-knob heater. Need a complete system, (fresh air, cold air, heat, defrost) with all hardware. I am keeping the v6 & would like the controls and vents to look like they are supposed to be there. Looking for recommendations. Would there be vents for passengers in the rear? Does your A/C kit replace the existing heater?
Thanks,
Joshua J.
Clarksville, Tenn.

Scottshotrods · 01-09-2012, 11:57 AM

Quote:

Originally Posted by jtj143

Hello,
I'm looking to add air conditioning to a '65 Suburban that currently has the single-knob heater. Need a complete system, (fresh air, cold air, heat, defrost) with all hardware. I am keeping the v6 & would like the controls and vents to look like they are supposed to be there. Looking for recommendations. Would there be vents for passengers in the rear? Does your A/C kit replace the existing heater?
Thanks,
Joshua J.
Clarksville, Tenn.

p/m sent

Justin

Twiztid_66c10 · 02-20-2012, 02:47 AM

p.m. sent

Scottshotrods · 02-20-2012, 12:07 PM

Quote:

Originally Posted by Twiztid_66c10

p.m. sent

p/m sent

Justin

Burb 71 · 02-23-2012, 12:02 AM

I have a 71 non ac Suburban. It has a 292, I will be leaving in it.
Thanks
Jason

Scottshotrods · 02-23-2012, 03:44 PM

Quote:

Originally Posted by Burb 71

I have a 71 non ac Suburban. It has a 292, I will be leaving in it.
Thanks
Jason

p/m sent

Justin

BIGHANDZ · 10-11-2012, 02:35 AM

heyJustin, Looking for a price on a gen 1V for a '71 stepside with a 350 long water pump. Please included any shipping charges to 95330. Thanks

Scottshotrods · 10-11-2012, 11:33 AM

Quote:

Originally Posted by BIGHANDZ

heyJustin, Looking for a price on a gen 1V for a '71 stepside with a 350 long water pump. Please included any shipping charges to 95330. Thanks

P/m sent

Justin

**Hart_Rod** · 01-09-2012, 12:12 PM

Justin - I need to piece together a system to fit in my 69 Suburban (SuperBurb link below). Let me know when's a good time to call you to discuss. Thanks,

Rob

Scottshotrods · 01-09-2012, 12:15 PM

Quote:

Originally Posted by Hart_Rod

Justin - I need to piece together a system to fit in my 69 Suburban (SuperBurb link below). Let me know when's a good time to call you to discuss. Thanks,

Rob

Call me around 30-45 min at 805 485-0382 and I will take care of you

Justin

**Hart_Rod** · 01-09-2012, 01:19 PM

Quote:

Originally Posted by Scottshotrods

Call me around 30-45 min at 805 485-0382 and I will take care of you

Justin

Justin - didn't expect such a quick response,

. How about around 2:30 your time?

Scottshotrods · 01-09-2012, 02:19 PM

Quote:

Originally Posted by Hart_Rod

Justin - didn't expect such a quick response,

. How about around 2:30 your time?

sounds good call me when ever you can

Justin

KensChevy · 01-28-2012, 12:59 AM

I have a Gen IV evap - gonna stay with stock vents for a 68 factory AC cab. Adaptors for this? Also, I have a serpentine setup from a 94 ( I think, it is without air pump, and compressor is on passenger side - pancake style). I want to go with a Sanden compressor (508 I think), and need an adaptor bracket to mount. Need to figure out most of the outside stuff (condensor, dryer, compressor). Any help you can offer would be appreciated.

djinva · 01-28-2012, 10:28 PM

I have been looking at the surefit kits for my 61 Bel Air, I sent you an email.

Thanks

maaboo · 02-08-2012, 09:05 PM

what is price on full sure fit kit for 72 burb and what kind of rear air set ups do you know of that will work in the rear

Scottshotrods · 02-09-2012, 11:44 AM

Quote:

Originally Posted by maaboo

what is price on full sure fit kit for 72 burb and what kind of rear air set ups do you know of that will work in the rear

P/m sent
Justin

djinva · 02-09-2012, 12:59 PM

I never did hear from Scottshotrods on my 61 BelAir, so I purchased a surefit kit from Rainbow Products.

Scottshotrods · 02-09-2012, 01:07 PM

Quote:

Originally Posted by djinva

I never did hear from Scottshotrods on my 61 BelAir, so I purchased a surefit kit from Rainbow Products.

I am sorry you never got my e-mail or p/m I checked thru my e-mails and I did respond to you.

I am glad you went with Vintage air you will be very happy with there product 100%

So If you need anything else let me know

Justin

69CRUZR · 02-10-2012, 09:16 PM

Would love to know exactly what I need for a 53' GMC, 4.8 LS motor, March Enterprises serpentine set-up(still has GM factory A/C compressor), smoothed firewall, and would like to use the billet aluminum looking control panel vs the plastic black turn knobs. Please give me a complete run down as Im looking to do this is the next few days. Try doing a PM to me, but honestly this is my first post on here and I made the account over 2 years ago if I remember right... not sure if its linked to my email.

Otherwise copy to robinson_racer_33@hotmail.com

Looking forward to finally making use of this forum membership I have... I have a 69 C10 Short Step w/ 383 stroker and a 53 GMC w/ 4.8 LS that none of these guys know about!

53 GMC 4.8L LS cammed - YouTube

Scottshotrods · 02-10-2012, 10:49 PM

Quote:

Originally Posted by 69CRUZR

Would love to know exactly what I need for a 53' GMC, 4.8 LS motor, March Enterprises serpentine set-up(still has GM factory A/C compressor), smoothed firewall, and would like to use the billet aluminum looking control panel vs the plastic black turn knobs. Please give me a complete run down as Im looking to do this is the next few days. Try doing a PM to me, but honestly this is my first post on here and I made the account over 2 years ago if I remember right... not sure if its linked to my email.

Otherwise copy to robinson_racer_33@hotmail.com

Looking forward to finally making use of this forum membership I have... I have a 69 C10 Short Step w/ 383 stroker and a 53 GMC w/ 4.8 LS that none of these guys know about!

53 GMC 4.8L LS cammed - YouTube

e-mailed sent

Justin

69CRUZR · 02-11-2012, 11:42 PM

Thank you sir, look forward to speaking with you on the phone!

12-13-2011, 09:54 AM	#1
lgarret Registered User Join Date: Feb 2009 Location: kent, wa Posts: 15	Re: Vintage Air Sale good morning Justin, could I get a quote on vintage air for a non factory air 69 chevy truck, big block with stock controls. also looking for cpp front disk brake kit for same, but its 3/4 ton 8 lug kit. thanks Lance

12-14-2011, 08:39 PM	#4
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Vintage Air Sale Remember it is not to late to get your Vintage air before the heat comes we have some great deals going on.They will be shutting down after christmas for there year end inventory.So if you want to get your kits before the year comes around let us know and we will take care of you. Justin

01-09-2012, 10:37 AM	#5
jtj143 Registered User Join Date: Jun 2010 Location: Dotsonville, Tennessee Posts: 194	Re: Vintage Air Sale Hello, I'm looking to add air conditioning to a '65 Suburban that currently has the single-knob heater. Need a complete system, (fresh air, cold air, heat, defrost) with all hardware. I am keeping the v6 & would like the controls and vents to look like they are supposed to be there. Looking for recommendations. Would there be vents for passengers in the rear? Does your A/C kit replace the existing heater? Thanks, Joshua J. Clarksville, Tenn. __________________ '65 GMC Suburban 4X4, '71 GMC 4X4 LWB - The Yellow Eyed Monster, '86 C10 Silverado - Oldest Daughter's Pickup, '88 S15 GMC Work Truck, '95 GMC SLE 4X4 - Second Daughter's Truck, '99 K1500 GMC Suburban Road Trip Machine, 2000 C2500 W/T Utility Bed Work Truck, '03 Silverado - Wife's Grocery Getter

02-20-2012, 02:47 AM	#7
Twiztid_66c10 Registered User Join Date: Feb 2010 Location: The Dalles Oregon Posts: 191	Re: Vintage Air Sale p.m. sent __________________ 1966 C-10 long wide- currently with 2 3/4 sectioned crossmember, 3 inch cupped a arms with 2700 bags, 67 master cylinder, in the middle of a v8 swap, soon custom rear wishbone set up and bags 1942 chevy/divco ambulance 1937 chevy truck

02-23-2012, 12:02 AM	#9
Burb 71 Registered User Join Date: May 2011 Location: NE Kansas Posts: 48	Re: Vintage Air Sale I have a 71 non ac Suburban. It has a 292, I will be leaving in it. Thanks Jason

10-11-2012, 02:35 AM	#11
BIGHANDZ Registered User Join Date: Jan 2011 Location: STOCKTON CA Posts: 8	Re: Vintage Air Sale heyJustin, Looking for a price on a gen 1V for a '71 stepside with a 350 long water pump. Please included any shipping charges to 95330. Thanks

01-09-2012, 12:12 PM	#13
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,835	Re: Vintage Air Sale Justin - I need to piece together a system to fit in my 69 Suburban (SuperBurb link below). Let me know when's a good time to call you to discuss. Thanks, Rob __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-28-2012, 12:59 AM	#17
KensChevy Registered User Join Date: Jul 2011 Location: Cleburne Texas Posts: 91	Re: Vintage Air Sale I have a Gen IV evap - gonna stay with stock vents for a 68 factory AC cab. Adaptors for this? Also, I have a serpentine setup from a 94 ( I think, it is without air pump, and compressor is on passenger side - pancake style). I want to go with a Sanden compressor (508 I think), and need an adaptor bracket to mount. Need to figure out most of the outside stuff (condensor, dryer, compressor). Any help you can offer would be appreciated.

01-28-2012, 10:28 PM	#18
djinva Registered User Join Date: Jan 2010 Location: Dublin VA Posts: 168	Re: Vintage Air Sale I have been looking at the surefit kits for my 61 Bel Air, I sent you an email. Thanks __________________ 73 C-10 Cheyenne Super 454 60 Impala LS powered 16 Camaro 2SS 6speed 12 Ultra Classic 71 Vega Wagon V8 4 speed

02-08-2012, 09:05 PM	#19
maaboo Registered User Join Date: Nov 2009 Location: watertown,tn Posts: 139	Re: Vintage Air Sale what is price on full sure fit kit for 72 burb and what kind of rear air set ups do you know of that will work in the rear

02-09-2012, 12:59 PM	#21
djinva Registered User Join Date: Jan 2010 Location: Dublin VA Posts: 168	Re: Vintage Air Sale I never did hear from Scottshotrods on my 61 BelAir, so I purchased a surefit kit from Rainbow Products. __________________ 73 C-10 Cheyenne Super 454 60 Impala LS powered 16 Camaro 2SS 6speed 12 Ultra Classic 71 Vega Wagon V8 4 speed

02-11-2012, 11:42 PM	#25
69CRUZR Registered User Join Date: Nov 2007 Location: St Paul, MN Posts: 22	Re: Vintage Air Sale Thank you sir, look forward to speaking with you on the phone!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.