'66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... - Page 96 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frizzle Fry · 03-05-2017, 03:10 PM

Brake/Fuel Lines going in:

watahyahknow · 03-05-2017, 04:00 PM

maibe a bedliner like rinoliner works if you paint it on in several layers
all you basicly need to do is prevent the metal from ringing by adding a softer material or weight

Frizzle Fry · 03-05-2017, 04:17 PM

Quote:

Originally Posted by watahyahknow

maibe a bedliner like rinoliner works if you paint it on in several layers
all you basicly need to do is prevent the metal from ringing by adding a softer material or weight

Yeh, the whole undercarriage is coated with raptorliner. Looking for additional measures.

Cjcolbyjack · 03-05-2017, 06:14 PM

WOW! This is an amazing build. Your attention to detail is truly incredible. I wish I had the patience you do. Thanks for sharing

Frizzle Fry · 03-07-2017, 02:42 AM

Quote:

Originally Posted by Cjcolbyjack

WOW! This is an amazing build. Your attention to detail is truly incredible. I wish I had the patience you do. Thanks for sharing

Thanks brother!

A little progress: I got all the suspension pieces stripped down and ready for powdercoat. Also picked up some stainless hardware for mounting the gas tank 💪

Frizzle Fry · 03-08-2017, 03:45 AM

Fuel tank install:

knomadd · 03-08-2017, 04:04 PM

It's nice seeing updates again! Everything is looking good!

**jkeating1** · 03-09-2017, 02:43 PM

Quote:

Originally Posted by Frizzle Fry

....Had to chop these five wires in order to remove them when I had the car media blasted. They are the only factory wires remaining. Here they are reunited and it feels so good...

".....Reunited 'cause we understood
There's one perfect fit
And, sugar, this one is it
We both are so excited 'cause we're reunited, hey, hey..." (only old guys caught that reference)

Seriously, I can't speak for the noico liner or the DEI, but that gaffers tape is tougher than a $2 steak. I was moto riding and a turn signal fell off, hanging by the wires--one of the guys who's a theater nut taped it back on with gaffer's tape. It stayed like that for months, and when I got around to fixing it--that tape was like a weld.

watahyahknow · 03-09-2017, 03:43 PM

oh its pretty strong allright even though you have different qualities of gaffer tape for different aplications , most common is to seal up airductwork in offices and houses

did you know it was originally devellopped to be a watertight seal for ammoboxes ?
that why they allso call it ducktape as water falls of it like from a ducks back (even though people tink its duct tape)

its just that over time (talking years here) the gleu becomes hard and turns intoo powder and the backing basicly crumbles like burned paper

**jkeating1** · 03-09-2017, 04:12 PM

Actual Gaffer's tape is different than duct tape. It's used by the "gaffer" in stage, TV, and industrial production to attach or cover things the audience isn't supposed to see or tape down electrical cords on stage to prevent the actors from tripping. It's matte black so it doesn't reflect the lighting. I would never have come across it if I hadn't met a theater guy.

Frizzle Fry · 03-10-2017, 11:55 PM

Quote:

Originally Posted by knomadd

It's nice seeing updates again! Everything is looking good!

It's good to be back at it! Dropped off the remaining suspension parts for powdercoating this week

Quote:

Originally Posted by jkeating1

".....Reunited 'cause we understood
There's one perfect fit
And, sugar, this one is it
We both are so excited 'cause we're reunited, hey, hey..." (only old guys caught that reference)

I'm glad someone did

Quote:

Originally Posted by jkeating1

Seriously, I can't speak for the noico liner or the DEI, but that gaffers tape is tougher than a $2 steak. I was moto riding and a turn signal fell off, hanging by the wires--one of the guys who's a theater nut taped it back on with gaffer's tape. It stayed like that for months, and when I got around to fixing it--that tape was like a weld.

Yep, it's definitely not duck/duct tape. The stuff I bought had excellent reviews and I can see why.

Frizzle Fry · 03-14-2017, 12:18 AM

Templates for the DEI Thermal Barrier:

Frizzle Fry · 03-24-2017, 07:17 AM

A little bit more, a little bit more...

Since the trans tunnel is painted and will not be covered inside the car I'm doing a layer of deadener in addition to the DEI thermal barrier. Got the sound deadener in place after a thorough cleaning with wax/grease remover:

ajgriffin · 03-24-2017, 06:37 PM

Looks great Frizzle! Do the Rattletrap guys have any feedback on using this on the exterior? Seems like the environment is a lot harsher in the trans tunnel that what you'd expect inside.

Also, can you tell more about the DEI thermal barrier? I checked out their website and while it looks like it functions well, I'm not sure I'd want it showing much in my engine bay. Are you planning to put any on the firewall? If not, are you concerned about heat in that area?

Frizzle Fry · 03-24-2017, 07:40 PM

Quote:

Originally Posted by ajgriffin

Looks great Frizzle! Do the Rattletrap guys have any feedback on using this on the exterior? Seems like the environment is a lot harsher in the trans tunnel that what you'd expect inside.

Also, can you tell more about the DEI thermal barrier? I checked out their website and while it looks like it functions well, I'm not sure I'd want it showing much in my engine bay. Are you planning to put any on the firewall? If not, are you concerned about heat in that area?

Thanks man. The rattle trap was applied to an extremely clean surface and will be covered by thermal barrier. So the harshness of the environment will be minimal. I agree I don't want that stuff showing, so none on the engine bay side of the firewall. I picked up another thermal barrier material for under the carpet and the interior side of the firewall.

Frizzle Fry · 04-01-2017, 02:16 PM

A few remaining parts back from powdercoating:

[/IMG]

[/URL]

mcbassin · 04-04-2017, 02:24 PM

Wow! great looking powder coat!

VA72C10 · 04-04-2017, 02:53 PM

Everything is looking so fantastic!

**jkeating1** · 04-06-2017, 04:27 PM

Quote:

Originally Posted by Frizzle Fry

"......I don't want that stuff showing, so none on the engine bay side of the firewall."

I bet if it had bright red print instead of blue, you wouldn't even have used it under the trans tunnel!

Frizzle Fry · 06-04-2017, 03:02 AM

Jumping around as always 😏
Been taking advantage of the good weather to finish/paint/clean all the engine parts. It's coming back together:

Frizzle Fry · 06-04-2017, 03:03 AM

The valve cover is out for paint. Any guesses as to color..?

dug224 · 06-04-2017, 06:36 AM

This continues to be one of my favorite builds!!! The level of detail is inspiring....

Graeme_B · 06-04-2017, 07:30 AM

Quote:

Originally Posted by Frizzle Fry

The valve cover is out for paint. Any guesses as to color..?

RED!!

.....although the blue would look classy.

watahyahknow · 06-04-2017, 08:03 AM

think i would go for the blue bodycolour as whell

NONHOG · 06-04-2017, 11:28 AM

Camo?

03-05-2017, 03:10 PM	#2376
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Brake/Fuel Lines going in:

03-05-2017, 04:00 PM	#2377
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... maibe a bedliner like rinoliner works if you paint it on in several layers all you basicly need to do is prevent the metal from ringing by adding a softer material or weight __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

03-05-2017, 06:14 PM	#2379
Cjcolbyjack Registered User Join Date: Jun 2016 Location: kennedale Posts: 103	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... WOW! This is an amazing build. Your attention to detail is truly incredible. I wish I had the patience you do. Thanks for sharing __________________ 51 motor buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=718113. 54 3600 Lincoln aviator chassis swap http://67-72chevytrucks.com/vboard/s...d.php?t=717927

03-08-2017, 03:45 AM	#2381
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Fuel tank install:

03-08-2017, 04:04 PM	#2382
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... It's nice seeing updates again! Everything is looking good! __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

03-09-2017, 03:43 PM	#2384
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... oh its pretty strong allright even though you have different qualities of gaffer tape for different aplications , most common is to seal up airductwork in offices and houses did you know it was originally devellopped to be a watertight seal for ammoboxes ? that why they allso call it ducktape as water falls of it like from a ducks back (even though people tink its duct tape) its just that over time (talking years here) the gleu becomes hard and turns intoo powder and the backing basicly crumbles like burned paper __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

03-09-2017, 04:12 PM	#2385
jkeating1 Senior Member Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Actual Gaffer's tape is different than duct tape. It's used by the "gaffer" in stage, TV, and industrial production to attach or cover things the audience isn't supposed to see or tape down electrical cords on stage to prevent the actors from tripping. It's matte black so it doesn't reflect the lighting. I would never have come across it if I hadn't met a theater guy.

03-14-2017, 12:18 AM	#2387
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Templates for the DEI Thermal Barrier:

03-24-2017, 07:17 AM	#2388
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... A little bit more, a little bit more... Since the trans tunnel is painted and will not be covered inside the car I'm doing a layer of deadener in addition to the DEI thermal barrier. Got the sound deadener in place after a thorough cleaning with wax/grease remover:

03-24-2017, 06:37 PM	#2389
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 581	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Looks great Frizzle! Do the Rattletrap guys have any feedback on using this on the exterior? Seems like the environment is a lot harsher in the trans tunnel that what you'd expect inside. Also, can you tell more about the DEI thermal barrier? I checked out their website and while it looks like it functions well, I'm not sure I'd want it showing much in my engine bay. Are you planning to put any on the firewall? If not, are you concerned about heat in that area? __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

04-01-2017, 02:16 PM	#2391
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... A few remaining parts back from powdercoating: [/IMG] [/URL]

04-04-2017, 02:24 PM	#2392
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Wow! great looking powder coat! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

04-04-2017, 02:53 PM	#2393
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Everything is looking so fantastic! __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-04-2017, 03:02 AM	#2395
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Jumping around as always 😏 Been taking advantage of the good weather to finish/paint/clean all the engine parts. It's coming back together:

06-04-2017, 03:03 AM	#2396
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... The valve cover is out for paint. Any guesses as to color..?



Register or Log In To remove these advertisements.

06-04-2017, 06:36 AM	#2397
dug224 Registered User Join Date: Dec 2011 Location: Mobile, Alabama Posts: 996	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... This continues to be one of my favorite builds!!! The level of detail is inspiring.... __________________ My Build - http://67-72chevytrucks.com/vboard/s...d.php?t=515876

06-04-2017, 08:03 AM	#2399
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... think i would go for the blue bodycolour as whell __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

06-04-2017, 11:28 AM	#2400
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,416	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Camo? __________________ "I feel the need for speed!"... as soon as I am done with my nap.

Register or Log In To remove these advertisements.