NE Parting out 83 chevy 1/2 ton 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

thinair · 05-17-2014, 08:13 PM

Parting this out........
Motor is sold. Dash pad is junk. I am keeping the lift, wheels, seat, guage bezel and I think that is it.....

1. NP203....$50
2. Box...$600 (does have some rust in the floor)
3. Dana 44 w/3.07s and a flat top knuckle.....$200
4. Corp 12 bolt w/3.07s....$125
5.SOLD Column w/tilt & cruise. Very tight $100
6.SOLD Rear aluminum slider w/latch..... $45

All other parts let me know and I will check on condition and give a price. All prices are plus shipping and this is also listed locally.

thinair · 05-17-2014, 08:39 PM

Ooops, it is a GMC, but the only thing gmc is the couple of emblems that are on it.

thefraze_1020 · 05-20-2014, 11:31 PM

What kind of shape are the gas tanks in? I need the strap supports. Two of 'em.

**ScottH** · 05-21-2014, 09:15 AM

Is the radiator available, and how much for the grille?

thinair · 05-25-2014, 11:57 AM

Quote:

Originally Posted by thefraze_1020

What kind of shape are the gas tanks in? I need the strap supports. Two of 'em.

single tank and it is good. I would rather leave them with the tank and someone can buy it complete and ready to bolt in.

thinair · 05-25-2014, 12:16 PM

Quote:

Originally Posted by ScottH

Is the radiator available, and how much for the grille?

radiator is a recent replacement 4 core........$180 plus shipping

The grille has the top bar at each corner broken, the pieces are there and 3 people have looked at it and said "that grille is perfect"....no one see's it until I point it out. And the two bottom mounts on each side are missing part of the "hole" that the screw goes through but will still work since that screw should have a washer on it anyway..........$30 plus the ride.

thinair · 05-25-2014, 12:20 PM

Sorry about the delay in answering...... work,work,work!

fishingjred73 · 05-26-2014, 05:21 PM

Interested in steering column pending shipping price, to business address 71467 zip code.

thinair · 05-26-2014, 09:56 PM

Quote:

Originally Posted by fishingjred73

Interested in steering column pending shipping price, to business address 71467 zip code.

I measured, weighed, and got a quote without the steering wheel to keep the package size down........ $35.00 Shipping

fishingjred73 · 05-26-2014, 10:18 PM

Ok I'll take it, PM me your payment information please.

thinair · 05-26-2014, 10:55 PM

Quote:

Originally Posted by fishingjred73

Ok I'll take it, PM me your payment information please.

PM sent

Tylerz181500 · 05-27-2014, 10:27 AM

shipping might be a killer but how bout the engine crossmember/mounts?

thinair · 05-27-2014, 11:38 AM

Quote:

Originally Posted by Tylerz181500

shipping might be a killer but how bout the engine crossmember/mounts?

i have not got the truck that far down yet. I'll keep you in mind and get back to you when I do.

Tylerz181500 · 05-27-2014, 01:41 PM

thank you

bopper_702 · 06-04-2014, 05:56 AM

Is this a short bed? If so would u be interested in selling the passanger
Bed side only shipped to vegas if nott rotten?

thinair · 06-04-2014, 10:03 PM

^^^^^^ long box.

bopper_702 · 06-04-2014, 11:57 PM

Thanks

tylervalo · 06-05-2014, 04:44 PM

How much for the dash bezel, the part that holds the 2 vents in (vents not needed)

thinair · 06-05-2014, 07:50 PM

Quote:

Originally Posted by tylervalo

How much for the dash bezel, the part that holds the 2 vents in (vents not needed)

It might have one broken stud, otherwise with the High Sierra emblem, $25 plus shipping.

**aotte1** · 06-07-2014, 11:15 PM

Does it have power steering, interested in pitman arm, drag link?
Les

B_derK20 · 06-08-2014, 12:44 AM

Does the truck have the wheel well moldings for the rear? Also what condition is the 4 headlight harness in?

**aotte1** · 06-08-2014, 11:58 AM

For the power steering question, need the parts to be OEM design, vs lift type pitman arm.
Thanks,
Les

thinair · 06-09-2014, 12:52 AM

Quote:

Originally Posted by aotte1

For the power steering question, need the parts to be OEM design, vs lift type pitman arm.
Thanks,
Les

the gear box and arms have already been sold.

BLT gmc · 06-09-2014, 11:27 AM

It does not look like there is a front sway bar set-up, but i will ask do you have a front swaybar set-up? Bruce

benoit454 · 06-09-2014, 05:42 PM

is the flat top knuckle the ps or ds one and would you sell it separately if it's the ps one?

05-17-2014, 08:13 PM	#1
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 996	Parting out 83 chevy 1/2 ton 4x4 Parting this out........ Motor is sold. Dash pad is junk. I am keeping the lift, wheels, seat, guage bezel and I think that is it..... 1. NP203....$50 2. Box...$600 (does have some rust in the floor) 3. Dana 44 w/3.07s and a flat top knuckle.....$200 4. Corp 12 bolt w/3.07s....$125 5.SOLD Column w/tilt & cruise. Very tight $100 6.SOLD Rear aluminum slider w/latch..... $45 All other parts let me know and I will check on condition and give a price. All prices are plus shipping and this is also listed locally. Last edited by thinair; 06-04-2014 at 10:30 PM.

05-17-2014, 08:39 PM	#2
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 996	Re: Parting out 83 chevy 1/2 ton 4x4 Ooops, it is a GMC, but the only thing gmc is the couple of emblems that are on it.

05-20-2014, 11:31 PM	#3
thefraze_1020 Registered User Join Date: Mar 2014 Location: Mount Vernon, WA Posts: 417	Re: Parting out 83 chevy 1/2 ton 4x4 What kind of shape are the gas tanks in? I need the strap supports. Two of 'em. __________________ Cameron 1984 Chevy C20 Custom Deluxe

05-21-2014, 09:15 AM	#4
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,186	Re: Parting out 83 chevy 1/2 ton 4x4 Is the radiator available, and how much for the grille? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon 2008 Corvette convertible

05-25-2014, 12:20 PM	#7
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 996	Re: Parting out 83 chevy 1/2 ton 4x4 Sorry about the delay in answering...... work,work,work!

05-26-2014, 05:21 PM	#8
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 811	Re: Parting out 83 chevy 1/2 ton 4x4 Interested in steering column pending shipping price, to business address 71467 zip code. __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/

05-26-2014, 10:18 PM	#10
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 811	Re: Parting out 83 chevy 1/2 ton 4x4 Ok I'll take it, PM me your payment information please. __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/

05-27-2014, 10:27 AM	#12
Tylerz181500 Registered User Join Date: May 2014 Location: clinton township Posts: 75	Re: Parting out 83 chevy 1/2 ton 4x4 shipping might be a killer but how bout the engine crossmember/mounts?

05-27-2014, 01:41 PM	#14
Tylerz181500 Registered User Join Date: May 2014 Location: clinton township Posts: 75	Re: Parting out 83 chevy 1/2 ton 4x4 thank you

06-04-2014, 05:56 AM	#15
bopper_702 Registered User Join Date: Jun 2012 Location: LAS VEGAS, NEVADA Posts: 105	Re: Parting out 83 chevy 1/2 ton 4x4 Is this a short bed? If so would u be interested in selling the passanger Bed side only shipped to vegas if nott rotten? __________________ 1997 GMC SIERRA STEPSIDE 1986 CHEVY C10 1968 CHEVY C20 -JOSH IG:bopper702

06-04-2014, 10:03 PM	#16
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 996	Re: Parting out 83 chevy 1/2 ton 4x4 ^^^^^^ long box.

06-04-2014, 11:57 PM	#17
bopper_702 Registered User Join Date: Jun 2012 Location: LAS VEGAS, NEVADA Posts: 105	Re: Parting out 83 chevy 1/2 ton 4x4 Thanks __________________ 1997 GMC SIERRA STEPSIDE 1986 CHEVY C10 1968 CHEVY C20 -JOSH IG:bopper702

06-05-2014, 04:44 PM	#18
tylervalo Registered User Join Date: Sep 2011 Location: Knoxville, Tn Posts: 408	Re: Parting out 83 chevy 1/2 ton 4x4 How much for the dash bezel, the part that holds the 2 vents in (vents not needed)

06-07-2014, 11:15 PM	#20
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: Parting out 83 chevy 1/2 ton 4x4 Does it have power steering, interested in pitman arm, drag link? Les

06-08-2014, 12:44 AM	#21
B_derK20 Registered User Join Date: Apr 2011 Location: Clifton, CO Posts: 75	Re: Parting out 83 chevy 1/2 ton 4x4 Does the truck have the wheel well moldings for the rear? Also what condition is the 4 headlight harness in?



Register or Log In To remove these advertisements.

06-08-2014, 11:58 AM	#22
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: Parting out 83 chevy 1/2 ton 4x4 For the power steering question, need the parts to be OEM design, vs lift type pitman arm. Thanks, Les

06-09-2014, 11:27 AM	#24
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,107	Re: Parting out 83 chevy 1/2 ton 4x4 It does not look like there is a front sway bar set-up, but i will ask do you have a front swaybar set-up? Bruce

06-09-2014, 05:42 PM	#25
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Parting out 83 chevy 1/2 ton 4x4 is the flat top knuckle the ps or ds one and would you sell it separately if it's the ps one? __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

Register or Log In To remove these advertisements.