Rust free 1972 K5 4X4 Blazer for parts or whole

[LeftCoast32]

I had my 1972 K5 4X4 Blazer Tub media blasted and prepared for paint. It is completely ready for paint and I am thinking about parting out my entire Blazer. I have over $20,000.00 in receipts for parts alone. You will not find a better Blazer out there period!

I am wondering what kind of interest there is in the Tub and everything except the engine, wiring and complete dash w/AC if I was to part it out or selling everything as a whole right now.

No expence has been spared to date and I just dont have the time to finish it. I would be willing to sell it the way it is right now for the right price. The only things that it still needs is carpet and sill plates. I have everything else to finish it, it even runs and drives at this time.

A friend has already been paid to finish all the preperation work on all panels. I was going to have it painted Black so I wanted everything perfectly straight. The tub is all done, the front fenders are almost finished, the tailgate is almost finished, the doors are almost finished and the hood only needs a little work to be perfect. Every piece of the body has been media blasted, coated in DP90 then Semprimed and blocked till straight in preperation for the final coat of Black. I have stainless steel bolts to mount almost every piece of sheet metal.

Like I said I am interested in finding out the interest in either selling it as is or parting it out completely. I have full documentation on everything that has been done to this Blazer since I have owned it. I also have a picture book to document the restoration to date.

Joseph
(760)522-8669
aloysius66@hotmail.com

[earl87gta]

I cant belive your thinking abought selling it Ive only seen the pics you have posted in the pics section but it looks like it was almost done. I big list of parts I need like tach dash , A/c tail gate, ruber floor mat and the list goes on.

[LeftCoast32]

I know it is almost finished, I would rather sell it whole. I will keep you posted!

[wildbill]

If it has a single wall top, I might be interested.
Thanks
Bill

[LeftCoast32]

Actually it has a double wall top, but I have a guy that wants to look at the top today. I do have a perfect rear hatch and a line on a single wall top.

[LeftCoast32]

this is most of what i have to go with it.

1972 BLAZER PARTS

SHEETMETAL
A/C BODY TUB (ALL BODY WORK DONE) W/CLEAR TITLE)
FRONT FENDERS X2 (NEW)
FRONT FENDERS X2 (ORIGINAL)
HOOD (ORIGINAL)
CORE SUPPORT (NEW)
DOORS X2 (PICKUP DOORS CUT DOWN)
TAILGATE (ORIGINAL)
FRONT BUMPER (NEW)
REAR BUMPER (NEW)
DOUBLE WALL TOP (UNRESTORED)
REAR HATCH ORIGINAL UNBROKEN (W/HARDWARE EXCEPT HANDLE)

EXTERIOR
TAILGATE PANEL (CHEVROLET W/WOODGRAIN) (NEW)
TAILGATE MOLDINGS UPPER (NEW)
FRONT GRILL COMPLETE (NEW)
EXTERIOR DOOR HANDLES (NEW)
EXTERIOR MIRRORS (NEW)
LOCK SET COMPLETE (NEW)
K5 BLAZER EMBLEMS (NEW)
350 EMBLEMS (NEW)
ALL GLASS EXCEPT WINDSHIELD (TINTED)

INTERIOR
VISORS X2 W/MOUNTS (NEW)
DASH PAD (BLACK) (NEW)
TACH DASH CLUSTER REBUILT WITH 0 MILES
DOOR PANELS (BLACK) (NEW)
REAR INTERIOR PANELS W/CHROME MOLDINGS (BLACK) (NEW)
BUCKET SEATS (UNRESTORED)
BLACK HOUNDS TOOTH BUCKET SEAT COVERS (NEW)
BLACK BUCKET SEAT BACKS (NEW)
BUCKET SEAT FRAMES (RESTORED)
REAR SEAT (UNRESTORED) BLACK W/BRACKETS
STEERING COLUMN AUTOMATIC NON TILT (RESTORED)
STEERING WHEEL CORVETTE W/ADAPTER TO COLUMN
GUAGE CLUSTER W/TACH (RESTORED)
CHROME ASH TRAY (NEW)
CHROME AND BLACK GLOVE BOX DOOR (RESTORED)
GLOVE BOX LINER
STOCK AM RADIO (WORKS)
COMPLETE ORIGINAL RESTORED A/C SYSTEM
COMPLETE WIRING HARNESSES (NEW)
INTERIOR DOOR HANDLES (NEW)
INTERIOR WINDOW CRANK HANDLES (NEW)
DOOR WEATHERSTRIP COMPLETE X2 (NEW)
DRIP RAIL DEFLECTORS (NEW)
DOOR TOP CAPS (RESTORED)
VENT WINDOWS (NEW) X2
VENT WINDOWS (USED) X2

SUSPENSION
1972 4X4 FRAME PERFECT SHAPE
4” FRONT ROUGH COUNTRY SPRINGS
6”REAR ROUGH COUNTRY SPRINGS
ROUGH COUNTRY SHOCKS W/BLACK BOOTS (NEW)
COMPLETE U-BOLT SET FOR SPRINGS
COMPLETE ZINC BOLTS FOR SUSPENSION
SUSPENSION POLY BUSHINGS COMPLETE
BODY POLY BUSHINGS COMPLETE
RAISED STEERING ARM
DRAG LINK NEW
FRONT BRAIDED STAINLESS STEEL BRAKE LINES (6”)
REAR BRAIDED STAINLESS STEEL BRAKE LINES (6”)

LIGHTING
SIDE MARKERS FRONT AND REAR (NEW)
REAR LIGHTS (RESTORED) W/BUCKETS
FRONT MARKERS (RESTORED) W/BUCKETS
HEADLIGHTS W/BUCKETS
INTERIOR UNDERDASH LIGHTING
GLOVE BOX LIGHTING

WHEELS AND TIRES
15X8 6 LUG RALLEY WHEELS (W/CENTER CAPS AND BEAUTY RINGS)
35X12.5 BFG MUD TERRAIN 95% TREAD

DRIVE TRAIN
4 CORE RADIATOR REBUILT
1970 LT1 BLOCK
1970 LT1 FORGED CRANK
1970 LT1 FORGED RODS
TRW FORGED PISTONS .030
MILODON OIL PAN
1970 LT1 CAMEL BACK HEADS, 2.02/1.60 3 ANGLE VALVE JOB, PORTED & POLISHED
HOLLEY ALUMINUM HEADS (SYSTEMAX 425/425)
LUNATI CAM
LUNATI TIMING GEARS
HOLLEY DOMINATOR INTAKE
3310 HOLLEY CARB 750 CFM
MALLORY UNILIGHT DISTRIBUTOR
ALUMINUM WATER PUMP
TH350
NP205
ADAPTER PLATE
DRIVE SHAFT FRONT (CV) CUSTOM
DRIVE SHAFT REAR CUSTOM
DANA 44 DISC BRAKE FRONT (6LUG, 3.08, NEWER BRAKES)
CORPORATE 12 BOLT REAR (6 LUG, 3.08, NEWER BRAKES)
AGR STEERING BOX (VARIABLE RATIO)

[LeftCoast32]

I can work up a price for everything with or without the engine.

I will be at work and can not not check my hotmail account while there. Please pm me or I will reply to e-mail tonight for everyone interested right now. There are pictures of the Blazer all over the site right now just do a search for my user name. I have tried to reply to all e-mails so far. Thanks!

[wildbill]

I am interested in the line you have on the single wall. Do you have any contact info for the top.
Thanks
Bill Brinegar

[earl87gta]

Sent you a PM

[LeftCoast32]

Thanks for the interest on the parts to date and please keep pming me so I can keep everyone straight. I want to make sure I am answering all questions on selling it whole first. There are 3 people in line right now that I am talking with on the possiblity of selling it whole first. I do have an extensive list of more then what is above if I am to part it. An example is new hood hinges, new window regulators, new zinc coated door hinges, stainless bolts for just about everything, etc.

[jamesjones]

You have a PM Joe.

James

[LeftCoast32]

It is either sell it now or pay storage for at least another year before I can finish it. I pay $400 a month in storage fees right now. It is a gorgeous Blazer, I guarantee that there isnt another in this shape as far as detail work goes. I would like to get $15,000 for it with the engine and everything or $13,000 for everything except the engine. I can break it up as need for a purchase but I would like to keep it as close to whole as possible.

[earl87gta]

I hate to see ya let it go. Tell the Marines to give you a break so you can get it done and if not and you have to part it out let me know.

[LeftCoast32]

dash 5

[LeftCoast32]

dash 6

[LeftCoast32]

dash 7

[LeftCoast32]

A/C system

[LeftCoast32]

engine 2

[LeftCoast32]

engine 3

[LeftCoast32]

gargage picture

[red71cheyenne]

Wish I had the money or time. Too bad it has to go. What did you coat the floor with? Is it a liner, or is the photo just off a little? Thanks, Jeff.

[LeftCoast32]

The whole body has been shot with DP90 an epoxy sealer/primer over the bare metal. The quarter panels have been shot with a high build primer, blocked down till completely flat then sealed with the same DP90 in preperation for the paint. I had plans to line-x the floors after the paint was done.

[meathead95]

how much for the rear panels? got a pic? are they nos?

[LeftCoast32]

I will only sell the rear panels if I am parting the Blazer out. They are exact reproductions that are no longer made as far as I know. They are black and have the scroll work like the door panels. I paid $500 of them about 3 or 4 years ago, they are still in the plastic. If I was to sell them I would need at least what I have into them.

[meathead95]

let me know if that time comes