Anybody here with tricked out chevy 6 cylinders? - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**TJ's Chevy** · 11-22-2013, 02:43 PM

I used silver header paint for the lettering on my valve cover. Then touched up some spots with a sharpie....has help up perfectly!

**TJ's Chevy** · 11-23-2013, 12:12 PM

Quote:

Originally Posted by Hogger54

I'm just in the tear down stages right now with my 235. I've got the 848 head. Going with Fenton dual carb intake with my two Rochester B's. Fenton headers out to glasspacks. Got an HEI distributor from a '78 Nova, and alternator for the 12v conversion.
I can't wait to get her up and running. I did finish the valve cover.

You might consider a .30 or .60 overbore...and maybe a mild cam to.

Hogger54 · 11-23-2013, 10:34 PM

Yes, planning on a mild cam upgrade.
Will that require different push rods, rockers, springs, etc?

**TJ's Chevy** · 11-23-2013, 11:02 PM

Quote:

Originally Posted by Hogger54

Yes, planning on a mild cam upgrade.
Will that require different push rods, rockers, springs, etc?

Will require better springs, I am not sure if those stock cams are mechanical or hydraulic? Rocker ratio will stay the same as far as I know...if you can find a cam that uses the stock rocker then you will be fine. Push rods I am not sure. The cam I am getting for my 292 comes with them. As far as I know length won't change...if the motor is gonna be reving over 6,000 rpm then a 3/8 pushrod is required. Hope it helps....here is a book you might consider purchasing. T.J.

Hogger54 · 11-24-2013, 01:08 AM

Cool, thanks.

**TJ's Chevy** · 12-10-2013, 12:04 PM

So..any updates?

**TJ's Chevy** · 01-12-2014, 06:03 PM

There's gotta be more!!! LOL! So awhile back my BRAND NEW out of box Edelbrock carb took a dump on me after 15 miles of easy driving.....so I got another one! LOL! We're back to normal now.

ANY UPDATES!?!?!?!??! MORE PHOTOS!?!?!?!?!? I can't be the only one with a 6 banger!!!! Theres gotta be more den dis!!!! LOL!

Hogger54 · 01-12-2014, 07:56 PM

6 or 1/2 dozen. Can't wait to see how she runs.
Still need to get fuel tank, run lines, and some wiring.

**TJ's Chevy** · 01-12-2014, 07:59 PM

Quote:

Originally Posted by Hogger54

6 or 1/2 dozen. Can't wait to see how she runs.
Still need to get fuel tank, run lines, and some wiring.

OOOH that looks sharp! Great work!

70gmcjimmy · 01-12-2014, 09:25 PM

It may be called "tricked out" compared to what it looked like when I got it!-LOL Late 1960's Chevy 230 in my '55 GMC.

DAC

eagleuh1 · 01-13-2014, 01:01 AM

TJ and Hogger, both engines look great. Hogger, what intake is that? Thanks. Jim

Hogger54 · 01-13-2014, 12:03 PM

Thanks.
That's a Fenton intake.

**TJ's Chevy** · 01-13-2014, 12:05 PM

Quote:

Originally Posted by eagleuh1

TJ and Hogger, both engines look great. Hogger, what intake is that? Thanks. Jim

Thanks!

Quote:

Originally Posted by Hogger54

Thanks.
That's a Fenton intake.

Hogger.
Fenton intake and fenton headers?

Hogger54 · 01-13-2014, 01:04 PM

No, headers are just tubes from Chevs of the 40's I think. Ordered them from somewhere else, but that was the box that showed up, weird.

MARTINSR · 01-13-2014, 03:35 PM

When I bought my truck (1973) it had a hot six in it with a home made intake that my brother and his friend made in highschool metal shop class. I have been an inline six fan ever since.

I am now rebuiding it (for the third time) with a 53 Corvette theme so it will be running my dream set when I was a kid this 53-54 Corvette intake with three side draft single barrels.

Brian

**TJ's Chevy** · 01-14-2014, 02:57 PM

^^^^sweet!^^^

MARTINSR · 01-14-2014, 06:57 PM

Quote:

Originally Posted by T.J. MCCAULEY

^^^^sweet!^^^

Thanks!

Brian

eagleuh1 · 01-16-2014, 01:51 AM

MARTINSR, that is one wild looking homemade high rise intake. Love the sidedraft setup. Jim

11-22-2013, 02:43 PM	#51
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Anybody here with tricked out chevy 6 cylinders? I used silver header paint for the lettering on my valve cover. Then touched up some spots with a sharpie....has help up perfectly! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

11-23-2013, 10:34 PM	#53
Hogger54 Registered User Join Date: Aug 2013 Location: Lumberton, TX Posts: 284	Re: Anybody here with tricked out chevy 6 cylinders? Yes, planning on a mild cam upgrade. Will that require different push rods, rockers, springs, etc? __________________ My '54 3600 build. My '63 GMC build

11-24-2013, 01:08 AM	#55
Hogger54 Registered User Join Date: Aug 2013 Location: Lumberton, TX Posts: 284	Re: Anybody here with tricked out chevy 6 cylinders? Cool, thanks. __________________ My '54 3600 build. My '63 GMC build

12-10-2013, 12:04 PM	#56
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Anybody here with tricked out chevy 6 cylinders? So..any updates? __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

01-12-2014, 06:03 PM	#57
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Anybody here with tricked out chevy 6 cylinders? There's gotta be more!!! LOL! So awhile back my BRAND NEW out of box Edelbrock carb took a dump on me after 15 miles of easy driving.....so I got another one! LOL! We're back to normal now. ANY UPDATES!?!?!?!??! MORE PHOTOS!?!?!?!?!? I can't be the only one with a 6 banger!!!! Theres gotta be more den dis!!!! LOL! Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

01-12-2014, 07:56 PM	#58
Hogger54 Registered User Join Date: Aug 2013 Location: Lumberton, TX Posts: 284	Re: Anybody here with tricked out chevy 6 cylinders? 6 or 1/2 dozen. Can't wait to see how she runs. Still need to get fuel tank, run lines, and some wiring. __________________ My '54 3600 build. My '63 GMC build

01-12-2014, 09:25 PM	#60
70gmcjimmy GMCDAC Join Date: Apr 2006 Location: Rapid City, SD Posts: 837	Re: Anybody here with tricked out chevy 6 cylinders? It may be called "tricked out" compared to what it looked like when I got it!-LOL Late 1960's Chevy 230 in my '55 GMC. DAC Attached Images __________________ 1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild! 1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish! 1955 GMC 100 2nd design driven almost daily! Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09 GMC driver for 30 years!

01-13-2014, 01:01 AM	#61
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: Anybody here with tricked out chevy 6 cylinders? TJ and Hogger, both engines look great. Hogger, what intake is that? Thanks. Jim

01-13-2014, 12:03 PM	#62
Hogger54 Registered User Join Date: Aug 2013 Location: Lumberton, TX Posts: 284	Re: Anybody here with tricked out chevy 6 cylinders? Thanks. That's a Fenton intake. __________________ My '54 3600 build. My '63 GMC build

01-13-2014, 01:04 PM	#64
Hogger54 Registered User Join Date: Aug 2013 Location: Lumberton, TX Posts: 284	Re: Anybody here with tricked out chevy 6 cylinders? No, headers are just tubes from Chevs of the 40's I think. Ordered them from somewhere else, but that was the box that showed up, weird. __________________ My '54 3600 build. My '63 GMC build

01-13-2014, 03:35 PM	#65
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Anybody here with tricked out chevy 6 cylinders? When I bought my truck (1973) it had a hot six in it with a home made intake that my brother and his friend made in highschool metal shop class. I have been an inline six fan ever since. I am now rebuiding it (for the third time) with a 53 Corvette theme so it will be running my dream set when I was a kid this 53-54 Corvette intake with three side draft single barrels. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

01-14-2014, 02:57 PM	#66
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Anybody here with tricked out chevy 6 cylinders? ^^^^sweet!^^^ __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

01-16-2014, 01:51 AM	#68
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: Anybody here with tricked out chevy 6 cylinders? MARTINSR, that is one wild looking homemade high rise intake. Love the sidedraft setup. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.