KY parting out 68 c10 - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

philB · 11-04-2012, 11:09 PM

that is a strange looking crack, but just need the prices for both and will need to have shipped.

bigjoe77 · 11-05-2012, 10:32 PM

Quote:

Originally Posted by c10monkey

Wrong bracket.... thanks for trying
Posted via Mobile Device

No problem

bigjoe77 · 11-05-2012, 10:39 PM

Quote:

Originally Posted by philB

that is a strange looking crack, but just need the prices for both and will need to have shipped.

PM sent. I think the crack is actually a crack in some bondo in the door

bigjoe77 · 11-07-2012, 10:32 PM

ttt

philB · 11-08-2012, 08:55 AM

any idea on cost for drivers door with shipping, also on power steering set up.

**70STOVEBOLT** · 11-08-2012, 12:34 PM

Bigjoe, are #28, 29, 33, and 35 still available? If so, price shipped to 46562 please.

Maddoxdb · 11-08-2012, 12:36 PM

Door sills and ignition bezel arrived yesterday. Thank you sir.
Dustin
Posted via Mobile Device

bigjoe77 · 11-08-2012, 10:50 PM

Quote:

Originally Posted by philB

any idea on cost for drivers door with shipping, also on power steering set up.

Sorry, I wasn't aware that you were still interested since I didn't get a response from the message I sent. I won't be able to ship the door. Are you interested in the steering column and power steering gearbox?

bigjoe77 · 11-08-2012, 10:56 PM

Quote:

Originally Posted by Maddoxdb

Door sills and ignition bezel arrived yesterday. Thank you sir.
Dustin
Posted via Mobile Device

You're welcome. Thank you.

bigjoe77 · 11-08-2012, 11:00 PM

Quote:

Originally Posted by 70STOVEBOLT

Bigjoe, are #28, 29, 33, and 35 still available? If so, price shipped to 46562 please.

There were actually two #35s before I just changed it, but yes, all of those are still available. I think I can ship it for no more than $10. I'll have to weigh it to be sure. Let you know tomorrow.

**70STOVEBOLT** · 11-09-2012, 09:31 AM

Quote:

Originally Posted by bigjoe77

There were actually two #35s before I just changed it, but yes, all of those are still available. I think I can ship it for no more than $10. I'll have to weigh it to be sure. Let you know tomorrow.

Ok. If #36 is still available, I would take that too. You should be able to ship all of that in a USPS medium flat rate box for around $11. Let me know what you find out. My zip is 46562 if you need it.

Thanks,
Mark

bigjoe77 · 11-09-2012, 09:42 AM

I could definitely do it for the medium flat rate price of $11.35, but I was going to check the parcel post price. It takes a little longer, but it is cheaper. Either way is okay by me. Let me know. Thanks

**70STOVEBOLT** · 11-09-2012, 10:00 AM

I'm all for saving $ and I'm not in a hurry. Check it out and let me know on parcel post. So I will take #28, 29, 33, 35, 36 if they are available. Just let me know.

Thanks again,
Mark.

bigjoe77 · 11-10-2012, 12:32 AM

Quote:

Originally Posted by 70STOVEBOLT

I'm all for saving $ and I'm not in a hurry. Check it out and let me know on parcel post. So I will take #28, 29, 33, 35, 36 if they are available. Just let me know.

Thanks again,
Mark.

Hey Mark, I can ship those parts to you for $9 if you would like.

Thanks,

Joe

**70STOVEBOLT** · 11-10-2012, 10:24 AM

Joe, sounds good, what is my total then? I will send you a postal money order if that is ok.

Thanks,
Mark

bigjoe77 · 11-11-2012, 12:33 AM

The total would be $60. A postal mo will be fine as long as you don't mind me not shipping the stuff until I receive and clear it through the post office.

**70STOVEBOLT** · 11-15-2012, 10:22 AM

Quote:

Originally Posted by bigjoe77

The total would be $60. A postal mo will be fine as long as you don't mind me not shipping the stuff until I receive and clear it through the post office.

Sorry for the late reply. I don't really need #35 but I will take the rest (28,29,33,36), so $50 shipped?

Thanks,
Mark

bigjoe77 · 11-15-2012, 10:38 AM

Yes sir
Posted via Mobile Device

**70STOVEBOLT** · 11-15-2012, 05:56 PM

Quote:

Originally Posted by bigjoe77

Yes sir
Posted via Mobile Device

If you pm your address I will get a postal money order on the way.

Thanks,
Mark

CMH77 · 11-16-2012, 12:14 AM

Do you still have #43. 67-71 Metal Front Door Panel Set - I have both, just haven't taken the other off of the truck yet. Some rust on the backside. - $20

If so, what condition (I didn't see pics). Also, would you ship, what would total cost be to 62704, and do you accept PayPal for payment?

Thanks

bigjoe77 · 11-16-2012, 09:09 AM

Yes, I still have the door panels. There is a little surface rustt on the backside, but could be cleaned up nicely. I'll get some more pics posted here soon. I'll check on shipping too. Thanks.

CMH77 · 11-16-2012, 10:35 AM

Thanks bigjoe77. Pending total cost, I want them.

bigjoe77 · 11-16-2012, 11:06 PM

Pics of the door panels. I haven't removed the one from the door yet b/c I don't have the necessary tool. From what I can tell from feeling behind it, I believe that panel is better than the other.

Name: IMG_1335.jpg
Views: 126
Size: 53.5 KB

Name: IMG_1335.jpg
Views: 126
Size: 53.5 KB

Name: IMG_1336.jpg
Views: 118
Size: 52.1 KB

Name: IMG_1337.jpg
Views: 127
Size: 36.4 KB

Name: IMG_1338.jpg
Views: 108
Size: 46.2 KB

mo · 11-17-2012, 01:37 PM

Hi joe got the parts thanks. Also, do you have the wire harness from the firewall to the battery and engine for this 68? What condition is it in? How much shipped to 93013 and I need the whole enchilada including any relays and junction blocks... Thanks
Mo
Posted via Mobile Device

bigjoe77 · 11-17-2012, 09:42 PM

Hey Mo. Glad the parts made it. I'll check on that harness. There are so many damn harnesses on these trucks...

11-04-2012, 11:09 PM	#101
philB Registered User Join Date: Oct 2012 Location: new orleans, la. Posts: 217	Re: parting out 68 c10 that is a strange looking crack, but just need the prices for both and will need to have shipped.

11-07-2012, 10:32 PM	#104
bigjoe77 Registered User Join Date: Oct 2010 Location: Georgetown Kentucky Posts: 203	Re: parting out 68 c10 ttt

11-08-2012, 08:55 AM	#105
philB Registered User Join Date: Oct 2012 Location: new orleans, la. Posts: 217	Re: parting out 68 c10 any idea on cost for drivers door with shipping, also on power steering set up.

11-08-2012, 12:34 PM	#106
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,217	Re: parting out 68 c10 Bigjoe, are #28, 29, 33, and 35 still available? If so, price shipped to 46562 please. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-08-2012, 12:36 PM	#107
Maddoxdb Registered User Join Date: Jun 2011 Location: Elk city ok Posts: 891	Re: parting out 68 c10 Door sills and ignition bezel arrived yesterday. Thank you sir. Dustin Posted via Mobile Device

11-09-2012, 09:42 AM	#112
bigjoe77 Registered User Join Date: Oct 2010 Location: Georgetown Kentucky Posts: 203	Re: parting out 68 c10 I could definitely do it for the medium flat rate price of $11.35, but I was going to check the parcel post price. It takes a little longer, but it is cheaper. Either way is okay by me. Let me know. Thanks

11-09-2012, 10:00 AM	#113
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,217	Re: parting out 68 c10 I'm all for saving $ and I'm not in a hurry. Check it out and let me know on parcel post. So I will take #28, 29, 33, 35, 36 if they are available. Just let me know. Thanks again, Mark. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-10-2012, 10:24 AM	#115
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,217	Re: parting out 68 c10 Joe, sounds good, what is my total then? I will send you a postal money order if that is ok. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-11-2012, 12:33 AM	#116
bigjoe77 Registered User Join Date: Oct 2010 Location: Georgetown Kentucky Posts: 203	Re: parting out 68 c10 The total would be $60. A postal mo will be fine as long as you don't mind me not shipping the stuff until I receive and clear it through the post office.

11-15-2012, 10:38 AM	#118
bigjoe77 Registered User Join Date: Oct 2010 Location: Georgetown Kentucky Posts: 203	Re: parting out 68 c10 Yes sir Posted via Mobile Device

11-16-2012, 12:14 AM	#120
CMH77 Registered User Join Date: Sep 2012 Location: Springfield, IL Posts: 71	Re: parting out 68 c10 Do you still have #43. 67-71 Metal Front Door Panel Set - I have both, just haven't taken the other off of the truck yet. Some rust on the backside. - $20 If so, what condition (I didn't see pics). Also, would you ship, what would total cost be to 62704, and do you accept PayPal for payment? Thanks

11-16-2012, 09:09 AM	#121
bigjoe77 Registered User Join Date: Oct 2010 Location: Georgetown Kentucky Posts: 203	Re: parting out 68 c10 Yes, I still have the door panels. There is a little surface rustt on the backside, but could be cleaned up nicely. I'll get some more pics posted here soon. I'll check on shipping too. Thanks.

11-16-2012, 10:35 AM	#122
CMH77 Registered User Join Date: Sep 2012 Location: Springfield, IL Posts: 71	Re: parting out 68 c10 Thanks bigjoe77. Pending total cost, I want them.

11-16-2012, 11:06 PM	#123
bigjoe77 Registered User Join Date: Oct 2010 Location: Georgetown Kentucky Posts: 203	Re: parting out 68 c10 Pics of the door panels. I haven't removed the one from the door yet b/c I don't have the necessary tool. From what I can tell from feeling behind it, I believe that panel is better than the other.

11-17-2012, 01:37 PM	#124
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: parting out 68 c10 Hi joe got the parts thanks. Also, do you have the wire harness from the firewall to the battery and engine for this 68? What condition is it in? How much shipped to 93013 and I need the whole enchilada including any relays and junction blocks... Thanks Mo Posted via Mobile Device



Register or Log In To remove these advertisements.

11-17-2012, 09:42 PM	#125
bigjoe77 Registered User Join Date: Oct 2010 Location: Georgetown Kentucky Posts: 203	Re: parting out 68 c10 Hey Mo. Glad the parts made it. I'll check on that harness. There are so many damn harnesses on these trucks...

Register or Log In To remove these advertisements.