pictures from dave - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 03-02-2003, 06:19 PM

door popper

inside the door with picture of door solenoid

another picture of the door solenoid

cleaned up engine

electric fans mounted

LOHRTBT · 03-02-2003, 10:24 PM

Thanks Eric!

ChrisK10 · 03-02-2003, 10:25 PM

Hey that's lookin' pretty sharp, did you install a latchless door opener? One of those would be nice

-Chris

LOHRTBT · 03-02-2003, 10:32 PM

The fans are now operational off the Hayden relay/thermo controller. Works great!

They are very quiet.

I also installed yesterday the chrome cover that goes over the A/C unit... IF you ask me that is a killer addition...much better than the dull black sticker covered appearance from before. I have many plans for more chrome too. I added my chrome alt bracket and the mounting plate and am soon to have the pullies chromed as well as all mounting brackets and such and getting a chrome water pump as well as a set of Bowtie head chrome Bolts. They are a nice touch.

More to come.....

CT-Truckster · 03-02-2003, 11:27 PM

FINALLY!!!!hehe. hey you know i had thought of putting mine there and doing away with the inside handle but then i thought how the hell will i get out. but i am thinking going this route: doing away with the inside handles but running a safety pull to the latches mounted under the dash somewhere. since I have some door panels that are from a 89 burb and they have four window switches on the drivers panel, then i would have the lock switch, then four more switches which would be for:
one to control drivers window
one to control passenger window
one to pop drivers door open
one to pop passenger door open
on the passenger side door there would be no switches or handles as so no escape would be possible unless i wanted to drop someone of in a hurry. then i could pop the door and give'em a little shove, hehe.

**swervin ervin** · 03-02-2003, 11:33 PM

Lookin' good Davey. Glad to see you finally decided to do a little something. :p

84Stepper · 03-02-2003, 11:56 PM

Looks great Dave. How much were those electric fans?

LOHRTBT · 03-03-2003, 12:37 AM

I have nothing at all on my inner doors.

Just tweed. THe buttons are located in my console.

I know I did a few things today. Still need to get some things ..but it will happen a little faster now..well once I get moved. Now I need to talk my dad into letting me park my truck in the garage.

The fans were 70 each Haydens and the controller was 30..since its adjustable..the non adjustables are 15. That above pic was before I was done.. I have hidden all the wires now. I am going to buy a new 4 core radiator soon as well.

ocbaud · 03-03-2003, 12:45 AM

how well do the fans keep the thing cool?

LOHRTBT · 03-03-2003, 01:18 AM

very good...only on for a minute or so..and back off.

gchemist · 03-03-2003, 01:45 AM

I've got a question. Where did you get the serpentine belt setup for the alternator? I see that it's not a stock V-belt. The A/C compressor and the powersteering pump seem to be a V-belt.

79BIG10 · 03-03-2003, 04:24 AM

Dave I love the fan setup!! Looks like that's what I'll be asking for next!!! Heck of a price as well. Do you have the part numbers?

ocbaud · 03-03-2003, 08:44 AM

Quote:

Originally posted by gchemist
I've got a question. Where did you get the serpentine belt setup for the alternator? I see that it's not a stock V-belt. The A/C compressor and the powersteering pump seem to be a V-belt.

thats what mine looks like, as far as i know, its stock.

LOHRTBT · 03-03-2003, 10:05 AM

Yeah I have the part #'s....I will go get them real quick...
Hayden HDN3690 Elec fans 64.99 each.
Hayden HDN3647 Fan control
..you might have to pay a smidge more since I get good deals but they might work with you too.

So it cost me $175 total. You will need an extra inline fuse kit...2 bucks. and some butt connectors and extra wire if you choose to hide evertything like i did.

GMan....In 86...they started to intermix the two systems so the 86-87's and im sure the burbans have the combo of serp and vbelt combo.

chauffeur · 03-03-2003, 01:20 PM

[QUOTE]Originally posted by gchemist
[B]I've got a question. Where did you get the serpentine belt setup for the alternator?

gerardo, that's like a stock setup on my '86 sub. ken

C&C Chevy · 03-03-2003, 11:52 PM

Dave, did you buy those fans online or at a local store?

Nevermind, I see that Pep Boys carries them. Great looking set-up.

ocbaud · 03-03-2003, 11:56 PM

Quote:

Originally posted by C&C Chevy
Dave, did you buy those fans online or at a local store?

Nevermind, I see that Pep Boys carries them. Great looking set-up.

he got them from a car at a yard i think. forgot what car though

LOHRTBT · 03-04-2003, 12:25 AM

nOpe..Brand new at O reilly.

ocbaud · 03-04-2003, 12:35 AM

Quote:

Originally posted by LOHRTBT
nOpe..Brand new at O reilly.

oh, well, SO WHAT!

C&C Chevy · 03-04-2003, 11:38 PM

Hey, I know a girl that just started parts running for O'reilly's. Mabye she give me da hook up?

03-02-2003, 06:19 PM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	pictures from dave door popper inside the door with picture of door solenoid another picture of the door solenoid cleaned up engine electric fans mounted

03-02-2003, 10:24 PM	#2
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Thanks Eric! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-02-2003, 10:25 PM	#3
ChrisK10 1971 C20 Custom Camper Join Date: Mar 2003 Location: Ames/Shenandoah, IA Posts: 1,435	Hey that's lookin' pretty sharp, did you install a latchless door opener? One of those would be nice -Chris __________________ '71 Chevy C20 Custom Camper, 454, TH400 '97 GMC K1500 5.7L

03-02-2003, 10:32 PM	#4
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	The fans are now operational off the Hayden relay/thermo controller. Works great! They are very quiet. I also installed yesterday the chrome cover that goes over the A/C unit... IF you ask me that is a killer addition...much better than the dull black sticker covered appearance from before. I have many plans for more chrome too. I added my chrome alt bracket and the mounting plate and am soon to have the pullies chromed as well as all mounting brackets and such and getting a chrome water pump as well as a set of Bowtie head chrome Bolts. They are a nice touch. More to come..... __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-02-2003, 11:33 PM	#6
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Lookin' good Davey. Glad to see you finally decided to do a little something. :p __________________ Mike 1985 Chevy C-10 Last edited by swervin ervin; 03-03-2003 at 04:09 AM.

03-02-2003, 11:27 PM	#5
CT-Truckster ? Join Date: Jul 2002 Location: Dyersburg, TN Posts: 471	FINALLY!!!!hehe. hey you know i had thought of putting mine there and doing away with the inside handle but then i thought how the hell will i get out. but i am thinking going this route: doing away with the inside handles but running a safety pull to the latches mounted under the dash somewhere. since I have some door panels that are from a 89 burb and they have four window switches on the drivers panel, then i would have the lock switch, then four more switches which would be for: one to control drivers window one to control passenger window one to pop drivers door open one to pop passenger door open on the passenger side door there would be no switches or handles as so no escape would be possible unless i wanted to drop someone of in a hurry. then i could pop the door and give'em a little shove, hehe.

03-02-2003, 11:56 PM	#7
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Looks great Dave. How much were those electric fans? __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

03-03-2003, 12:37 AM	#8
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	I have nothing at all on my inner doors. Just tweed. THe buttons are located in my console. I know I did a few things today. Still need to get some things ..but it will happen a little faster now..well once I get moved. Now I need to talk my dad into letting me park my truck in the garage. The fans were 70 each Haydens and the controller was 30..since its adjustable..the non adjustables are 15. That above pic was before I was done.. I have hidden all the wires now. I am going to buy a new 4 core radiator soon as well. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-03-2003, 12:45 AM	#9
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	how well do the fans keep the thing cool?

03-03-2003, 01:18 AM	#10
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	very good...only on for a minute or so..and back off. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-03-2003, 01:45 AM	#11
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	I've got a question. Where did you get the serpentine belt setup for the alternator? I see that it's not a stock V-belt. The A/C compressor and the powersteering pump seem to be a V-belt. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

03-03-2003, 04:24 AM	#12
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	Dave I love the fan setup!! Looks like that's what I'll be asking for next!!! Heck of a price as well. Do you have the part numbers? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

03-03-2003, 10:05 AM	#14
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Yeah I have the part #'s....I will go get them real quick... Hayden HDN3690 Elec fans 64.99 each. Hayden HDN3647 Fan control ..you might have to pay a smidge more since I get good deals but they might work with you too. So it cost me $175 total. You will need an extra inline fuse kit...2 bucks. and some butt connectors and extra wire if you choose to hide evertything like i did. GMan....In 86...they started to intermix the two systems so the 86-87's and im sure the burbans have the combo of serp and vbelt combo. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-03-2003, 01:20 PM	#15
chauffeur Registered User Join Date: Sep 2002 Location: New Bedford, MA Posts: 43	[QUOTE]Originally posted by gchemist [B]I've got a question. Where did you get the serpentine belt setup for the alternator? gerardo, that's like a stock setup on my '86 sub. ken

03-03-2003, 11:52 PM	#16
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	Dave, did you buy those fans online or at a local store? Nevermind, I see that Pep Boys carries them. Great looking set-up. __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007 Last edited by C&C Chevy; 03-03-2003 at 11:55 PM.



Register or Log In To remove these advertisements.

03-04-2003, 12:25 AM	#18
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	nOpe..Brand new at O reilly. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

03-04-2003, 11:38 PM	#20
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	Hey, I know a girl that just started parts running for O'reilly's. Mabye she give me da hook up? __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007

Register or Log In To remove these advertisements.